Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!
Win Any MBRP XP Series Exhaust! Enter Daily

Cervini's Stalker Rear Valance - Unpainted (10-12 All)

AmericanMuscle no longer carries the Cervini's Stalker Rear Valance - Unpainted (10-12 All). Please check out 2010-2014 Mustang Body Kits for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Aggressive Stalker Styling
  • Fits Exhaust Tips Up to 4"
  • Durable Urethane Construction
  • OE Fit and Finish
  • Ships Unpainted
  • Made in the USA
  • Fits 2010-2012 V6, GT and Shelby GT500 Mustangs
Aggressive Stalker Styling. Complete the aggressive styling of your modern Mustang with Cervini's Stalker rear lower valance. This rear lower valance attaches to the factory bumper cover to add an awesome custom look that will be sure to turn heads on the street and on the track alike.

Fits 4" Exhaust Tips. Cervini designed their Stalker rear lower valance to accommodate aftermarket exhaust systems with tips up to 4" in diameter.

Superior Polyurethane Construction. Manufactured in the USA from high-pressure injected molded polyurethane for it's long lasting durability, this Cervini Stalker rear lower valance is shipped to you (or your body shop) unpainted.

Application. This Cervini Stalker Lower Rear Valance is designed to fit all 2010 to 2012 Mustangs including the V6, GT, and Shelby GT500 models. Ships unpainted.

Technical Notes. AmericanMuscle recommends professional installation of all body parts. We also recommended test fitting these products before they are painted.

Fitment: 2010 2011 2012 Details

MPN# 4397

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Rear Valence
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (24) Submit Your Photo

View All 24 Photos

More Products You Might Like

Questions & Answers (9)

5 Top Rated Questions

Paint? would it be possible to have american muscle paint the piece for an additional cost?

  • Unfortunately, this is not one of the products that we can pre-paint before shipping. Sorry about that!

Helpful (6)

V6 Convertible It shows that it fits a V6 however it shows with 2 exhaust openings.. Are there any that fits the V6 with only 1 opening?

  • No, they usually expect a duel exhaust kit would have been bought in a custom applictaion like this.

Helpful (2) Show 2 more answers

Can this fit a 2013?

  • This will only fit the 2010-2012 model Mustangs.

Helpful (0)

Does this part fix on 2014 pony?? Or you have other one for it???

  • This will not fit on the 2014 model Mustangs.

Helpful (0)

installation Hey, how will I install this part, will I tape it using 3M tape, or am I going to have to drill the bumper.

  • I would suggest taking the Cervini's Stalker Rear Valance - Unpainted (10-12 All) to a body shop for installing. There will be some drilling that will be required however, so consult with a trusted body shop for specifications.

Helpful (0)
Post Your Question
4 More Questions
Ground Clearance?? What's the ground clearance with this rear valance? How much lower than stock is it to the ground if any? 1 answer
Back up sensor? R there holes for the park assist? 1 answer
why won't this fit a 2013? Is the rear valence of a 2013 not the same as that of a 2012? Would this not fit a 2013 gt? 1 answer
roush axleback for v6 would this rear valence fit my roush exhaust? i believe it is larger than 4" but is it possible to cut the openings bigger? 1 answer

Recommended For You

Customer Reviews (4) Write a Review

Overall Rating 4.2

out of 5 stars

Installation Time:Full Day

Installation Cost:$250-$500

  • Fit 4.666667 4.7
  • Appearance 5 5
  • Bang For Your Buck 5 5

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $250-$500

    January 10, 2018

    Mostly good

    Gorgeous look and good fitment to begin with, but keeping the kit perfectly attached/aligned is a nightmare, especially with suspension on the car, drags all the time and is a constant chore of keeping the bumper aligned. From across the intersection it's very mean looking but upon a closer inspection you start to notice the misaligned body and the side skirts peeling off and it takes away from the car as a whole


    Year: 2012 Submodel: GT

    Helpful (3)

  • 3/5

    September 23, 2016

    Its ok BUT!!!

    You'll have to put in at least six more screws into the upper rim area around the valance because a gap of 1/8 of an inch is exposed. Two sided tape doesnt work. You have to use black head type screws around it. Otherwise you have this large gap where there is nothing to hold it on. Otherwise, its a good looking aftermarket valance.


    Year: 2012 Submodel: V6

    Helpful (4)

  • 5/5

    Installation Time: Afternoon

    November 19, 2015


    This part is excellent. It is a pretty good fit. It also looks very good.


    Year: 2010 Submodel: V6 IN

    Helpful (4)

  • 5/5

    Installation Time: Full Day

    September 20, 2013

    Nothing else like this on the market

    My body kit upgrades started out with a chin spoiler and side skirt splitters. It looked awesome but was needing a rear valance upgrade. I was not impressed when I went looking for one regardless of cost until I saw the Cervinis Stalker body kit. I couldn't afford the entire kit but had to have that specific rear valance due to the exhaust was made to go thru it rather than under it like the stock application. I thought it would match the other products I have purchased and installed but the styling is like nothing else out there. The Cervinis rear valance made the center of the car with the side splitters look to narrow and out of place. Don't make the same mistake I made and buy just one pcs, just bite the bullet and buy the entire kit. I just purchase the Cervinis side skirts, front bumper, black powder coated upper and lower grills with LED lights. I spent more money than if I would've bought the entire kit for $2499. My 3rd party cost for kit installation complete out the door was $1,400.


    Year: 2012 Submodel: V6 Naples, FL, USA

    Helpful (5)