(approx) 3 Hours
Light to Moderate mechanical skill required.
- How to install a Corbeau LG1 Racing Seat in your Mustang
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 17, 2019
My old tracks were rusted and very difficult to clean, so I decided to purchase these. I couldn’t be happier.... they bolted directly to both my car and seats without any modifications. They slide smooth, and the handle is easy to grasp while I’m sitting in the seat.Helpful (1)
December 04, 2019
THIS WILL REALLY HURT YOUR FINGERS!
Because why do we even need the tip of our fingers anyways right! Get ready to feel the metal snap on your finger tips and nails, its pretty painful. That is the ONLY faulty feature on this item, everything else is fine. You will remember this review when you get to use this lolHelpful (2)
October 14, 2019
The picture on the site is a little misleading: I was expecting a close match to my khaki leather interior but what I got was an awkward color match. The seats are more on the grey side but don't stand out too much when placed in the car (meaning its not a terrible/ugly difference). The seats are extremely comfortable and offer more lateral support than the stock seats. However, I feel like there is room for improvement as far as side bolstering goes. I was expecting a little more of a "hug" when I sat down but only really feel the side bolsters while turning. I still slide around a bit too much for my liking. I would still recommend these seats for anyone who wants a comfortable seat with durable vinyl and decent support for daily driving.Helpful (1)
October 02, 2019
These brackets fit perfectly to the stock assembly pattern and the Corbeau Trailcat seats. Very easy assembly.Helpful (3)
September 02, 2019
Fit great with Corbeau seats!
Must have!!! Made install easy and in just minutes new seats that slide. No more power seat problems.Helpful (3)
July 16, 2019
Quality brackets and perfect fit. Puts the seat height where it needs to be.Helpful (2)
July 11, 2019
Perfect Fit for Corbeau/SpeedForm Seats
100 as advertised, 100 satisfied with the fitment, 100 recommended to mount Corbeau/SpeedForm seats in a 99-04 GT.Helpful (2)
July 08, 2019
These seat brackets are made of pretty light weight material. Also, I was surprised that they had no attachment point for seat belts. I thought these brackets were very expensive especially since I also bought a pair of Corbeau seats. Unless you can build your own seat bases your stuck buying these things and adding a considerable amount to your seat purchase. But they do work.Helpful (4)
June 07, 2019
MUST W/ CORBEAU SEATS
START WITH REAR BOLTS WHEN MOUNTING. Slide well, made well. (Corbeau FORZA) Seats sat SLIGHTLY higher-helped with seeing front better.Helpful (3)
June 05, 2019
Easy to install
The brackets worked perfectly and made installing my Corbeau Racing Seats a breeze.Helpful (1)
sportys1 asked if this bracket came with a double lock mechanism and you said no. I noticed that Corbeau has one on their web site for an extra $20. Fits all Mustangs. If you are racing and cornering hard it is safer to have both sides locked. Will you be carrying it?
The Corbeau Seat Bracket Set that we offer does not come with the double locking options. It would be a good idea to get a double locking slider if you plan to do some aggressive racing with the car. We do not carry the double locking sliders at this time but keep checking back to our site, we are constantly getting in new products!
Double Locking Do these sliders have double locking or can they be upgrade to double locking?
Can I use this seat bracket to replace my motorized driver's seat assembly (so it becomes manually adjustable only)?
Yes, this can replace a motorized seat assembly.
I have a different make of seat that came with brackets but no bases. I would like to know if I can buy just the bases, and if not, are the brackets bolted or welded to the base ?
These Corbeau Seat Brackets are designed for installing Corbeau seats in all 1979 to 1998 Mustangs. If you do not have Corbeau seats these will not fit with the seats.
How close does the seat get to the steering wheel? I’m kind of short so I want to know will I be able to reach the pedals if I'm 5’7?
These brackets do not come with hardware. This will utilize the factory hardware, and hardware that comes with the Corbeau seats.
Each seat has its own specific bolt pattern and connection points so these would work for Corbeau seats.
The Corbeau Seat Brackets will provide slightly more leg room due to an extended length of movement from the track. headroom changes will depend on the seat you choose, but will typically be around the same as stock.
The Corbeau Seat Bracket Set are designed to work with all Corbeau seats, and will carry the standard Corbeau seat mounting pattern with bolt holes 13" apart front to rear, and 11 3/8" side to side.
The Corbeau Seat Bracket Set can be used with seat track extension kits, however this will raise the seat slightly higher than the bracket is designed to have them sit.
Yes, these Corbeau Seat Brackets are designed for installing Corbeau seats in all 1999 to 2004 Mustangs.
These are specifically designed for Corbeau seats. We would not be able to confirm fitment for any other seats.
With the additional of Corbeau seats, you will be losing all of your seat's functions aside from sliding forwards and backwards and reclining the seats. Keep in mind there are options of Corbeau seats we sell that do not come with the option to recline, so in these situations you would only be able to slide the seat forward and backward.
Hello! This is the Corbeau Seat Bracket Set. In order to best answer your question, we would need to know what Corbeau seats you were looking at, as well as the year and model of your mustang. Please give us a call at 1-844-494-7745
When the stock seat is removed, there will no longer be a sensor present for the airbags. If you leave the sensor disconnected, the airbags for that side of the vehicle will not deploy. If you would like the airbag activated, a resistor can be wired into the sensor to present a false sensor reading, which would ultimately deploy the airbag in that area in a collision, regardless if a passenger is in the seat or not.
(approx) 3 Hours
Light to Moderate mechanical skill required.
What's in the Box