Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$4,500 Giveaway! 3 Winners Enter Now

Modern Billet Dead Pedal Cover - Brushed (15-20 All)

Item 389290
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Market Price $40.99 You Save 15% ($6.00)
Our Price


FREE Shipping on orders over $49

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Race Inspired Styling
    • Heavy Gauge Stainless Steel Construction
    • Brushed Finish
    • Simple Peel-N-Stick Installation
    • Made In The USA
    • Fits All 2015-2020 Mustangs

    Review & Installation Video

    Review & Install Video

    Hey, guys. Stephanie with, here with this dead pedal cover for all 2015 and up S550 Mustangs. Some of you may have never noticed this before, but the pedals don't all match in the S550. The dead pedal is plain, while the other pedals have stainless steel covers on them. This is a brushed stainless steel dead pedal cover that matches the other pedals in the Mustang, so while it's not a mod that's gonna stand out to everyone, it is noticeable to those with a trained eye. So this is going to be a great option for those of you out there that pick up on the small little details and just want to add a little touch to the interior.Before seeing this product on the table here, I assumed that it was going to be a thin piece of metal, but it's actually a heavy duty gauge stainless steel. I wouldn't be worried about this flexing and breaking since it has some strength and durability to it. It's stainless steel and the brushed finish will match the other pedals, but it's also not going to tarnish or fade or rust. So if you've got a daily driver, you don't have to worry about that.As far as price, finally there's a mod for the S550 that's cheap. You're looking at spending under $50 for this cover, which is nice considering it is stainless steel and it is for an S550. There are some other dead pedal options that are available on the site. There's a polished one if you like that better, or you can always get a whole pedal set and just change the pedals all together if you want. I personally like the brushed finish, since it won't look bad if it gets a little dirty in between cleanings.The install here is really pretty easy. Now this does apply with 3M tape, so you will need to have a clean surface and use the adhesion permitter that this comes with. Once the surface is prepped, it's just a matter of pulling the backing off the 3M and pressing the cover into place. Overall, this is a one wrench install on our scale here and should take just about five minutes to complete.Wrapping things up here, this dead pedal cover is a stainless steel cover that will match your dead pedal with the rest of the pedals in your S550. It's a brushed finish and the material will hold up without tarnishing or fading. You can check it out more online, along with all your other S550 interior upgrades, right here, at

    Race Inspired Styling. Add impressive race inspired styling to the interior of any 2015-2020 S550 Mustang with a Brushed Stainless Steel Dead Pedal Cover. This dead pedal cover matches the existing bright work of your Pony's interior for a clean sharp custom appearance.

    Superior Construction. Manufactured in the USA from high quality heavy gauge stainless steel for superior strength and durability, this Mustang Dead Pedal Cover is completed in a brilliant brushed finish that will not tarnish, fade or rust.

    Easy Peel And Stick Installation. Simply peel the two sided 3M tape from the back and set in place over top of the factory dead pedal for an easy 5 minute installation. Go from plain boring stock to show winning custom in just minutes.

    Application. This Brushed Stainless Steel Dead Pedal Cover is designed to fit all 2015 to 2020 Ford Mustangs, including the V6, EcoBoost, GT and Shelby models. Sold individually.

    Modern Billet

    Fitment: 2015 2016 2017 2018 2019 2020 Details

    MPN# 389290

    CA Residents: WARNING: Cancer and Reproductive Harm -

    What's in the Box
    • (1) Dead Pedal
    Installation Info
    Will it fit my Mustang?

      Customer Photos (35) Submit Your Photo

      View All 35 Photos

        Questions & Answers (7)

        5 Top Rated Questions

        Where do I find the matching gas, brake, clutch and dead pedal set (Brushed Stainless ) as shown in your photo ? Thanks, Dave

        • The 15-17 Premium GTs came with chrome clutch,gas,and brake pedals from the factory. The Dead Pedal Cover is made to match that, which is what you see in the picture.

        Helpful (4)

        I have ecoboost premium. should i buy the brushed or polished to match with other pedals?

        Would this fit a UK RHD 2016 GT?

        • The Dead Pedal Cover, has only been tested on the US variants. We would not be able to guarantee the fit on any RHD mustangs.

        Helpful (0)

        Do you sell the matching pedals for manual transmission to go with dead pedal? What is the difference between the brushed polished? Does AM sell a set of four pedal covers (dead pedal, clutch, brake and gas), in this style or similar?

        • We do not have any pedal covers that will match the style of the Dead Pedal Cover at this time. A brushed finish will look more textured and a polished finish is shiny. We do not sell a kit that comes with all 4 pedals at this time. We are constantly getting in new items, so keep checking back to our site!

        Helpful (0)

        do you sell matching pedals for automatic transmission to go with dead pedal?

        • Unfortunately we currently do not have the matching petals to go with this dead pedal.

        Helpful (0)
        Post Your Question
        2 More Questions
        I have a 2016 GT premium. Which option matches the stock pedals better - brushed or polished? 1 answer
        Hello, What is the difference between the brushed and Polished dead pedal cover?? I have the Ford OE Sport pedals (manual transmission) with the black stripes in the middle (just like in the Photo). I just want to make sure I purchase the correct one that matches my pedals. 1 answer

          Customer Reviews (100+) Write a Review

          Ratings Summary

          4.7 out of 5 overall rating from 100+ customers

          Installation Time: Less than 1 Hour

          • January 04, 2020

            1 2015 GT - Stephen Installation Time: Less than 1 Hour

            Doesn't Stick

            I followed the directions and cleaned the surface as directed. I feel like the holes were too small, because part of the dead pedal was bowed up in the middle. I got it to sit half way even (again, pretty sure the middle of the petal wasn't touching the plastic) and used the 3E applicator as directed. It looked great. I got in the car an hour later to move it, and found the pedal laying on my carpet. Nowhere in the directions (or on the 3E applicator tube) does it say to not install it in colder weather. My garage is 46 degrees currently.

            Helpful (0)
          • December 11, 2019

            5 2019 GT - JohnD19GT Installation Time: Less than 1 Hour


            Easy install! Just clean everything up well before applying

            Helpful (0)
          • November 30, 2019

            5 2017 GT350 - BartJ Installation Time: Less than 1 Hour

            Matching Dead Pedal

            This looks factory with the other 3 pedals should have always been this way!

            Helpful (0)
          • October 10, 2019

            5 2017 EcoBoost - TomL Installation Time: Less than 1 Hour

            Great addition

            This Dead Pedal is a great addition. The brush metal fits in perfectly with the other brush metal trim I've installed.

            Helpful (0)
          • September 28, 2019

            5 2016 GT350 - C013RA Installation Time: Less than 1 Hour

            It's what the factory dead pedal should have been.

            Super easy install only took a few minutes and it looks great. This is what Ford should have done.

            Helpful (1)
          • September 19, 2019

            5 2019 GT350 - LICobra Installation Time: Less than 1 Hour

            Brushed Dead Pedal

            I bought a brushed dead pedal for my 15' GT/PP 4 years ago and it fit and looked great to fill that void on the plain black dead pedal, I recently purchased a 19' GT350 and installed another brushed dead pedal....great dress up and extremely easy to install in 15 minutes

            Helpful (0)
          • August 25, 2019

            5 2017 GT - Kara Installation Time: Less than 1 Hour


            Bought this for my 17 Gt premium with manual. The stock pedals are brushed aluminum not polished and this is an exact match to the other three factory pedals! Perfect!

            Helpful (0)
          • August 22, 2019

            5 2015 GT - meanbgreen Installation Time: Less than 1 Hour


            al lgood so far. Some of the 3m tape was bit damaged when arrived, however so far its staying on.

            Helpful (0)
          • June 14, 2019

            5 2018 EcoBoost - EugeneG Installation Time: Less than 1 Hour

            Matches and looks nice

            Ok. One of the things that I have not been impressed with in the Mustang world of aftermarket parts is the general low quality and install issues of in general. This easy to install item is one of the rare exceptions. Easy install and if prepped properly, secure . Well made item that matches my other pedals. This one is a real thumbs up

            Helpful (0)
          • June 04, 2019

            5 2019 GT - GreenNineteen Installation Time: Less than 1 Hour

            Fine and Fit

            Goes on easy and looks like it came OEM, and goes well with brake and accelerator pedals.

            Helpful (0)
          • May 07, 2019

            4 2019 GT - MustangChris838 Installation Time: Less than 1 Hour

            Looks Great, but...

            Dead pedal cover looks great, but feels a little cheap. Feels like the pedal flexes under my feet

            Helpful (0)
          • May 06, 2019

            4 2017 GT350 - DavidE Installation Time: Less than 1 Hour

            Almost perfect

            The cover is of excellent quality and the fit, tone match were spot on. The only issue was the first pedal cover had a defect on the adhesive side which I had to return which tainted the overall experience. Breeze to install.

            Helpful (1)
          • April 30, 2019

            5 2015 EcoBoost - OweL Installation Time: Less than 1 Hour

            Made in the USA

            Total surprise ! Expected this to be made in China , but no way ! A card with a picture of a young man that had proudly made this pedal cover in the USA, was attached to the product . Very impressive . Fit and finish is perfect and the brushed finish matches the factory pedals . Highly recommended !

            Helpful (0)
          • April 05, 2019

            5 2016 GT - AshL Installation Time: Less than 1 Hour

            A Perfect Match

            High quality materials and good installation instructions make for a little easy bling in the footwell. As usual, preparation is the key to a trouble free installation. Clean thoroughly, per the instructions, and the space-age adhesive will do its job.

            Helpful (0)
          • March 07, 2019

            4 2016 GT - Mick Installation Time: Less than 1 Hour

            Dead pedal cover

            Received pedal cover timely. Product was as advertised. Install went ok however one problem came up immediately.. the adhesive prep tube was old and dried out. I cleaned the surface twice and applied anyway. So far so good. AM - please note that the product is only as good as the quality of the preparation process, please check your dates on adhesion prep tubes.

            Helpful (2)
          • February 27, 2019

            3 2019 Bullitt - Bruce Installation Time: Less than 1 Hour

            Nicer than factory but does not match the pedals

            This item makes the footwell area look much better. Unfortunately, it is polished stainless which has a chrome-like finish, while the pedals (and pretty much everything else with a metal look on my Bullitt) is brushed aluminum look.

            Helpful (0)
          • January 31, 2019

            4 2019 GT - DebraC Installation Time: Less than 1 Hour

            Dead Pedal Review

            I'm keeping it. It looks good on but I misread the description when I bought it. I thought it was all 3 pedals, not just the dead. Kind of expensive in my opinion. It's is just the one pedal, with a hella adhesive sticker on the back. Easy apply.

            Helpful (1)
          • January 17, 2019

            5 2019 Bullitt - JamesW Installation Time: Less than 1 Hour

            Dead Pedal Cover

            Easy install and fit was perfect! Brushed aluminum matched well with foot pedals.

            Helpful (2)
          • January 09, 2019

            4 2015 GT - Eugene Installation Time: Less than 1 Hour


            Apparently I’m one of the few people that got a bad cut and it did not just “fit in place”. I’m not going to give this a bad review as mistakes happen and it did look good even though it didn’t fit properly. Big shout out to AM for a simple return process.

            Helpful (2)
          • January 04, 2019

            5 2018 GT - JosephS Installation Time: Less than 1 Hour

            Great quality

            This dead pedal cover helps complete my Mustang's great interior look!

            Helpful (2)

          Related Mustang Categories