Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set (79-84 4.2L, 5.0L Mustang)

Eliminate Chain Stretch. This Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set is a solid-bushing chain designed to eliminate chain stretch by rolling with the sprockets. By eliminating chain stretch, your Mustang will be protected from misfires, power loss, and other performance-reducing problems.

Quality Build. Timing chains are notorious for stretching and loosening over time. This set is constructed with 35,000 PSI tensile strength cast iron in the cam sprockets, as well as induction heat-treated billet steel in the crank sprockets, with the quality you can expect from Edelbrock to ensure long-lasting durability. The Performer-Link Timing Chain Set is designed to operate up to 6500 RPM.

Accurate Timing. This product has three keyway setting points, allowing you to be as exact as possible when installing the timing chain for a specific timing selection.

Moderate Installation. Please refer to Edelbrock’s Installation Instructions when installing this product on your Mustang. Improperly installed timing chains can cause early failures. Never hammer directly on the product, or use a sleeve for installations that require hammering. Be careful to never stretch the chain and always check the clearance between the chain and the block as well as the front cover.

1-Year Warranty. Edelbrock stands behind the quality of the Performer-Link Adjustable True-Roller Timing Chainset with a 1-Year warranty. Exclusions may apply. Check with the manufacturer for full details.

Application. The Edelbrock Performer-Link Adjustable True-Roller Timing Chain Set is designed to fit all 1979-1984 4.2L and 5.0L Ford Mustang models and can be used with both Edelbrock and stock cams.

Fitment:

• 1979 Ford Mustang
• 1980 Ford Mustang
• 1981 Ford Mustang
• 1982 Ford Mustang
• 1983 Ford Mustang
• 1984 Ford Mustang

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov