FST Performance FloMax300 Fuel Filter System (Universal; Some Adaptation May Be Required)

The RPM300 is a compact, high flow/low restriction system that filters down to 4 microns, unheard of in the performance/racing industry.

Overall Compact Size: 4 ¼” tall x 3” wide x 3 ¾” deep
Weighs: 19 oz
Base/Manifold: Red, Billet 6061-T6 aluminum base/manifold. Not a casting. Mounting holes: 7/16" - 2 inches center to center
Stainless steel filter adaptor
Flow: 300 gallons per hour (1,800 - 1,875 lbs per hour)
Filtering: 4 Micron FloMax™ media (gasoline-methanol-ethanol compatible!)
Filter media surface: 183 sq in. FloMax™ enhanced water-stripping cellulose.
Water Separation: FloMax™ Actually separates water to the “quiet” zone for water & heavy contaminates to settle. Not water blocking (which actually blocks the fuel).
Burst: 250 psi (ideal for fuel injection or carburetor)
Ports: Multiple (2-In, 2-Out) ½” NPT (pipe thread) so that brass fittings can be used to splice into your existing fuel line and the ability to add accessories like fuel pressure gauges, etc.
Replacement FloMax™ spin-on type filter: (# RF300) for ease of changing. Nothing to service or clean out, eliminating the chance for fuel system contamination.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov