Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win 1 of 3 Exhaust Kits! Enter Daily!

GMS Driveshaft Safety Loop - Front (05-14 All)

AmericanMuscle no longer carries the GMS Driveshaft Safety Loop - Front (05-14 All). Please check out 2005-2009 Mustang Driveshafts for an updated selection.
This item currently can not be added to your cart. Please try again later.

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.

Features & Details

  • Added Security
  • Heavy Duty Steel
  • Durable Blue Powdercoat Finish
  • Meets SFI Specifications
  • Bolt-On Installation
  • Fits All 2005-2014 Mustangs
Added Safety. When pushing your Mustang to the limit at the track or just cruising down the highway, make sure you take a precautionary step by installing a Granatelli Motor Sports (GMS) Front Driveshaft Safety Loop. GMS designed this blue Safety Loop to contain your driveshaft in an event of a driveshaft failure, which could cause an accident and bring harm to you and others alike.

Quality Construction. GMS manufactures this Front Driveshaft Safety Loop from quality heavy duty steel and features precision welds for superior strength. The Safety Loop and brace are finished in a blue powdercoat finish for long lasting resistance against corrosion.

SFI Specifications. If you're using this Safety Loop for high performance or racing applications, SFI Certification is critical so you can run your Pony at the track or strip. You will be happy to know that this loop meet SFI specifications.

Bolt-On Installation. GMS designed this Safety Loop to be a simple bolt-on with the use basic hand tools in about an hour or two. All of the necessary hardware is included for installation.

Application. This GMS Front Driveshaft Safety Loop is designed to be used on all 2005-2014 Mustangs, including the V6, GT, Bullitt, Boss 302 and Shelby GT500 models.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

CA Residents: Warning: California's Proposition 65

What's in the Box
  • (1) Safety Loop
  • (1) Brace
  • Necessary Hardware
Installation Info
Will it fit my Mustang?

You Might Also Like

Customer Photos

Q & A

No questions about this product yet.

Ask the First Question

Customer Reviews (2) Write a Review

Overall Rating 3.5

out of 5 stars




  • 2/5

    February 03, 2017

    Keep looking

    I hate to say this but, keep looking. This product is not designed very well. It attaches to the car buy using the heat shield studs. The fwd studs are too short to even get the first thread of a nut started. I took a grinder and made the loop bracket thin enough to get a few threads in front. I wonder how well this would hold the shaft if it failed. I think it would just rip off the studs. At least crawl under your car and look at the studs for the heat shields before you buy and keep in mind that this thing is over a 1/4'' thick.

    Jim

    Year: 2014 Submodel: GT

    Helpful (3)

  • 5/5

    July 19, 2016

    Safety first

    I recently added this with the addition to a 1 piece driveshaft. I like it because it adds safety to keep the driveshaft from being thrown into the ground if it were to fail. The fitment was superb and the install was simple

    Cgraver

    Year: 2012 Submodel: V6

    Helpful (3)

Related Mustang Categories