Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

K&N Series 63 AirCharger Cold Air Intake (15-17 Mustang V6)

Item 390933
AmericanMuscle no longer carries the K&N Series 63 AirCharger Cold Air Intake (15-17 Mustang V6). Please check out 1986-1993 Foxbody Mustang Cold Air Intakes for an updated selection.
Verify parts fit and get product recommendations.
Mustang Sales Techs: Connect Now M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00

    Product Information

    Features, Description, Reviews, Q&A, Specs & Installation

    Features

    • Increases Throttle Response
    • Improves Horsepower and Torque
    • Series 63 Aircharger Kit
    • Free-Flowing High Density Polyethylene Intake Tube
    • Oiled Air Filter Removes Harmful Contaminants
    • Filter is Washable and Reusable
    • NO Computer Tune Required
    • Not CARB Certified, Thus Not Legal For Sale or Use in California
    • Simple Bolt-On Installation
    • Fits All 2015-2017 V6 Mustangs

    Description

    Improves Horsepower And Torque. Boost the power numbers of your 2015-2017 V6 Mustang by installing a K&N Series 63 AirCharger Performance Intake. This AirCharger Intake replaces your 3.7L Mustangs restrictive factory intake and airbox with a free-flowing polyethylene intake tube and a high flow K&N filter assembly. Not only will you see an increase in power you will also experience an improvement in throttle response and engine sound, all while still providing excellent air filtration. A Series 63 AirCharger is a great choice for those performance minded V6 owners who are looking to get a little more power out of their pony.

    No Tune Required. Unlike other Cold Air Intakes on the market for the 3.7L V6 Mustangs this K&N Series 63 CAI does not require a computer re-tune. The engineers at K&N really did their homework to improve your pony's power using the factory tune.

    Filters Out Harmful Contaminants. The supplied K&N Filter successfully filter's out harmful contaminants with it's unique layered design. K&N Air Filters are made up of layers of specially treated cotton gauze that are sandwiched between two epoxy-coated aluminum wire screens for durability. K&N uses a specially formulated grade of oil to treat the cotton gauze layers which causes a tackiness throughout the cotton's microscopic strands creating a powerful filtering media that ensures engine protection.

    Washable, Reusable Filter. K&N designed their high flow air filters to be reusable. That means there is no need to buy a new filter every few thousand miles, you can just clean the filter, re-oil it, and save money with a K&N Filter Recharge Kit.

    Straight Forward Installation. Designed to be a direct fit replacement for the factory intake this K&N Series 63 Aircharger Cold Air Intake Kit installs with just basic hand tools. No extra modifications or special tools are required for an easy 1 hour installation. All necessary parts and instructions are included.

    Recommended Upgrade. Even though a re-tune is not required for operation, AmericanMuscle recommends a custom tune with a Mustang Handheld Tuner. By reprogramming the vehicles computer (ECU) to you will get the best possible power and performance increases from this cold air intake.

    Application. This K&N Series 63 Aircharger Cold Air Intake kit is specially designed to fit the 2015 to 2017 Mustang's equipped with the 3.7L Ti-VCT V6 engine. No computer retuning required.

    Technical Note. This K&N Cold Air Intake is not legal for use in California or other states adopting California emission standards.

    Note: Coupon codes cannot be applied to this product.

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Installation & What's in the Box

    Installation Info

    What's in the Box

    • (2) Hose Clamp #48
    • (1) Hose; 3" id x 2" l Reinforced
    • (1) Intake Tube
    • (1) Vent; strt, 1/4 NPT to Quick Release
    • (1) Vent; 1/4 NPT to Quick Disconnect
    • (2) Hose Clamp #56
    • (1) Hose; 3-1/2" id x 2-1/2" l Hump
    • (1) Edge Trim (66")
    • (2) Bolt; m6 x 1.00 x 16mm, SS
    • (5) Washer, M6 Split Lock Zinc
    • (5) Washer; 6MM Flat, SS
    • (1) Heat Shield
    • (2) Bolt; M6 x 1.00" x 20MM Hex, SS
    • (1) Spacer: .625" od x .250" id x .250" l
    • (1) Bracket; Small "L", 63-2589, Stl
    • (1) Bolt; 6MM-1.00 x 16MM, SS
    • (1) Bracket; 'L", 63-2589, Stl, TB/PC
    • (1) Bolt; 8MM-1.25 x 16MM, Hexhead
    • (1) Washer, M8 Split Lock Zinc
    • (1) Washer; 8MM, Flat, SS
    • (1) Adapter; Universal, 6" Filter 3.5"
    • (1) Hose Clamp #104
    • (1) Air Filter

    Tech Specs

    Cold Air Intake Specifications
    Year/Model:2015-2017 V6Filter Placement:Engine Bay
    Material:High density polyethylene plasticFinish:Black Finish
    Manufacturer:K&NComputer Tune Required:No
    4.7

    Customer Reviews (299)

      Questions & Answers

      10 More Questions

          Related Mustang Categories