Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!
Win Any MBRP XP Series Exhaust! Enter Daily

Steeda Strut Tower Brace - 3 Point (03-04 Mach 1)

AmericanMuscle no longer carries the Steeda Strut Tower Brace - 3 Point (03-04 Mach 1). Please check out 1999-2004 Mustang Strut Tower Braces for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Eliminates Suspension Flex
  • 4130 Chrome-Moly Alloy Steel Construction
  • Black Powdercoat Finish
  • Fits 2003 to 2004 Mach 1 Mustangs
  • Made in the USA
Reduce Body Flex. When your carving the corners the last thing you want to feel is chassis flex when you rev the engine. This Steeda 3 Point Strut Tower Brace is designed specifically for the Mach 1 to reduce that unwanted body flex. And is a must for all Mach 1 owners.

Quality Construction. The Mach 1 Mustang Strut Tower Brace is made in the USA from super strong 4130 chrome-moly alloy steel tubing to keep your front end from flexing from the torque of your motor and is finished with a classic black powdercoat finish for great looks and durability.

Simple Installation. This Steeda Strut Tower Brace is a simple bolt-on that clears the factory intake manifold and is easily installed with basic hand tools. Minor cutting and drilling is required.

Note: Coupon codes cannot be applied to this product.

Fitment: 2003 2004 Details

MPN# 555-5714

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
Hardware included:
  • (8) Eight Hex Bolts
  • (8) Eight Nuts
  • (8) 3/4" Washers
  • (8) 7/8" Washers
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (2) Submit Your Photo

View All 2 Photos

More Products You Might Like

Questions & Answers (5)

5 Top Rated Questions

Will this product clear aftermarket intakes? Will this brace have enough space to clear aftermarket intakes such as the C&L Ram Air intake or their Cold Air?

  • Yes this brace will fit any cold air intake that sits in the stock location.

Helpful (1)

Hey guys will this bar clear the c L intake?? I'm about buying it. Thanks

  • This strut tower brace will not clear the C&L cold air intake.

Helpful (0)

Will this fit the JLT cold air intake?

  • The Steeda Strut Tower Brace will work with the JLT Cold Air Intake.

Helpful (0)

work on gt with shaker? will this work on a 2002 gt with the shaker system?

  • No, this Steeda Strut Tower Brace is designed to only fit 2003-04 Mach 1 Mustangs

Helpful (0) Show 1 more answer

Will this fit with my Kenne Bell 2.1 Supercharger? Will this Strut Tower brace fit between my KB 2.1 and the Shaker hood scoop. It's attached to the blower with brackets and there is about a 3 inch space between.

  • The Steeda Strut Tower Brace - 3 Point (03-04 Mach 1) will work with the Shaker hood scoop as it sits under the Shaker however it will not fit with the KB 2.1 supercharger because the brace will interfere with the supercharger.

Helpful (0)
Post Your Question

Recommended For You

Customer Reviews (3) Write a Review

Overall Rating 5

out of 5 stars

Installation Time:Afternoon

  • Handling Improvement 4 4
  • Fit 5 5
  • Bang For Your Buck 4 4

  • 5/5

    Installation Time: Afternoon

    July 30, 2012

    Fits great if you don't have an aftermarket intake tube

    The strut brace came with good instructions. the only real modifying you have to do is cutting a square chunk out of the plastic in the back of the engine bay so the bar can be bolted directly to the car, which was in the instructions. after that you just need to mark your holes and drill through the strut towers, I was able to get the bolts on without removing the wheels. the problem I ran into was that I had a C&L cold air intake, and without grinding down the intake tube the strut bar wasn't going to fit. instead of doing that I just put my old stock rubber intake tube back on. I should have researched that more before I bought the strut brace but its an easy choice between better handling vs something flashy under the hood. There are currently no aftermarket intake tubes that will fit with the three point strut brace without modification. C&L, K&N, JLT will not fit with it.


    Year: 2003 Submodel: Mach 1 Barre, VT

    Helpful (11)

  • 5/5

    March 16, 2011


    Great brace, the car feels so solid, no rattling, or vibrations, big improvement on handling


    Year: 2003 Submodel: Mach 1

    Helpful (7)

  • 5/5

    January 07, 2010

    Steeda 3 Point

    The brace is super strong. It comes with good bolts, washers, and nuts. You need a small drill with short bit in order to drill the holes by the firewall. If all you have is a regular drill, be prepared to take off the intake manifold or get a new drill. You also have to take the wheels off to get inside the shock towers to put the bolts on. However the install was well worth the strength and improvement in handling. Great brace!


    Helpful (9)

Related Mustang Categories