Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install Modern Billet Brushed Door Sill Plates on your 1994-2004 Ford Mustang

Installation Time

30 minutes

Step 1:

Remove the inner plastic factory trim by pulling up as shown.


Step 2:

Remove the outer plastic factory trim by prying gently with a plastic scraper or similar.


Step 3:

Thoroughly clean the surface where the outer trim was attached, removing the left over adhesive. 

Step 4:

With the surface clean, wipe down the area with the supplied alcohol prep pads. Remove the backing from the 3M tape on the new sills and place them on the door sill a shown. Press down firmly to fully seat the adhesive.


Step 5:

Replace the factory plastic inner trim to complete the installation.

Best Sellers