(approx) 4 Hours
Light to Moderate mechanical skill required.
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1994 1995 1996 1997 1998 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
December 08, 2019
NOT AS DESCRIBED
I purchased an open box special with no hardware (my current MMD styling bar sustained damage and I was replacing it). It was described as Very Good Condition. It arrived with cuts in the upholstery/leather. It looks like it was done with a razor knife (perhaps opening the package and then returned). That is not VERY GOOD condition. I have contacted customer service so we will see if I can edit this or if I will ever purchase from here again.Helpful (1)
June 06, 2019
Expect the worst
The instructions are mess, the color pictures are dark, hard to see details. Removing the interior - easy. Drilling the B pillar holes, the instructions some what clear. Drilling the holes in the plastic rear panels, easy to drill into the plastic. CAUTION CAUTION and CAUTION - the 1 inch holes in the rear panels are to access the bolt holes in the B pillar bracket, HERE IS WHERE THERE IS A BIG PROBLEM, the template holes used to drill into the rear panels did not match the bracket holes!!! Once all the holes are drilled in B pillar and rear panels, another problem surfaced, the shape of the styling bar is to wide as noted in MANY reviews. I suggest a test fit with out installing the panels. LAST THE WORST OF ALL, the B pillar brackets are JUNK !!!!!!!!!!!! The “nut” is tack welded onto the the steel plate, over tighten and they break off!!!!!! Remember these 2 tiny tack welds per “nut” are the ONLY way the bar stays in place. A very weak point where the most strength is needed. Install not done. I need to have all the “nuts” rewelded. I do not recommend this product.Helpful (5)
May 26, 2019
Perfect addition for the Mustang body.
I purchased this a while back and just now decided to write a review. This add on really makes mustang stand out from other convertibles. Like the title states, it's a perfect addition.Helpful (2)
May 10, 2019
Styling bar is a good safety plus and it was quite easy to install.Helpful (4)
April 25, 2019
Bad Instructions and Not Advertised Color
Instructions weren't exact. I would expect the install kit to be good after spending over 300 dollars on it. The color was also darker than expected. It was a pain to install, but in the end it still looked nice.Helpful (3)
March 17, 2019
Love the look, install horrible!!!
It looks perfect! Exactly like I expected...my dad and husband are very handy and watched YouTube video but the holes didn’t line up at the end! They eventually got it but said they would never do it again!Helpful (8)
March 03, 2019
MMD Styling bar
Very high quality product. Installation was a breeze thanks to the online video. Highly recommend this product!Helpful (2)
February 27, 2019
Looks nice - install is a PIA
Final look is awesome - so 5 stars for that...but install is 2 stars...the directions aren't very good - so do yourself a favor and watch the You Tube video instead. Couple things to watch out for to make the install easier. the actually work isn't bad - but the lining up of the screws and ensuring the holes you make in the trim have to be spot on. The template is mediocre - so measure multiple times before you cut the holes. Also - when you install the bracket - the kit provides a rivet to hold it in place - don't bother - get a tap screw instead to hold the bracket in place. I took the liberty of drilling another hole in the car through the bracket and using a tap screw both at top and bottom of bracket. If you do that it will save u headache if bracket shifts. I learned the hard way that's why i give install 2 stars. not hard - but tedious to align holes with screws. Once you have that - its pretty simple.Helpful (4)
January 27, 2019
It fits nice thank you guys
Your item is great nice fit looks great I took my time to install to do it right easy to read copies and I can't even readHelpful (1)
November 01, 2018
2004 Mustang Convertible Style Bar
Excellent product.... looks good , fits we.. There are install tips on You Tube.... be sure to watch to avoid mistakes in enclosed instructions. VERY IMPORTANT!Helpful (6)
My bar light bulb is not working how do I replace the bulb in bar?? Thanks 2001 mustang.
This Styling Bar does not have an integrated third brake light.
I have a Ford Factory sound system with 2 speakers on each side, right behind the door where the mounts for the styling bar are situated. Will it still fit into my Mustang?
Hi, This MMD Convertible Styling Bar can be used with your Mustang this bar will get mounted behind the the panel that holds the speakers.
Is it functional? I don't plan to, but if I were to rollover would the bar prevent me from getting crushed by/stuck under my car?
It is not functional. If your looking for rollover safety I would suggest a roll cage.
Top Are you able to close the top, after the bar is installed? Thank you!
Absolutely - the styling bar and light bars do not hinder your convertible top from being fully functional.
Do you know what size the socket head cap screws are? I misplaced one, and need to get another to finish the install. Thanks!
MDD does not offer the sizing for their hardware, so you would just need to take the other one you have and look to have it matched.
Yes, The MMD Styling Bar can be painted, however you must vinyl paint.
Hello! Unfortunately, the hardware is not sold seperately. Your best bet would be to try to source them at a hardware store.
At this time we do not offer other color options.
I would stick with soap and water, as the chemicals in many cleaning products can start to fade this out faster than normal.
You are correct, the installation of the MMD Convertible Styling Bar - Charcoal (94-04 GT, V6, Cobra) would create limitations between how far back your seat can go and your access to your seat belt.
You will need these tools for the install of this bar: ¼" Drive Ratchet Pop Rivet Tool¼" Drive 3" Extension Drill Motor¼" Drive 10mm Socket** Drill Bits 1/8", 19/64"*, 13/32"*¼" Drive 7mm Socket ¾" Hole SawT-25 Torx Bit* 1" Hole Saw3/8" Drive Ratchet 1 ¾" Hole Saw3/8" Drive 3" Extension Door Trim Tool (Fork Tool)T-50 Torx Bit Center Punch¼" Allen Wrench HammerWire Crimper Putty Knife3/8" Drive 18mm Socket
Yes, only if you use a vinyl paint. The bar has a vinyle exterior coating.
(approx) 4 Hours
Light to Moderate mechanical skill required.
What's in the Box