How to Install MMD by FOOSE Side Scoop - Pre-Painted on your Mustang

STEP 1.

Wipe the tape ledges on the scoop and paint surface where the scoop will mount with the provided alcohol wipes followed by adhesion promoter. **Note: A clean surface is essential for proper adhesion.

STEP 2. 

Apply the supplied tape as seen below. 

STEP 3. 

Remove the tape backing from the insert and install the insert to the side scoop. 

STEP 4. 

Fit part before removing tape backing. **Note: While sliding the scoop up and down, you will notice where the scoop fits best on the body line. 

STEP 5.

While holding the bottom against the body line, line up the top of the scoop just behind the door edge.