Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win 1 of 3 Exhaust Kits! Enter Daily!

Silver MMD V-Series Stripes (15-19 All)

Market Price $149.99 You Save 13% ($20.00)
Starting At

$129.99

FREE Shipping

  • Item 386527

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.

Will this fit your Vehicle?

In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • MMD V Series Stripes
    • Tapered to Accentuate the Lines of the Car
    • Gloss Silver Appearance
    • 4 Mil Wrapping Cast PVC Vinyl Material
    • Built-In Protective Clear Coat Layer for Up to 8 Years Outdoor Durability
    • Air Release Technology for a Smooth Wrinkle-Free Surface
    • Pre-Cut for Ease of Installation
    • Fits All 2015-2019 Mustangs

    Review & Installation Video

    Review & Install Video

    Hey, Stephanie with AmericanMuscle.com, and this is my review of the MMD V Series Stripes for the 2015 and '16 Mustang. The MMD V Series Stripes are going to be for any S550 owner who's looking for some exterior styling but maybe wants to do a little something different. The V Series Stripes are the same stripes, of course, that are on MMD's V Series Mustang, and I'm sure you guys all remember it. They're angled in changing diameter as they move up the car, while every other stripe out there is straight. The tapered stripe works a different line of the car and it gives a look that's unlike the look that a parallel stripe gives. MMD offers these in a few different colors. They have black, matte black, silver, white and, of course, that red that we're all familiar with. One thing I do want to point out is that while the V Series car doesn't have the stripes continue down the front and rear bumpers, the kit does come with some extra material, so you can extend those stripes down if you want to. The install is not hard, but it is time consuming, and it will probably take four to five hours just because you have to take your time and make sure these are straight, even, and laying flat. And there is a little bit of prep work since you should make sure your car is clean before you stick these on there. And I'd recommend measuring and using painter's tape for placement marking just like the directions say. So, overall, I'm going to say this is a one wrench out of three on the meter. Wrapping things up here, the MMD V Series Stripes really work to accentuate the lines of the S550 Mustang, and if you're looking to work those lines, then these stripes are something to consider. There are a few different color options, and you have some extra material to hit those bumpers if you want. You can check them out more online, here at AmericanMuscle.com.

    MMD V Series Stripes. Now you can add the same exact stripes that were featured on Modern Muscle Design's V Series SEMA car to your very own 2015-2019 Mustang. These are not your typical parallel Lemans stripes, these stripes are tapered to accentuate the clean sculpted lines of your S550 Mustangs body.

    Wrapping Cast Vinyl. Modern Muscle Design's high quality 4 mil Wrapping Cast Vinyl features a built-in protective clear coat layer that is engineered to last at least 8 years of harsh outdoor use. Making it far more durable than the competitors cheap, calendared vinyl film which starts to degrade in just a couple of years!

    Air Release Technology. Air release technology features miniature air channels on the adhesive side of the vinyl that allows air to easily be squeezed out from under for a bubble-free installation and a smooth wrinkle-free surface.

    Application. These Silver MMD V Series Stripes are designed to fit all 2015-2019 Mustangs including the V6, Eco-Boost and GT models.

    Fitment: 2015 2016 2017 2018 2019 Details

    CA Residents: Warning: California's Proposition 65

    What's in the Box
    • (1) Hood Stripe
    • (1) Roof Stripe
    • (1) Trunk Stripe
    • (1) Instructions
    • (1) Squeege
    Installation Info
    Tech Specs
    Will it fit my Mustang?

    You Might Also Like

    Customer Photos (12) Submit Your Photo

    View All 12 Photos

    Questions & Answers (7)

    5 Top Rated Questions

    What is the width of each stripe at the widest part? My 2018 GT came with good vents, just want to make sure those won’t get in the way of the stripes. Thanks!

    • The Red MMD V-Series Stripes will be 3" wide at the front, and will extend to 9.5" wide at the rear of the hood.

    Helpful (0)

    Items included list (1) Hood stripe, (1) Roof Stripe, etc. Is the dual stripe integral with each other or are their actual 2 separate stripes. Price includes both stripes.

    • One set of the Silver MMD V-Series Stripes will come with both stripes, and enough material to complete installation on one car.

    Helpful (0)

    Is there enough material to stripe down the rest of the front bumper

    • There certainly is, we leave more than enough slack with our stripes to make sure you have plenty to cover everything needed on your Mustang.

    Helpful (0)

    What company manufactures the vinyl that you use?

    • The vinyl that we use is made in house.

    Helpful (0)

    Is it easy to remove these stripes later if I want? If yes, do they leave any marks if they stay on for couple of years (assuming that they were installed properly)?

    • It is definitely easy to remove. All you need his a hair dryer and a little bit of time. Allowing that hair dryer to warm up the adhesive should allow you to safely peel that stripe off, leaving the paint underneath unharmed. The only visual issue you may see is how sun-bleached the paint on your car is compared to what was previously covered underneath the stripe.

    Helpful (0)
    Post Your Question
    2 More Questions
    any examples of what silver v series would look like of oxford white? 1 answer
    If I decide that this is not the look I wanted after all, how difficult is it to remove these stripes? Ken 1 answer

    People Who Bought This Item Also Bought

    Customer Reviews (24) Write a Review

    Overall Rating 4.5

    out of 5 stars

    Installation Time:Full Day

    Installation Cost:$100-$250

    • Fit 4.5 4.5
    • Appearance 4.708333 4.7
    • Bang For Your Buck 4.458333 4.5



    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      September 18, 2018

      Love my V-series kit

      Had it professionally installed and looks great. Came with entire length of car but i stopped at hood and trunk. Good value, just double the price for installation.

      IsaacM

      Year: 2016 Submodel: GT

      Helpful (0)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: 0-$100

      June 06, 2018

      Review from White MMD V-Series Stripes (15-19 All)

      RALLY STRIPS

      GREAT FIT, RESONABLE COST, INSTALL WAS $100 TOOK ABOUT 3 HOURS

      AdamJ

      Year: 2018 Submodel: EcoBoost

      Helpful (3)

    • 5/5

      Installation Time: Afternoon

      May 16, 2018

      Great Look

      I ordered this stripe kit not really knowing if I'd like it and thinking I may wait a while to install. Upon unpacking the vinyl stripes I could see that they were good quality material. The shape of the stripes is a good change from the straight GT500 stripes that EVERYONE has. The contour of the stripes in this kit accentuates the lines in the hood. Even though I've never installed any vinyl before, I decided to give this a shot. Process is pretty straightforward with the vinyl install kit. Just use plenty of spray and take your time. If you get any large pockets of air or water under the vinyl try to work it easily to the edge of the vinyl and then out. If you are unable to get it to the edge DO NOT FORCE IT. You will end up with a tight wrinkle in your vinyl that will be very hard to remove. If you have a stubborn bubble, you can either pull a small portion of the vinyl up from the surface of the car to release the bubble or you can use a needle to put a small hole in the bubble and squeegee the bubble out of the hole. Remember, a hair dryer or heat gun is your friend, especially with a curved or uneven surface where the vinyl needs a little finesse. Again, just be patient and don't get frustrated and you will have good results. As I said, this is my first time working with vinyl and with the exception of a couple of small mistakes I had awesome results.

      JeremyW

      Year: 2016 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      May 01, 2018

      Review from White MMD V-Series Stripes (15-19 All)

      Add a lot!

      Glad I had someone else tackle this. Less stress and swearing. Look great and are thicker material which is what you want.

      MelodyT

      Year: 2017 Submodel: EcoBoost

      Helpful (3)

    • 5/5

      Installation Time: Afternoon

      April 03, 2018

      V Stripe

      Easy to install. Really looks great. Totally changed the look of my Stang. Great kit.

      StevieGT

      Year: 2015 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $250-$500

      March 12, 2018

      Review from Red MMD V-Series Stripes (15-19 All)

      Awesome looking car

      I have the metallic metal color and it makes the pop! I get looks, thumbs up and waves every time I take it out.

      GeorgeK

      Year: 2017 Submodel: GT

      Helpful (3)

    • 2/5

      Installation Time: Afternoon

      October 22, 2017

      Review from Red MMD V-Series Stripes (15-19 All)

      Could be better

      The stripes are not the color I thought I would get, they are a light red. They did not stick well and don't like how the stripes are different widths. I think they were old stock. I don't recommend these stripes, over priced and not good quality. $10 worth of vinyl for $129.

      gforce9

      Year: 2017 Submodel: GT

      Helpful (3)

    • 1/5

      Installation Time: Full Day

      October 17, 2017

      Review from White MMD V-Series Stripes (15-19 All)

      Exterior Striping

      The stripping was just what I expected easy to install and really have rave review everybody see them people I thought never noticed

      Orange

      Year: 2016 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      June 29, 2017

      Review from Red MMD V-Series Stripes (15-19 All)

      Looks amazing!

      Looks amzing! Only took about an hour to put on and im loving it

      DanielV

      Year: 2017 Submodel: V6

      Helpful (3)

    • 5/5

      Installation Time: Afternoon

      June 13, 2017

      Review from White MMD V-Series Stripes (15-19 All)

      Mustang white strips

      My Mustang looks Fantastic with the white strips . Much cheaper to buy parts direct from the US , great service . fantastic range of Parts

      TaraH

      Year: 2017 Submodel: EcoBoost

      Helpful (3)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      March 23, 2017

      Review from Red MMD V-Series Stripes (15-19 All)

      beautiful!

      very nice material american muscle.com. vinyl is already pre cut. professionally installed and took 6hr for the whole process.

      vern

      Year: 2016 Submodel: GT

      Helpful (3)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      December 09, 2016

      Review from Red MMD V-Series Stripes (15-19 All)

      Awesome

      Looks great on my shadow black mustang. Highly recommended!

      thunderhorse

      Year: 2016 Submodel: Ecoboost

      Helpful (4)

    • 5/5

      Installation Time: Full Day

      November 30, 2016

      Ease of installation

      I found the product to be of high quality. Highly suggest 2 people to lay long (hood and top) pieces. The vinal doesn't slide on the wetted surface very easily which causes it to stick to the car. Use plenty of water which helps it to slide. Heat gun came in very handy on areas to be stretched or shrunk. Good luck

      JJ

      Year: 2016 Submodel: Ecoboost

      Helpful (4)

    • 5/5

      Installation Time: Afternoon

      October 25, 2016

      Review from Red MMD V-Series Stripes (15-19 All)

      Stands out

      It pops out and adds a custom sweet look to the car I recommend getting this If you have a black or white car!!!

      Chasegt96

      Year: 2015 Submodel: GT

      Helpful (5)

    • 3/5

      Installation Time: Afternoon

      June 17, 2016

      Review from White MMD V-Series Stripes (15-19 All)

      White mmd v series stripes

      Looks great on the car especially with a blue car the contrast is exactly what I was looking for

      Okin7

      Year: 2016 Submodel: Ecoboost

      Helpful (4)

    • 5/5

      Installation Time: Full Day

      June 12, 2016

      Review from White MMD V-Series Stripes (15-19 All)

      If you are not sure get it done professionally!

      If you are not a professional window tinting and graphic tech. Don't try it your self. Go to the pros and have pay the extra money to save you the headaches. Mine turn out great and I even added a extra pimp strip on both sides to get a different look.

      Iceman

      Year: 2015 Submodel: V6

      Helpful (5)

    • 5/5

      Installation Time: Less than 1 Hour

      June 09, 2016

      Review from Red MMD V-Series Stripes (15-19 All)

      V series stripes

      This item it's really nice and easy to install it as well, I recommend everyone to purchase it

      zezo

      Year: 2016 Submodel: GT

      Helpful (4)

    • 5/5

      Installation Time: Afternoon

      April 29, 2016

      Review from White MMD V-Series Stripes (15-19 All)

      Quality

      Installation is super simple just need to be careful and take your time lining everything up. Very affordable upgrade considering how much it changes the look of the car. Thanks AM!

      AdamMD09

      Year: 2015 Submodel: V6

      Helpful (5)

    • 5/5

      Installation Time: Afternoon

      October 05, 2015

      Review from White MMD V-Series Stripes (15-19 All)

      V racing stripes

      Changed the entire look of the car! Exactly what I was hoping for. Did the job myself without any major conflicts. These baby's are bright!! Love'em. I added side rocker stripes to compliment the racing stripes. Anyone can do this job, save yourself a couple hundred dollars and go for it.

      Stangboss2014

      Year: 2015 Submodel: GT East Texas

      Helpful (4)

    • 5/5

      Installation Time: Afternoon

      September 24, 2015

      Awesome results

      Changed plain paint job into a more sports car look of the older GT mustangs .Love the look and it sets my car part from all of the other generic looks muscle cars on the street.Great product and finish is awesome.

      Bert56

      Year: 2015 Submodel: GT Phoenix

      Helpful (4)