Ford 8.80-Inch C-Clip Axles; 31-Spline (05-10 Mustang GT, GT500; 11-14 Mustang)Find parts that fit my vehicle

Alloy axle packages are optimized for street & track use See our Hy-Tuf axles for maximum torsional strength for all out Drag RacingFits factory width 2005-2014 Mustang with 8.8 rear and OEM housing ends– Updated material and machining technology to replace old and fatigued OEM axles – Replaces axles damaged by bearing failure – Reduces end play caused by worn clip grooves – Perfect addition to a rebuilt rear end– Forged from modified 1550 premium steel – Majority of machining performed before heat treat to provide consistent hardness – Induction hardened to Rc 62 to increase torsional strength while remaining ductile – Finish machined after heat treat to ensure accuracy – 31 spline – 31.82″ & 32.71″ in length (Measured from outside face of flange to axle tip) – Dual 4 1/2″ bolt circles for either OEM 1/2″ press-in studs or 1/2″-20 screw-in studs – Designed to accept OEM reluctor rings, replacement bearings, seals, and clips – Forged in the USA – Designed and machined by Strange EngineeringOEM reluctor ring……………… See A1098I 1/2″-20 x 2″ screw-in studs… See A1025 1/2″-20 x 3″ screw-in studs… See A1026Screw-in studs are measured from underneath the hex of the stud to the tip

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov