Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

MMD Headlight Splitters - Pre-painted (10-12 GT)

Item 41179
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $129.99 You Save 23% ($30.00)
Our Price

$99.99

FREE Shipping

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Choose options to add to cart.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Videos & Details

    • Matches 2010-2012 Factory Mustang Colors
    • Painted Right Here at AmericanMuscle!
    • Aggressive GT-R Styling
    • Durable Automotive Grade ABS
    • Sold as a Set of Two Splitters
    • Fits 2010-2012 GT Mustangs

    Review & Installation Video

    Hey what’s up everyone? I’m Justin with AmericanMuscle.com and I’m checking out these GTR inspired pre-painted headlight splitters for all 2010 and up mustang GTs. MMD has come through yet again with this product and other unique parts which aim to help your mustang stand apart from the crowd. These splitters draw their inspiration from the road race concept mustang GTR which besides its killer performance is equipped with some real cutting edge styling parts, these splitters being one of them. These splitters are constructed from ultra-durable ABS plastic and then are painted right here at AmericanMuscle headquarters in a state of the art paint booth using the same paint and clear coat ford uses on their mustangs. Installation is a breeze thanks to the very detailed instructions and everything that’s included in the kit. Your first step is to prep the back of your splitter using the 3M adhesion promoter, once you have that done go ahead and apply your 3M automotive tape which has already been cut for you. After you have got that, go ahead and move over to your headlight, clean the area on your headlight using the supplied alcohol wipes, align the splitter to the alignment dot that’s right in the middle of your headlight, adhere firmly and that’s it. It shouldn’t take you any more than 30 minutes. So if you want to invoke some rare Saleen concept car styling’s on your coyote mustang then you’ll definitely want to check out these pre-painted MMD headlight splitters.

    Aggressive GT-R styling. The GT-R was a Concept Race Mustang that packed both power and styling and now you can have the look of its iconic headlight splitters for your very own Pony. These MMD GT-R style Mustang headlight splitters are not only made of durable ABS for a long life, but are available pre-painted to match your Mustangs factory color straight out of the box!

    Painted Here to Match 2010-2012 Factory Mustang Colors. These Modern Muscle Design Mustang Headlight Splitters are painted right here, at AmericanMuscle HQ, to match your stock Ford Mustang colors exactly. They will give your Pony a sleek, sexy appearance that will make it stand out from the rest of the herd.

    Durable Material.
    Constructed of a durable injection molded ABS plastic, these MMD Mustang headlight splitters are painted with the same base coat and clear coat urethane paint Ford uses on the exterior of your Mustang for a perfect color match.

    Simple Install. No messy glue or drilling is required for installation. This set of two Modern Muscle Design Mustang headlight splitters are designed to install simply with the supplied 3M doubled sided automotive bonding tape for a quick and easy installation.

    Application.
    These GT-R style MMD Mustang headlight splitters are designed to be a perfect fit on any 2010-2012 GT Mustang and are sold as a set of two, one driver side and one passenger side. Does not fit V6, Shelby GT500 or Mustangs equipped with the GT/CS grille Surround.

    Find Your Paint Code

    • Choose the year of your Mustang from the options above. The color choices displayed will be the only exterior paint colors available for your year Mustang. The first two letters for each color option are the paint code for your exterior color.

    • If you need to verify your paint code, look inside the door jam of your driver's side door at your VIN plate to find your exterior paint code.

    These headlight splitters are also available Unpainted for those who like to do-it-yourself.

    Fitment: 2010 2011 2012 Details

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (2) Headlight Splitters
      Hardware included:
    • None Required
    Installation Info
    Tech Specs
    Will it fit my Mustang?
    • Boss 302 - 12
    • GT - 10, 11, 12

    Not compatible with the GT/CS Grille Surround.

      Customer Photos (53) Submit Your Photo

      View All 53 Photos

        Questions & Answers (22)

        5 Top Rated Questions

        Will these splitters able to be used over smoked covers?

        • The MMD Headlight Splitters can be installed on your headlights equipped with the smoked covers. However, they will need to be installed on top of the headlight covers.

        Helpful (1)

        I have 2 questions: 1- If i install these headlights splitters, and if i need to remove the front bumper for some reason (say repairs), can the front bumper be removed without damaging the splitters or the pumper? 2- Okay so i know these won't work on a V6, but why exactly?

        • These headlight splitters would allow you to remove the bumper no problem! As far as the fitment these splitters are designed to work on the GT front ends only. The V6 models will have a slightly different front end.

        Helpful (1)

        I’ve noticed in one of the customer photos it looks as though they have placed these on a v6? Is it possible to get them to fit correctly in a 2012 v6

        • Unfortunately they will not fit the V6 models.

        Helpful (0)

        I managed to place the grill side of the drivers side splitter 1/4 inch low. Do you have replacement 3M tape available?

        • At this time we do not have replacement tape available separately, however 3M automotive grade tape is available at most auto parts stores.

        Helpful (0)

        Will these fit on a 2012 GT/CS?

        • This will not fit V6, Shelby GT500 or Mustangs equipped with the GT/CS grille Surround.

        Helpful (0)
        10 More Questions
        Will these fit the 2011 v6? 1 answer
        Will these splitters work on a 12 gt with the Saleen s281 grille. 1 answer
        Will these or any other splitters fit 2011-12 gt500? 1 answer
        Might be a dumb question but will this fit on a 2012 Mustang V6? 1 answer
        How do you know where to align the splitters on the raxiom headlights? Do they line up with the lines on the saleen grille? 1 answer
        MMD Headlight Splitters (Unpainted) When unpainted, is the color black matte? 1 answer
        with the headlight splitter installed, what happens to the light projected by the headlight @ night? 3 answers
        Will These Splitters take away from the light using Raxiom's Halo Headlights? 1 answer
        Saleen grille? Will this fit on a 2011 GT with a saleen grille? 1 answer
        Will these work correctly with projector headlights? My roommate swears that headlight splitters aren't good for a projector headlight because it is technically like putting a pencil in front of a projector or overhead at school. He said it blocks too much light. 2 answers

          Customer Reviews (41) Write a Review

          Overall Rating 4.1

          out of 5 stars

          Installation Time:Less than 1 Hour

          • Color Match 5 5
          • Fit & Finish 4.571429 4.6
          • Appearance 4.933333 4.9
          • Bang For Your Buck 4.333333 4.3
          • Fit 4.666667 4.7



          • 5/5

            Installation Time: Less than 1 Hour

            April 23, 2019

            Headlight splitters

            I have a silver car with the GT black grill surround so I was debating sliver or black splitters. I decided on the sliver ones and they look great. If you take your time and line them up on the headlights they'll look great. The only problem I had was the double sided tape, the tape with the splitters wouldn't adhere to the headlight. So I used some 3M double síded automotive tape I had it worked, so be prepared to change the tape if needed. Otherwise it was an easy installation. Due to having to redo the tape it took 45 minutes, without the hiccup it would have been a 10 minute job.

            Dean11

            Year: 2011 Submodel: V6

            Helpful (0)

          • 4/5

            Installation Time: Less than 1 Hour

            April 14, 2019

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            Splitter

            I was under the impression and told by a tech that the unpainted was trim black in color, it wasn't. I had to find a match and painted the pieces. one of the pieces had a surface defect that didn't accept paint in the same manner as the rest of the piece. didn't notice till after it was installed. You need to trim the 3m tape to the splitters. once applied its not coming off.

            Bear

            Year: 2010 Submodel: GT

            Helpful (0)

          • 3/5

            April 11, 2019

            Review from MMD Pre-Painted Headlight Splitter - Yellow Blaze (10-12 GT)

            excellent color Match

            Hard to match color was spot on ! Tri Coat Blaze Yellow. The right side piece was not as good a fit as the left. The Left one fit perfect and the Right one was longer. The inset for the wide side edge was not the same too as the other side and did not fit well. I used it anyway because it looks great. Fit ? ,,, Not so good.

            GTPonyGuy

            Helpful (0)

          • 5/5

            February 08, 2019

            Review from MMD Pre-Painted Headlight Splitter - Grabber Blue (10-12 GT)

            Many compliments already

            I was afraid these splitters weren’t going to fit my my v6. But i made them work, they fit perfectly. I’ve gotten so many compliments on my car since I added these bad boys on!

            Murphy

            Helpful (0)

          • 5/5

            December 30, 2018

            Review from MMD Pre-Painted Headlight Splitter - Performance White (10-12 GT)

            Headlight splitter

            Looks great! A nice appearance upgrade, quick and easy installation

            ChrisR

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            December 22, 2018

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            Beautiful

            This item made my mustang more agresive, and beautiful..love it... thanks American muscle

            ArmandoP

            Year: 2010 Submodel: GT

            Helpful (3)

          • 5/5

            June 06, 2018

            Review from MMD Pre-Painted Headlight Splitter - Red Candy Metallic (10-12 GT)

            Awesome Addition

            Delivery was fast and the paint finish on the parts was perfect. Installation was quick and painless, approx 15 minutes start to finish. The finished product looks excellent. Nice aggressive finish to the front end.

            Cruzer

            Year: 2011 Submodel: GT

            Helpful (0)

          • 2/5

            April 24, 2018

            Review from MMD Pre-Painted Headlight Splitter - Kona Blue Metallic (10-12 GT)

            Head light spliter

            I was at 1st impressed with the look but after just a few weeks they both started to loose their grip on my head lights. (And yes I cleaned them both and followed there instructions) I removed them and wasted the cost because not able to reapply.

            Spotrox

            Year: 2011 Submodel: GT

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            February 23, 2018

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            Great item

            My car looks much better with splitter headlights it looks more aggressive A

            JulioC

            Year: 2010 Submodel: GT

            Helpful (11)

          • 5/5

            Installation Time: Less than 1 Hour

            November 05, 2017

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            MMD Splitters

            Quick and easy! Didn't take me that long to install.

            JalenF

            Year: 2011 Submodel: V6

            Helpful (12)

          • 5/5

            Installation Time: Less than 1 Hour

            August 10, 2017

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            Awesome

            It totally sets off my sets love it . Super fast delivery always happy with American Muscle

            MIlissaS

            Year: 2012 Submodel: GT

            Helpful (11)

          • 4/5

            Installation Time: Less than 1 Hour

            July 07, 2017

            Headlight splitters

            The only complaint was the two sided tape ,was an inch short and didn't fit on splitters any which way , had to cut tape into pieces and trim a lot. Paint was perfect and makes front look more aggressive .

            Mat

            Year: 2010 Submodel: GT

            Helpful (10)

          • 5/5

            Installation Time: Less than 1 Hour

            June 09, 2017

            Headlight Splitters

            Gotta admit, they'll give your mustang the look you're looking for. Even more for the ones keeping the original headlights!!

            BrooksH

            Year: 2012 Submodel: GT

            Helpful (11)

          • 4/5

            Installation Time: Less than 1 Hour

            June 07, 2017

            Headlight Splitters - Pre-painted

            The splitters are great and look amazing and easy to install but, one is a litter shorter in than the other. The color match was spot on.

            Mobwolf

            Year: 2011 Submodel: GT

            Helpful (13)

          • 5/5

            Installation Time: Less than 1 Hour

            May 22, 2017

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            These splitters are a great look

            Follow instructions on where to mount the splitters. Do a dry run to see how it goes in place. Only problem with fit it about 1 1/2 inches isn't sticking to the lens centers. Yes, I used alcohol and enhancer. Drove 80-85mph to show at new ACE Cafe Orlando. Still on when I got there and when I got home. I like these splitters very much. Roughed them up with 1200 wet sand paper. Sprayed on a paint adhesive followed by 3 coats of satin black paint for plastic and I was good to go. Wish they came with holes drilled and plugged with clear plastic dowels so lights can shine thru. As I stated in my photos, stealthy and cool looking not just another add-on. As you can see in my photos it's a Roush Stage 3.

            BobF

            Year: 2010 Submodel: GT

            Helpful (10)

          • 4/5

            Installation Time: Less than 1 Hour

            May 20, 2017

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            Aggressive look!

            Great product! Doesn't fit a v6 without modifying it but love the look of it

            IvanP

            Year: 2010 Submodel: V6

            Helpful (11)

          • 5/5

            April 26, 2017

            Review from MMD Pre-Painted Headlight Splitter - Red Candy Metallic (10-12 GT)

            Gary S

            Great fit, perfect color match and a easy install. Rear side vents next!

            GaryS

            Helpful (0)

          • 4/5

            April 03, 2017

            Review from MMD Pre-Painted Headlight Splitter - Red Candy Metallic (10-12 GT)

            Headlight Splitter - Red Candy Metallic 2011 GT

            Easy install in minutes, looks more aggressive,, you do not see many Mustang gt with these Splitters. The paint match was spot on thank you.

            Mobwolf

            Helpful (0)

          • 3/5

            Installation Time: Afternoon

            February 19, 2017

            HEADLIGHT SPLITTERS

            ....EASY TO INSTALL... GREAT COLOR MATCH ....A LITTLE PRICEY

            RICHARDL

            Year: 2012 Submodel: GT

            Helpful (11)

          • 5/5

            Installation Time: Less than 1 Hour

            November 14, 2016

            Review from MMD Headlight Splitters - Unpainted (10-12 GT)

            Unique Detail

            I like to install a few unique items that set my car apart from the factory "cookie cutter" norm. Isn't that why we all shop for aftermarket parts and accessories on americanmuscle.com? The headlight splitter offers that subtle yet unique balance I was looking for. Looks like it could be factory or is it custom? I like that.

            CoyoteKid

            Year: 2011 Submodel: GT

            Helpful (12)

          Related Mustang Categories