Holley Performance Chrome Water Neck (79-95 5.0L, 5.8L)

Customer Reviews (35) Write a Review

Overall Rating 4.1

out of 5 stars

Installation Time:Less than 1 Hour

Installation Cost:0-$100

• Fit 4.458333 4.5
• Appearance 4.25 4.3
• Bang For Your Buck 4 4

• 5/5

  August 04, 2016

  Chrome Neck

  It just makes the whole engine bay pop!!! Looks really good with all my other chrome parts!!!

  1Raw89

  Year: 1989 Submodel: Other

  Helpful (2) Thanks for your input!
• 1/5

  August 01, 2016

  Garbage waterneck

  Waterneck is no good, chrome came off of the first one I bought and it was never installed on the car, just sitting on my workbench. AM sent em another after waiting for a few months and the replacemetn is also starting to show chrome peeling off. the second one also was never installed on the car. just sitting on the workbench and it starts peeling.

  FOXBOD

  Year: 1990 Submodel: GT

  Helpful (2) Thanks for your input!
• 5/5

  Installation Time: Less than 1 Hour

  October 12, 2012

  Great Replacment

  When it came time to replace the thermostat, I decided it would be best to replace the housing rather than fight the corrosion on the original. This thermostat fit perfect, looks great, and an added bonus, has a fitting for adding in an additional sensor, i used this for my auto meter temp gauge, but it could also be used for a fan controller.

  Robert

  Year: 1986 Submodel: Other Downingtown, PA

  Helpful (2) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  January 11, 2012

  Looks great, hose fitment issue.

  I bought this new water neck because I was changing the thermostat and wanted a little bling. It looks great, the only issue is the stock bypass hose is too big for the inlet. I bought the Ford Motorcraft By-Pass Radiator Hose (79-93 5.0L) but the inlet on the neck is smaller than stock. Wish I would have known that before I wasted 10 bucks on this hose from American Muscle.

  NewSchool

  Year: 1985 Submodel: GT Dallas, TX

  Helpful (2) Thanks for your input!

  • Fit 3

    3

  • Appearance 5

    5

  • Bang for your Buck 3

    3
• 5/5

  June 15, 2011

  chrome water neck

  i noticed my water neck was all rusty and ugly when i was changing my water pump and hoses. i tried to combine it with AM's mishimoto racing thermostat. However the shop that i took my car to said that it didnt fit with neither the stock nor chrome waterneck so i bought a stock thermostat from autozone. anyway the waterneck is awesome and looks great!

  m gonzalez

  Year: 1988 Submodel: Other

  Helpful (2) Thanks for your input!
• 5/5

  November 30, 2009

  chrome water neck

  Very nice looking

  Jay powell

  Helpful (2) Thanks for your input!
• 5/5

  Installation Time: Less than 1 Hour

  April 24, 2017

  Chrome water neck.

  Price was right. Delivery was quick. Installation was OK. Looks great.

  DAVE

  Year: 1995 Submodel: GT

  Helpful (1) Thanks for your input!

  • Fit 5

    5

  • Appearance 4

    4

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Afternoon

  October 18, 2016

  Excellent finish, poor details

  Excellent finish on sealing surfaces, the chrome looks great under the hood. The parts fit together great and a simple install; however, this would have been a 5 star rating, but what should've been a 1 hour install turned into a 3, when I found out the the new water neck uses a different bypass hose configuration and had to go back to the parts store. Product specifications and install guide failed to mention this important detail.

  Obenator

  Year: 1986 Submodel: GT

  Helpful (1) Thanks for your input!

  • Fit 1

    1

  • Appearance 5

    5

  • Bang for your Buck 4

    4
• 3/5

  September 20, 2016

  SO FAR SO GOOD

  This looks very good, there is 2 issues I have .#1 the ad never said this was a Mr Gasket product,I had read some bad reviews on another site about there water neck and would not have chanced buying this if it was stated in the ad that it was a Mr Gasket product.#2 this is billed as fitting a 75-95 302, that is not true the bypass hose on mid 85 and up has a 5/8 end on the water neck side not 1/2 like the earlier years I already had the 5/8 style hose so I had to get a new 1/2 style I haven't put antifreeze in it yet so we will see if the reviews are true or not .

  Jay

  Year: 1987 Submodel: Other

  Helpful (1) Thanks for your input!
• 5/5

  Installation Time: Less than 1 Hour

  September 24, 2015

  Works and looks great!

  My old water neck was leaking so I decided to get this chrome one to replace it . Put it on it fit perfectly and looks nice under the hood no more leak! Great product

  smokeu2

  Year: 1994 Submodel: GT Macedonia, OH

  Helpful (1) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  April 13, 2014

  accents beautifully with blue !

  this is eye catching! awesome!!!!!!!!! great,i like it.

  pony95

  Year: 1995 Submodel: GT Boston, MA, USA

  Helpful (1) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  January 04, 2012

  Chrome water neck - thermostat housing.

  Great looking and great quality. I would highly recomend this to anyone needing a new water neck.

  Cobraclone67

  Year: Pre-79 Submodel: Cobra Phoenix, AZ

  Helpful (1) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Less than 1 Hour

  December 11, 2011

  Nice piece

  I was hoping to find this part in a satin finish, but this had to do. I opted for the "direct-fluid style" sensor for my electric fan digital controller and needed the added port. This item fit the bill and worked well. One small complaint - while all the fittings I used were correct, the amount of threads anything would go in (the included plug as well) were much less that one would hope for. It seemed like it should screw in much deeper, but so far no leaks (with Teflon tape used). On my car I would have played heck trying to use the supplied hex-head bolts, but nice they included them. I reused the originals. If you need one, this sure is nice otherwise. The chrome seems very solid and the part is weighty and feels very, very solid.

  Ninety3Coupe

  Year: 1993 Submodel: Other Anaheim, Ca.

  Helpful (1) Thanks for your input!

  • Fit 4

    4

  • Appearance 4

    4

  • Bang for your Buck 4

    4
• 5/5

  July 18, 2011

  79/95 chrome water neck 5.0L

  good fit, no leak,very nice to watch on my engine bay,solved my problem of leak.Thank you AM

  Andre Gauthier

  Year: 1988 Submodel: GT

  Helpful (1) Thanks for your input!
• 5/5

  July 30, 2010

  NICE CHROME

  PRODUCT IS VERY COOL BUT I HAD TROUBLE TIGHTENING THE BOLTS. WHAT SIZE ALLEN WRENCH IS USED.I TRIED THEM ALL.

  SERGIO

  Helpful (1) Thanks for your input!
• 5/5

  December 17, 2009

  water neck

  Awesome price & product. looks great.

  mark darnell

  Helpful (1) Thanks for your input!
• 1/5

  August 10, 2017

  Junk

  Says holley performance? ?? Its from mr gasket and its made in china. .. Could have gotn it cheaper in town. No good

  Rich

  Year: 1989 Submodel: GT

  Helpful (0) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 1

    1
• 1/5

  Installation Time: Less than 1 Hour

  July 01, 2017

  Chrome Water Neck

  The chrome fell off in less than a month. This is the only product I have purchased from American Muscle that was junk.

  tjenkho50

  Year: 1995 Submodel: GT

  Helpful (0) Thanks for your input!

  • Fit 5

    5

  • Appearance 1

    1

  • Bang for your Buck 1

    1
• 4/5

  Installation Time: Less than 1 Hour

  April 20, 2017

  Holly water neck

  The water neck looks really good.nice quality quick and easy to install all in all really happy with the part

  BrianH

  Year: 1989 Submodel: GT

  Helpful (0) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Shop Install

  Installation Cost: 0-$100

  February 08, 2017

  Great rebuild 92 Mustang.

  My mechanic said it would have been nice have a seat built in it to keep it in place. Looks good know to get the chrome pipe hooked up in real happy.

  joe

  Year: 1992 Submodel: GT

  Helpful (0) Thanks for your input!

  • Fit 4

    4

  • Appearance 4

    4

  • Bang for your Buck 5

    5