(approx) 20 Minutes
Simple installation for anyone.
$149.00 (each)FREE Shipping
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 20, 2020
The mounting hardware that was provided was top quality and should help tremendously in providing years of installation and remove of the screen. The screen material appears to be durable and time will tell. The fit is good and is a good look on the car.Helpful (0)
November 18, 2019
Good for one drive
Its really nice looking and a tight fit. Easy to install. After doing one cruise has a hole puncture from a rock I believe. Material is very weak. Might be worth spending alittle money for something stronger. Material looks to wanna unwound from the hole area.Helpful (1)
September 25, 2019
It’s really good but fragile, make sure not to scrape your Cochin spoiler or a curb with this on obviously but other than that easy install ectHelpful (1)
September 18, 2019
Easy to Live With
This cover is easy to install and take off. When it is off it doesn't take up much room amd it seems to be doung the job of protecting the front of my car. And gets alot of attention!Helpful (1)
September 17, 2019
This was easy to install and fits perfectly. It protects the front end nicely and I think it looks nice. Material is stretchy and perforated. I keep it in my truck and if I’m going to be driving on the highway, I quickly put it on.Helpful (1)
September 01, 2019
Very Cheap Material! X
I have had this item for about 2 months now, as soon as the first rain came it started to expand to the point it is touching the floor already. There are some areas that are tearing apart as well. I wouldn't recommend this product to anybody. Maybe if you want to put it on to go to a car show and take it off as soon as it is done. But who will wear a bugs mask for a car show? -or at least that is why I needed this mask for. I will post pictures if you would like to see them. Have a nice day!Helpful (2)
June 26, 2019
This mask is perfect for road trips where debris can damage your paint. Works as advertised!Helpful (0)
June 10, 2019
This is a must have for sure, when traveling and you don't want to mess the front end of your car up.Helpful (0)
May 29, 2019
Awesome for road trips! The debris just shakes out. Very easy to install. The only issue is with a Roush front fascia, you have to modify the center snap due to the brake cooling duct. I used a small plastic wall anchor. This also creates a challenge getting it snapped on. Still a great product and I highly recommend it.Helpful (0)
May 28, 2019
This is an awesome car bra. I love it. Easy to install and stays put through the wind, rain and car wash! And looks fabulous!Helpful (0)
Would it stretch over the standard license plate bracket, or would that compromise the performance of the mask? Also, if mounting a license plate on top of mask after install would the screw holes for the plate weaken the integrity of the material?
Will this be tough enough to protect the covered area from small rocks/stones/flying debris? How much air restriction will it cause to the intake?
This will offer some good protection from road debris.
Will this fit on 2019 Mustang GT with Performance Package 1?
Yes this will fit 2019 GT models with the Performance Package 1.
Does it fit a 2018 mustang ecoboost?
This will not work on the EcoBoost models.
Will this fit a 2018 Mustang Roush stage 2?
Yes, it will fit a 2018 Mustang Roush Stage 2.
We have found that the easiest way is to pop this off, wash it in the tub or a sink, and hang dry it. We would not suggest the washing machine, as that can wear the fabric down.
This front end mask will fit all 15-19 Mustang GT/V6 models.
The NoviStretch Hi-Flow Front End Mask is designed for use with all 2015-2019 GT and V6 Mustangs.
The Novistretch Hi-Flow Front End Mask will fit the 2016 GT/CS.
Unfortunately this front end mask is not compatible with the GT350 bumper.
This front end mask will fit all 15-18 GT models.
The front license plate would not be visible with the Novistretch Hi-Flow Front End Mask installed. I do not see a model that they offer that would make a front plate visible.
The Novistretch Hi-Flow Front End Mask is designed to fit the standard Mustang Fascia. It may not stretch properly over the Roush Stage 2.
This will not fit on the EcoBoost models because the front end of this mask was designed specifically for the length of the GT and V6's. The EcoBoosts have shorter splitters which will cause the mask to slack if not installed on the correct model Mustang.
The Novistretch Hi-Flow Front End Mask will technically fit on the bumper, however, this would provide an obstruction to the intercooler. If the intercooler heat soaks due to the lack of air-flow it could result in extremely high intake air temperatures. For this reason, we would not recommend this mask for an Ecoboost Mustang.
(approx) 20 Minutes
Simple installation for anyone.
What's in the Box