Win A 2018 RTR Spec 3 Mustang Enter Now!
Talk to a Mustang Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

SpeedForm Radiator Center and Extension Cover Kit - Pre-painted (05-09 GT, V6)

AmericanMuscle no longer carries the SpeedForm Radiator Center and Extension Cover Kit - Pre-painted (05-09 GT, V6). Please check out Ford Mustang Radiator Covers for an updated selection.
This item currently can not be added to your cart. Please try again later.
Item is Currently Out of Stock Notify Me Choose options to add to cart

Features, Video & Details

  • Matches 2005-2009 Factory Mustang Colors
  • Painted Right Here at AmericanMuscle!
  • Impressive Under Hood Styling
  • High Impact Plastic Material
  • Three Piece Kit
  • Fits 2005 to 2009 V6 and GT Mustangs

Review & Installation Video

Review & Install Video

Hey I’m Justin with, and I’m checking out the pre-painted radiator cover and radiator cover extensions fitting the engine bay on the 2005-2009 V6 and GT Mustang. This three piece kit is going to be a great dressup item to the engine bay in any S197 Mustang, sure the factory rad cover does a great job and all, but it doesn’t get you any extra style points whenever you pop the hood. In addition, the lack of the extensions from the factory tends to leave a lot of dead space over the headlight area. This three piece kit takes care of all of that, and as you can see it really enhances the under hood appearance. The kit includes a pre painted OE style radiator cover and the two pre-painted extension covers. All three panels have been molded high impact ABS plastic, so they’re not only going to offer great durability, but they should all fit like an OEM part. In addition, all these parts have been painted right here at AmericanMuscle headquarters, using the same base and clear coat that Ford uses in their factories, so you can expect a perfect color match to your ride, right out of the box. Getting all three panels installed is a real piece of cake and should really take you no more than 30 minutes. You want to start with the center panel first, removing the factory rad cover, the reinstalling the pre painted radiator cover in reverse order using the factory hardware. After that move over to the side covers, remove the factory bolt, then install the extension covers with the supplied 10mm bolts. So if you’re looking to make a dramatic visual improvement under the hood of your S197, then you’ll definitely want to check out this pre painted radiator cover and extension kit available right here at

Impressive Styling. Add some impressive show winning detail to your S197 Mustang's engine bay with a 3 piece Pre-painted SpeedForm Radiator Cover kit that will be sure to wow the judges. This Radiator Cover and extension kit is the ultimate accent to your Mustang's Power Package and is pre-painted to match your Mustangs factory color straight out of the box!

Painted Here to Match 2005-2009 Factory Mustang Colors. The SpeedForm Radiator Cover and side extensions are painted right here, at AmericanMuscle HQ, to match your stock Ford Mustang colors exactly. They will give your Pony a sleek, sexy under hood appearance that will make it stand out from the rest of the herd.

Quality Materials. Molded from a high impact plastic for long life, this SpeedForm radiator cover kit is painted with the same base coat and clear coat urethane paint Ford uses on the exterior of your Mustang for a perfect color match.

Complete Kit. This Pre-painted SpeedForm Mustang Radiator Cover is sold as a three piece kit. Kit includes center radiator cover, one driver side extension and one passenger side extension.

Application. This Three Piece Pre-painted SpeedForm Mustang Radiator Cover kit is designed to be a perfect fit on any 2005 to 2009 GT or V6 Mustang, does not fit Bullitt or Shelby GT500 models.

Find Your Paint Code

  • Choose the year of your Mustang from the options above. The color choices displayed will be the only exterior paint colors available for your year Mustang. The first two letters for each color option are the paint code for your exterior color.

  • If you need to verify your paint code, look inside the door jam of your driver's side door at your VIN plate to find your exterior paint code.
What's in the Box
  • (1) center radiator cover
  • (1) driver side extension
  • (1) passenger side extension
Installation Info

Most Helpful Reviews

Looks nice but doesn't fit well

The overall look is good but the extinctions don’t fit well. They only have one screw to hold them and they do not lay quite right unless you add a second screw that they are not made for. They stick out ...

Read More
Helpful (6)

Fit and finish

The fit and finish was perfect. Not only did it match the paint perfectly it fit just as well. It really finished off that ugly place under the hood

Helpful (3)

Overall Rating 4.1 out of 5 stars
Read All 14 Reviews

Customer Photos (9) Submit Your Photo

View All 9 Photos

You Might Also Like

3 Questions / 4 Answers

Ask a Question

rad cover with extensions Hi there, I own a 2008 GT Coupe. I have Scott Drake hood pins and I'm wondering if the rad cover with extension will still fit?


  • They should...just unbolt the actual pin that goes through the hood and mark where it will hit the extension and drill through it.


Show 1 more answer Helpful (1)

Does this come with the hood prop delete insert painted also?


  • The Radiator Center and Extension Cover Kit - Pre-painted (05-09 GT, V6) will come with the hood prop delete insert painted as well. As you can see from the item's Customer Submitted Pictures, each one of the deletes has been painted the same color as the customer's car.


Helpful (0)

Will this product fit a 2006 Saleen SC?


  • No.. This will not fit your car. American Muscle has the best when it comes to the right part to fit your car.. Take your time put your year and type of Mustang you have in and they have the product you need and want.


Helpful (0)

More Products You Might Like

Customer Reviews (14) Write a Review

Overall Rating 4.1

out of 5 stars

Installation Time:Less than 1 Hour

  • Fit 3.714286 3.7
  • Appearance 4.785714 4.8
  • Bang For Your Buck 3.785714 3.8

  • 2/5

    Installation Time: Less than 1 Hour

    November 17, 2011

    Looks nice but doesn't fit well

    The overall look is good but the extinctions don’t fit well. They only have one screw to hold them and they do not lay quite right unless you add a second screw that they are not made for. They stick out near the edge of the hood corner and when the hood is closed it hits/rests on the panels which will soon rub off the paint. I bought a pair of these a few years back from another supplier that fit perfect. Unfortunately that supplier is no longer in business.


    Year: 2006 Submodel: GT

    Helpful (6)

  • 5/5

    Installation Time: Less than 1 Hour

    September 15, 2012

    Fit and finish

    The fit and finish was perfect. Not only did it match the paint perfectly it fit just as well. It really finished off that ugly place under the hood


    Year: 2006 Submodel: GT Henniker, NH, USA

    Helpful (3)

  • 5/5

    Installation Time: Afternoon

    May 01, 2013

    radiator cover pieces

    A lot of you said that on the side pieces that there was only on hole. U have two. If you use the dress up bolt kit that they have for under the hood it looks great and then you can align the pieces up.


    Year: 2007 Submodel: Other Collinsville Il

    Helpful (2)

  • 3/5

    Installation Time: Less than 1 Hour

    June 05, 2012

    Looks can be Deceiving

    The overall apperance of the product is great Paint looks great and the radiator cover fits great as well, but the extensions don't fit correctly. It's as if after they were painted then put into a curing oven and heated to dry the paint. In turn they warped the extensions in a manner that the hood strikes both of them and eventually will rub the paint off. Not satisfied with the fitment of the extensions at all. I tried velcro and double sided tape with no success. They just dont fit right. I think A.M. does a great job with most of the products they sell but they may need to look into this product a little more. I hope this review helps.


    Year: 2009 Submodel: GT Ohio

    Helpful (2)

    • Response from AmericanMuscle

      Thanks for the feedback, reviews from our customers are always hepful. I'm glad to hear you were happy with the paint quality. There shouldn't be any issues with the fitment of the extenders. Give one of our customer service reps a call when you get a chance, we'll get another set out to you right away.

      Rob Hunt, Customer Care

  • 4/5

    Installation Time: Less than 1 Hour

    June 26, 2016

    Fantastic Look

    I'm honestly not sure why these are so expensive, but the look is fantastic. I've seen some people have bad experiences with the fit too, but mine went in pretty well. I would have been happier if there were an extra bolt or two to hold down the extensions. They just kinda wobble around being held on by only 1 bolt. The fit isn't what I expected for $300, but it will do the job nicely and the look makes it worth opening your hood for. Install took 10 minutes with a 10mm socket/ratchet on hand.


    Year: 2006 Submodel: GT

    Helpful (1)

  • 3/5

    Installation Time: Less than 1 Hour

    July 10, 2013

    Radiator center cover

    Center panel was a perfect fit. Side panels fit very poorly would not fit flush or sit flat. Needs to have one more bolt down spot. Very disappointed in he side panels only.color is perfect. Really pleased with response from help line.


    Year: 2008 Submodel: Bullitt South San Francisco

    Helpful (1)

  • 4/5

    June 27, 2013

    Finishes engine compartment nicely

    The Finish was excellent,fit was pretty good.i have hood pins so I had to make the holes for them.turned out OK but would be nice if I could have ordered them with holes predrilled.


    Year: 2007 Submodel: Other Canada

    Helpful (1)

  • 5/5

    Installation Time: Less than 1 Hour

    March 15, 2013

    Radiator/Extension Covers really add to looks of the car!

    Very pleased with the Radiator and Extension Cover set that was pre-painted to match my Mustang. Nice paint job!!! The covers look great and were relatively easy to install. Ran into an interference problem with the driver's side extension and the air box on my CAI. Had to trim a notch from the air box for the extension to fit.


    Year: 2008 Submodel: GT Abilene, TX, USA

    Helpful (1)

  • 5/5

    November 23, 2011

    Looks good!

    Part was delivered quickly, fits well and dresses up the area very nicely.


    Year: 2006 Submodel: GT Winnetka, CA

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    July 22, 2015

    Mystery solved!

    You CAN put 2 screws in it, heres how! What you will need- 1 1/4 flat washer, 1" flat washer, 1 3/4 inch bolt, masking tape, flash light. I posted my picture on here showing the two screws (torch red supercharged v6). There is a place to slip your hand behind each headlight. I taped a nut to a 1 1/4 with masking tap and slipped it in place, then simply installed per directions using a 1 2/4 inch bolt. TIP: if you can't get the nut lined up properly, use a flexible magnet. I used all stainless screws, bolts, and washers for a clean finish. Your welcome, mystery solved.


    Year: 2007 Submodel: V6 oak ridge, TN

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    December 05, 2014

    very good fit and the paint Mach my mustang gt

    I like that fit my mustang and the colors Mach but I wish you could invest in a hold radiator cover that b grate .


    Year: 2005 Submodel: GT illinois

    Helpful (0)

  • 5/5

    Installation Time: Less than 1 Hour

    September 11, 2014

    Looks Good

    Well I received my painted radiator cover and extensions in good shape. the paint match was dead on as usual from AM. The only issue I had was that the radiator cover and extensions were setup for the prop rod which is the first thing I got rid of when I picked up the vehicle. A call to AM in my disgust and was ready to return them, I suddenly had a reverse opinion and decide to keep them. Eventually some after Market outfit will produce a one piece painted device that will fit the bill. all in all they still look good and definitely changed the looks of the Dark Candy Apple Red 2008 GT. The second bolt on the end pieces is also a mystery why it wasn't designed into the product.


    Year: 2008 Submodel: GT Paducah, KY

    Helpful (0)

  • 3/5

    Installation Time: Less than 1 Hour

    May 15, 2014

    This is an okay product

    Purchased this for my 09 mustang, and the center cover was very nice, and fit too. The extension I had issues with the paint. Also in the first package that arrived it never came with the screws for the extension parts. American muscle sent out new extensions and those were much better, and they came with the screws. Overall it has changed some of the appearance for the better.


    Year: 2009 Submodel: GT Kansas City, MO, USA

    Helpful (0)

  • 4/5

    Installation Time: Less than 1 Hour

    May 11, 2014

    Nice finishing touch

    The covers look really nice. Finish and packaging from American Muscle was excellent. Agree with some that the fit may be a bit loose and a second bolt would be handy. I don't think it is that big a deal. Once the hood is closed it does not bounce or rattle. I added a little piece of 3M tape to a couple spots and it seems to work fine. I would buy again and recommend.


    Year: 2008 Submodel: GT Illinois, USA

    Helpful (0)

Related Mustang Categories