Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
Mon - Sun, 8:30 AM EST - 11:00 PM EST
Win 1 of 2 $15,000 Mustang Builds! Enter To Win!

QA1 K-Member Brace (94-04 All)

AmericanMuscle no longer carries the QA1 K-Member Brace (94-04 All). Please check out Ford Mustang K-Members, Subframe Connectors, & Braces for an updated selection.
This item currently can not be added to your cart. Please try again later.

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Choose options to add to cart.

AmericanMuscle no longer carries the QA1 K-Member Brace (94-04 All). Please check out Ford Mustang K-Members, Subframe Connectors, & Braces for an updated selection.

Features & Details

  • Improves Control and Handling
  • Reinforces Stock OEM Cross Member
  • Adjustable for Fine Tuning Preload
  • Fits All 1994 to 2004 Mustangs
Improves Handling Performance. Designed to reinforce the OEM cross member (K-Member) during hard cornering, the QA1 K-Member Support Brace helps to keep the lower control arms from distorting during extreme conditions for greatly improved control and handling.

Adjustable. The QA1 K-Member Brace is currently the only brace on the market to feature an adjustable sleeve for fine tuning the pre-load.

Application. This QA1 Lower K-Member Support Brace is designed to fit all 1994 to 2004 Mustangs, including V6, GT, Bullitt, Mach 1, and SVT Cobra models.
What's in the Box
  • (1) K-Member Brace
Installation Info
Tech Specs

You Might Also Like

Customer Photos

More Products You Might Like

3 Questions / 3 Answers

Ask a Question

Bolt-on? Is this bolt on for 99-04, or is there drilling involved?


  • Yes to the existing hardware. If I recall correctly it does come with some prettier nuts and bolts


Helpful (0)

will this brace work with long tube headers


  • Yes it will. I just installed pacesetter longtubes on my mustang with the k member, it'll take some time but you should be able to get it on good!


Helpful (0)

Can this be only use on the oem factor k member Can this be combined with the the QA1 k member? If so would it even matter? also what about Qa1 k member + stock arms combo any benifits


  • This QA1 K-Member Brace (94-04 All) will work with the QA1 K-Member. I do apologize, I am little confused by what you are asking when you say "would it even matter". Upgrading to the QA1 K-member and the QA1 K-Member Brace you will notice a lot of weight savings in the front of the car along with really stiffening up that front end and helping dial in your suspension.


Helpful (0)

Customer Reviews (4) Write a Review

Overall Rating 3.5

out of 5 stars

Installation Time:Afternoon

  • Handling Improvement 3.5 3.5
  • Fit 3.25 3.3
  • Bang For Your Buck 4.25 4.3

  • 4/5

    Installation Time: Afternoon

    May 05, 2017

    Crystal's K Brace

    I have always had good service with AM. I love the products and free shipping. I got this brace and did a test fit at the shop. There is a hole in my 95 Cobra factory k member right where the forward arm of the QA1 brace is supposed to be mounted on the driver's side. This opening is about 1 1/2 inches square. I was not able to mount that corner at that time, but fabricated a piece of flat steel with a stud and use it to make that last connection. I do not know if ALL 95 Cobra k-members have this opening but it is good information to pass on. There was a slight clearance issue with the forward QA1 brace arms touching the k member but I notched it with an angle grinder so there was no rubbing between them. Did not notice a big change other than s little oversteer but VERY happy with the new brace. Don't turn the steering wheel if your not ready to change directions! I recommend AM to my best friend Sam all the time!


    Year: 1995 Submodel: Cobra

    Helpful (3)

  • 3/5

    Installation Time: Afternoon

    April 24, 2017

    Cool product

    This wasn't too hard to install and felt the difference instantly. The only thing I didn't like was how the center bar was very close to the oil pan. All in all glad I installed it


    Year: 2004 Submodel: GT

    Helpful (1)

  • 3/5

    Installation Time: Less than 1 Hour

    February 11, 2017

    Good but not great

    This was okay but doesn't seem strong enough will be returned


    Year: 2004 Submodel: Mach 1

    Helpful (4)

  • 4/5

    June 01, 2016

    It's great

    Not to bad bolted right into place took me a min to figure it out.


    Year: 2002 Submodel: Other

    Helpful (1)

Related Mustang Categories