Last Day! Guaranteed Free Delivery 12/24. Order by 5pm EST available on most items - Details

Talk to a Mustang Expert
1-877-887-1105
Every day 8:30AM EST - 11:00PM EST
Win $3,000 In Mods!! Enter Daily!

Cervini's Functional Ram Air Kit for Concept Hood (05-09 GT, V6)

AmericanMuscle no longer carries the Cervini's Functional Ram Air Kit for Concept Hood (05-09 GT, V6). Please check out 2005-2009 Mustang Hoods for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Ram Air Kit for Cervini Part# 1176
  • Makes Your Cervini Hood Functional
  • Decrease 1/4 Mile Times
  • No Tuning Required
  • Injected Molded Urethane
  • Fits 2005 to 2009 Mustangs
Ram Air Kit. Now you can make your Cervini Concept Style Hood fully functional with a Ram Air Kit. This Cervini Ram Air Kit channels the incoming air from the hood scoop openings directly into your intake for a ram air affect to increase performance.

Added Power And Performance. This Cervini Ram Air Kit has been proven (using an on-board diagnostic system) to increase 1/4 mile performance resulting in lower ET's. You will experience better throttle response, and an increase in horsepower starting at 40 mph, all with no computer re-tuning required.

Show quality appearance. The included billet aluminum air screen adds a nice touch to the under hood appearance and functionality of this ram air kit. Best of all, Cervini's makes this kit easy to install, with a minimum of cutting and modifications to the stock air box.

Application. This Cervini "Ram Air Kit" is designed for use on any 2005 to 2009 V6, GT, or Bullitt Mustang with a Cervini Concept Ram Air Hood (part# 1176) installed. Cervini hood sold separately.

Fitment: 2005 2006 2007 2008 2009 Details

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

What's in the Box
Hardware included:
  • (1) Adhesion promotion packet
  • (7) Small hex head screws
  • (1) Roll of 2-sided tape
  • (30) Dripp point screws
  • (1) Intake screen
  • (2) Washers
  • (4) Small black screws
  • (1) Nut
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (6) Submit Your Photo

View All 6 Photos

More Products You Might Like

Questions & Answers (9)

5 Top Rated Questions

Will rain get into the air filter?

  • No. i have this on my car and I have had absolutely no issues with my filter getting wet and i've gone through puddles that have splashed into the scoops even. you have a drain hole in your stock air box that you will open up a little more in the install process to compensate the extra water and you still have to fill a puddle of about 4-6" before it will even reach the filter. You will not have any issues.

Helpful (3) Show 1 more answer

I bought the SR Performance Aluminum Cold Air Intake and was wondering if this will fit properly.

  • Installing the Cervini's Functional Ram Air Kit for Concept Hood will require some modifications to fit with the SR Performance Aluminum cold air intake. Cervini's makes this kit easy to install, with a minimum of cutting and modifications to the stock air box. Installing any other intake besides a stock air box will involve modification to allow it to fit properly.

Helpful (0)

If I have an airaid cai already, will this still be beneficial for high end power? Most of my racing is on the interstate and my car has 3.73 gears and is heavily modded (naturally aspirated) but stops pulling hard around 90-100 mph

  • The Cervini's Functional Ram Air Kit for Concept Hood will allow your intake temperatures to lower and get rid of any heat soak. It would be difficult to say how beneficial this would be for your car without knowing the modifications, however, any cooler air is always beneficial.

Helpful (0)

can someone please tell me if these kits are made ford 2nd gen lightning im dying to have it

  • Unfortunately we can only guarantee fitment for Ford Mustangs.

Helpful (0)

Will this work with a Rouschcarger?

  • Unfortunately this part has not been tested with the Roush supercharger. It appears that the supercharger would interfere with ram air system. There would not be enough room for both items in the engine bay.

Helpful (0)
Post Your Question
4 More Questions
Will the ram air kit fit with an aftermarket cook air intake? 1 answer
Will this also fit Cervini's Ram Air type IV hood? 1 answer
will it fit the american muscle concept hood or only the cervini's? 2 answers
What accessories work well with this? Looking to find out if i can use a cold air intake with this Ram Air Kit? 2 answers

Customer Reviews (5) Write a Review

Overall Rating 3.8

out of 5 stars

Installation Time:Full Day

Installation Cost:$100-$250

  • Fit 3.8 3.8
  • Appearance 4.4 4.4
  • Bang For Your Buck 4.4 4.4



  • 1/5

    February 06, 2018

    Wasted Money

    I bought this when I bought my hood. Had to save the money to have them painted and installed. Found out after it was painted that it doesn't fit the hood I bought it for. This item was suggested when I made the purchase so, I spent the $300.00 plus. Looks really nice painted sitting in my shed.

    RickD

    Year: 2007 Submodel: GT

    Helpful (4)

  • 5/5

    Installation Time: Afternoon

    August 22, 2014

    Ram Air Installation

    This is a great addition to your Cervini hood. It is custom fit and very easy to position for the install. You may want a helping hand to hold it up while you install the self tapping screws into hood. The screws hold it in place,be sure to install them by hand with a screwdriver. Do Not use a cordless drill or any other motor driven type screwdriver because you will strip out the threading in the fiberglass. The airbox modification is easily done with a hand held grinder. Be sure to purchase some sealant to run along all edges to make it airtight. I also used some of my own screws to aid in assembly of the airbox This mod gave me great throttle response and is awesome once you hit about forty miles an hour. Looks great and also keeps the engine bay clean,without it your engine gets everything dumped on it that comes through the scoops. Go ahead and get one and don't be afraid to install yourself. Easy mod with great return Jim Johnson

    Jim57

    Year: 2008 Submodel: V6 Wisconsin, USA

    Helpful (5)

  • 4/5

    Installation Time: Afternoon

    May 22, 2013

    Nice to have

    Good Fit , Complete Set with Screws and Tapes. The Manual has not a lot pics :-(

    ArthurFrei

    Year: 2005 Submodel: GT Switzerland

    Helpful (5)

  • 4/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    October 06, 2012

    Must have for Cervini Concept Hood!

    I took ram air kit with concept hood to body collision repair/paint shop. Had ram air kit painted to match hood. The visual look is seamless. I recommend spending the little extra, especially when you are already painting the hood. Also a little extra 3M adhesive tape goes a long way giving you a completely air tight seal. And while your at it a little weather striping around the hood kit where it makes contact with air box for a positive contact.

    Quorra1

    Year: 2007 Submodel: GT WA

    Helpful (7)

  • 5/5

    Installation Time: Afternoon

    August 26, 2012

    Cervini's Ram air Kit

    If you have a cervini's ram air hood. This is a must have! It rams cold air directly into your air box and gives you better gas mileage and acceleration. It may not show a direct power increase on a dyno but once you're rolling and you hit the throttle you will hear the engine unless its true power with ease and launch into action! I recently installed this kit and was rolling on the highway at 70mph and punched the throttle and INSTANTLY was at 105mph!!!!! It also adds a lot of appearance to the under hood of your pony. For sure worth the money and and 10 out of 10!

    jonnyb8891

    Year: 2007 Submodel: V6 MI

    Helpful (5)

Related Mustang Categories