- (4) LED Bulbs
- Hardware included:
- None Required
Raxiom Reverse Light LED Conversion Kit (10-12 All)
Hey I’m Justin with AmericanMuscle.com, and I’m checking out some modern LED lighting from Raxiom for all 2010 and newer Mustangs. Raxiom is without a doubt the industry leader in producing cool and stylish lighting specifically for your late model Mustang. Interior or exterior, retro or modern, Raxiom has something for your ride. The LED lighting I’m checking out here are the license plate LEDs, front/rear side markets, reverse light conversion kit, and finally the switchback turn signal conversion kit. So what are some of the benefits of going with LED lighting, well for one, they look much better, these LEDs shine bright white with a small touch of blue as opposed to the dim, yellowish look of incandescent bulbs. Not only will this bright light look good and help your appearance, but it’s also going to help your safety by increasing your visibility. Finally, LED lighting lasts much longer than your standard automotive bulbs, and it also uses less power. The majority of LED lighting acts like a standard bulb meaning it’s either on or it’s off, with the exception of these switchbacks. These lights turn from bright white to amber then back again, thanks to the included resistors. Just a cool little feature that adds a little more styling to the front of your ride. With the exception of the switchbacks, all these LED bulbs install easily in about 15 minutes per set with no modification needed, simply unplug the factory bulb and plug the Raxiom bulb in its place. As for the switchbacks you will need to splice in the included resistors, which will stretch the install time slightly to about 30 minutes. So if you’re looking to add the unique glow of modern LED lighting to your ride, then check out these different lighting options available from Raxiom, right here at AmericanMuscle.com
Fitment: 2010 2011 2012 Details
Installation Time: (approx) 15 Minutes
Difficulty Level:Simple installation for anyone
This LED kit makes the rear of the Shelby GT500 stand out compared to the OE bulbs. These are brighter, whiter, and only takes about 5 minutes to install, 3 bolts on each tail light assembly, plus 2 plastic ... screw caps that hold the plastic trim inside the trunk, pull back a little bit of carpet and you are in business. Had very good compliments during the install process and once the install was complete. You can see a huge difference, the lights should have been included from Ford. It is worth every bit of money to have these installed. These do work with the OE tail light assembly. I'm extremely happy and I would recommend these to anyone who has a 2010-2013 Mustang.
This much $ for reverse lights? ... I know. However, I would buy them again due to the fact that it's like backing up in the daylight when's its midnight. I have a 20% tint all the way around and I could ... not see anything behind me with the worse-than-awful stock bulbs. So roll down the window, right. Well of course, but it does thunderstorm where I live... After installing this kit (simple), I can see everything clearly - with the windows up. It's like having those high-beam spotlights attached to the back of your vehicle (the flashlights that deer-hunters use). Bad analogy. Needless to say -they are very bright. Stop reading and throw them in the cart.
Are these compatible with the Raxiom Taillights? I bought and really like the Raxiom Tailights on my 2012, just wondering if anyone had combined these LEDs with those yet and how it worked out.
100% with the Aero's; I have these installed with the smoked Aero taillights which improved the light spread of the original bulbs, with these leds it was akin to installing HID bulbs much brighter, light spreads further! a worthwhile safety upgrade!
Will these work with stock tail lights?
will these fit my car I have a 2011 mustang gt california special. the owners manual says that my reverse bulb size is 912. will these fit my car because i am in desperate need of a MUCH brighter reverse light bulb.
Yes they will fit and work without any problems whatsoever.
Can I use them with the sequential lights?
You can use these in addition to the sequential lights, but you can't plug these into the sequential light housings. Not sure of which situation you meant. The reverse lights are completely separate from the brake LED's and are plug and play.
Will these work on a 2013 Boss? Thanks...
No these only work on models from 2010 through 2012
February 15, 2013
Raxiom Reverse LED kit on 2011 Shelby GT500
This LED kit makes the rear of the Shelby GT500 stand out compared to the OE bulbs. These are brighter, whiter, and only takes about 5 minutes to install, 3 bolts on each tail light assembly, plus 2 plastic screw caps that hold the plastic trim inside the trunk, pull back a little bit of carpet and you are in business. Had very good compliments during the install process and once the install was complete. You can see a huge difference, the lights should have been included from Ford. It is worth every bit of money to have these installed. These do work with the OE tail light assembly. I'm extremely happy and I would recommend these to anyone who has a 2010-2013 Mustang.
May 18, 2012
Daylight at Midnight
This much $ for reverse lights? ... I know. However, I would buy them again due to the fact that it's like backing up in the daylight when's its midnight. I have a 20% tint all the way around and I could not see anything behind me with the worse-than-awful stock bulbs. So roll down the window, right. Well of course, but it does thunderstorm where I live... After installing this kit (simple), I can see everything clearly - with the windows up. It's like having those high-beam spotlights attached to the back of your vehicle (the flashlights that deer-hunters use). Bad analogy. Needless to say -they are very bright. Stop reading and throw them in the cart.
August 20, 2013
If you really want ur pony to stand out in a crowd, especially at night when all the other pony's are around, you defiantly need this. Could not be easier to instal and will make you mile as soon and they light up.
April 19, 2012
I purchased the led plate light and loved it, so to match, I purchased the led reverse lights. Easy to install and much brighter and whiter than the yellowish stock lights.
November 24, 2016
Easy install and the difference is amazing! The yellow is gone and pure white lights here. The backup camera is much clearer at night now!
August 09, 2016
Extremely bright Want to light up everything behind you this is the way to go
September 17, 2015
I just got my windows tinted a few weeks ago so to make sure I sure I can see as I backed up at night. Purchase these lights you will not be disappointed.
August 20, 2015
Leds are bright plus get the car a cleaner look instead those ugly yellow reverse lights
June 12, 2015
Perfect 10 minute mod, this item took me only a few minutes to install and it looks great on the car. It looks much better then the stock yellow lights!
November 09, 2014
LED's make Huge difference
2012 covertible with back up camera. LED's make a huge difference. I have tinted windows and helps a lot if you are looking back. My wife now wants these on her SUV. I also did the license plate lights and they are very cool.
September 26, 2014
I have 5% tint so it's black looking into my car and not so great looking out the back window. I'd say these lights are easily 3x brighter than the OEM bulbs. It is literally the difference between night and day when you have dark tinted windows. The lights were really easy to install. All you need is either a crescent wrench or a 7/16" wrench to unbolt the tail light assemblies. I had a slight hiccup in my install that had the AM experts scratching their heads for a minute. On my 2012 the outside reverse lights weren't turning on but the inside lights were. I even tried swapping the bulbs from inside to outside. After some internal conversations with their tech guys they recommended flipping the bulbs 180 in the socket because it might be a resistance issue. That worked and now the lights work perfectly. If you run into a light that won't turn on, try flipping the bulb around 180. I highly recommend these lights. They look great and I have the piece of mind that I will probably never have to change them again because the LED life span is so long.
August 22, 2014
Amazing upgrade now complements the front end lights
As another reviewer has noted, don't know why Ford wouldn't' have put LED's throughout the entire Mustang. My 2010 is a Pony package that came from the Factory with LED interior lighting under the dash, at the cup holders, and at the sill plates, but not for the map light, license plate, and reverse lights. Considering the headlights and other lighting in the car were LED's I bought LED bulbs for the map light, license plate, and reverse lights and installed yesterday. The side marker lights might not be LED, and the trunk light is not LED, but am not at this time changing any of these out. The LED upgrades I've just done have definitely sharpened up the appearance of my Kona Blue 'Stang!
July 16, 2014
looks great, easy install!
a few minutes per side to install - if you can work a wrench and unplug the harnesses you can install these. took me about 20 minutes to do both sides, the difference in night vision is great since I have 20% tint all around.
April 14, 2014
Raxiom Reverse Light LED Conversion Kit
Not sure what happened, but when I ordered these I was sent only one pair, instead of two. I bought these to be used with the Axiom Aero tail lights.I got around to installing them not too long after AM sent me the missing second pair of LED lights. After removing the stock incandescent lights and swapping them with these and bolting everything back up, I had a friend help me test functionality. Only one of these LED bulbs installed lit up when he dropped it into reverse. I took both tail lights off and checked to make sure the bulbs were seated in their sockets. Again I bolted the Aero tail lights back up and asked my friend to test them while I looked at the bulbs from the rear to see if they lit up. This time none of them lit up. Again I disassembled both tail lights and this time swapped the LED bulbs back to the stock incandescent bulbs. Again asked my friend to test the functionality. Everything worked fine. I've since returned these back to AM. I don't know if the bulbs were defective or not, but the stock bulbs work just fine....they may not be as bright or as white as the OEM bulbs, but at least they work reliably.
April 08, 2014
Big improvement to the rear of the car. Looks much more updated. Receiving lots of good comments.
March 10, 2014
awesome look and easy install
Easy install and awesome look. Definitely lights up everything behind now. Looks great when paired with license plate LEDs.
December 30, 2012
sweet look, very bright
these lights are awesome! very bright, and look incredibly better than the stock bulbs. very happy with my purchase
August 10, 2017
Reverse lights along with the brake lights have NOT worked correctly since the install . I consulted with the ford service department they informed me that the LED voltage is different from the OEM bulbs and Causes the ECU to fault in regards to that lighting circuit. I removed them. Problem solved.
July 26, 2017
Reverse light LEDs
These LEDs really make a difference when you're backing up, not only can you see a bit better in the dark from the light, but overall just a more stylish look, and took maybe 10 minutes to install, if that.
July 25, 2017
With dark tinted windows backing up at night was a nightmare. These raxiom LED reverse light bulbs is MUCH brighter than factory bulbs