How to Install Raxiom Smoked Vector Tail Lights - White Diffusers (05-09 All) on your Ford Mustang

Step 1: Using a panel removal tool or plyers, remove the (2) lower clips on the trunk trim panel. Then unscrew the upper fasteners.

Step 2: Remove the (3) tail lights bolts.

Step 3: Unplug the factory tail light harness, and remove.

Step 4: Connect A to B to get the lights to sequence with the turn signals. Connect A to C to bypass the sequential turn signal.

Step 5: Transfer the factory reverse bulb into the new tail light.

Step 6: Install the new tail light in reverse order.

Trouble Shooting:

If using LED reverse light, always check the polarity. If needed, flip the bulb in the socket 180*. Cycling the key on and off may also be required.