Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter daily!
Win $3,000 in Roush Blackout Mods! Enter Daily!

Raxiom Vector Tail Lights - Red Diffusers (10-12 All)

AmericanMuscle no longer carries the Raxiom Vector Tail Lights - Red Diffusers (10-12 All). Please check out 2015-2019 Mustang Tail Lights for an updated selection.
$379.94
Market Price $449.99 You Save 16% ($70.05)

Sold out (pair)

FREE Shipping

  • Item 399162

Will this fit your Vehicle?

    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Sixth Generation Inspired Styling
    • Enhanced Visibility for Additional Safety
    • Exceptional State of the Art Electronics
    • Red Outer Lenses with Red Diffusers
    • Gloss Black Housings
    • Retains Sequential Turn Signal Function
    • DOT Compliant
    • Direct Fit, Plug and Play Installation
    • Sold as a Pair, Driver and Passenger Side Included
    • Fits All 2010-2012 Ford Mustang Models

    Review & Installation Video

    Review & Install Video

    Sixth Gen Styling. Add sixth gen inspired styling to your 2010-2012 Mustang with a set of Raxiom's Vector Tail Lights. These Vector Tail Lights feature a modern sculpted design with three red inner diffusers. Totally changing the appearance of your S197 Mustang, these Vector Tail Lights even sequence when the turn signals are activated.

    Retains Sequential Turn Signals. These Vector Tails were designed with a very popular component that not only looks awesome, but supplies an added bit of safety when out cruising. When the turn signals are activated, they will sequence from the center light out and repeat until switched off. Please note that these lights do not sequence with the brake or hazard lights.

    High Quality Modern Electronics. Manufactured to precise standards from OEM quality materials, these Raxiom Vector Tail Lights are assembled with state of the art electronic components. These Tail Lights feature durable gloss black plastic housings with red lenses, three red inner diffusers, and high intensity LEDs to provide brighter, longer lasting light. Each Light is weather sealed to prevent dirt and moisture from harming the electronics found inside.

    Plug and Play. Using basic hand tools, installation of these Tail Lights should take no longer than an hour to complete. Simply remove your current tail lights and disconnect the wiring, plug in the pre-attached wiring harness on your new Raxiom Vector Lights and reinstall. It's a simple upgrade that makes a big difference in appearance and safety.

    DOT Compliant. These Raxiom Vector Tail Lights will not only bring a fresh new look to your Mustang, but they also meet or exceed the strict guidelines set forth by the U.S. Department of Transportation (DOT), making them legal for street use.

    Application. This pair of Raxiom Vector Tail Lights with Red Diffusers are specifically designed to fit all 2010-2012 Mustangs, including the V6, GT, BOSS and Shelby GT500 models. Driver and passenger side tail lights are included.

    Please Note. This is a product designed for Mustangs sold in the US. It will not function properly on Mustangs sold in the EU or UK without modifications being made to the wiring harness.

    Fitment: 2010 2011 2012 Details

    MPN# 399162

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    • (1) Right Hand/Passenger Side Tail Light
    • (1) Left Hand/Driver Side Tail Light
    Installation Info
    Will it fit my Mustang?

      Customer Photos (42) Submit Your Photo

      View All 42 Photos

        Questions & Answers (10)

        5 Top Rated Questions

        Is there any images or video previewing the product on the actual car?

        • At this time, we do not have any installed images of the Raxiom Vector Tail Lights. These are in queue to be installed and photographed, and those will be added to the product page once they are available.

        Helpful (3)

        I know these lights retain the turn signal function for the act of turning, but my question is if the raxiom tail light sequencer (MPN# 301042) still allows the "hazards" and "brake lights" to sequence as well?

        • The Raxiom Vector Tail Lights will retain the sequential function on the Hazard and Brake Lights as well.

        Helpful (1)

        Raxiom Vector Tail Lights - Red Diffusers (10-12 All) Do they plan on making this for the 13-14 model years? Thanks.

        • Unfortunately the Vector Tail Lights will not be offered for the 13-14 Mustang models at this time.

        Helpful (0)

        I have sequential turn signals from the factory. Will this carry over to these lights?

        • The Raxiom Vector Tail Lights will retain the factory sequential function.

        Helpful (0)

        Are these smoked lenses? Stock pics look like they come smoked but custom pics seem like they are not. If not can we order them smoked but not blackened like the other two types?

        • The Raxiom Vector Tail Lights will not come with smoked lenses. It will have a black housing though. The tail lights we offer with smoked lenses will be the Raxiom Vector Tail Lights- item 399164 https://www.americanmuscle.com/raxiom-vector-smoked-tail-lights-white-diffusers-1012.html

        Helpful (0)
        Post Your Question
        5 More Questions
        So I see mention that these don't fit 2013-14, however I happen to have converted to the 2010-12 rear end while keeping my 2014 tails. I would like to try these tails but I would need to know if it is just the wiring that's different or anything else. Thank you 1 answer
        Before ordering these rear tail light, I just want to make sure it fits 2010 Shelby GT500. Thanks for your time 1 answer
        Would these fit the 13-14 models? If not, could any modifications to the rear end be done to accommodate these lights? 1 answer
        Is there any video of these? I would like to see them on an actual mustang. Thank you. 1 answer
        Will the Raxiom Tail Light Sequencer for hazard and brake lights still work with these tail lights? 1 answer

          Customer Reviews (41) Write a Review

          Overall Rating 5

          out of 5 stars

          Installation Time:Less than 1 Hour

          • Visibility 4.926829 4.9
          • Fit 4.829268 4.8
          • Appearance 4.902439 4.9
          • Bang For Your Buck 4.463415 4.5



          • 5/5

            Installation Time: Less than 1 Hour

            April 07, 2019

            What the 2010 mustang should have

            Excellent fit and finish very much like OEM. They look fantastic and the range of colour is perfect. Love them

            GordonB

            Year: 2010 Submodel: GT500

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            April 02, 2019

            What a difference

            Fantastic fit and look. These totally changed the look of my Mustang.

            Nino

            Year: 2012 Submodel: V6

            Helpful (0)

          • 5/5

            Installation Time: Afternoon

            March 29, 2019

            Very good taillights.

            I put these on my 2011 Mustang. They look awesome compared to the factory taillights which to me look uninspired.

            Alton

            Year: 2011 Submodel: GT

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            February 20, 2019

            Raxiom Vector Tail Lights

            Very impressed with the improvement in the looks of the rear of the car with these Tails. Looks way better than the stock Ford Tails. Easy enough install however the top retainers for the inner trunk panel dont align very well on the Raxiom studs, they seem to be offset or oriented slightly different than the OE ones. I am pretty fussy about fit and finish so this might not matter to some. I think in the install video AM didnt install these retainers and make mention of not installing them. I have to wonder now if they had the same problems I am seeing. For this reason I am rating the fit as a 3 stars.

            Timothy

            Year: 2011 Submodel: GT500

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            February 16, 2019

            Taillight Perfection

            What the taillights should have been on the 2012. The fit is perfect and the workmanship and finish are top notch. They are so easy to install with OEM plugs.

            Ribmaster05

            Year: 2012 Submodel: GT

            Helpful (0)

          • 5/5

            Installation Time: Shop Install

            January 25, 2019

            Vector Tail Lights

            I love my new Vector Tail Lights They update the look of my mustang. They fit perfectly in the original settings. People make many comments they love the modern look.

            Sarge

            Year: 2010 Submodel: V6

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            December 31, 2018

            Emil's-2011 Mustang GT Premium

            Just put these on. They look awesome. Changes the whole appearance of the back end. These S550 taillights do really make a big difference. Ford should have put these on the Mustangs when they went Reto back in 2005. Little pricey but gives the car more of a muscle look. Very happy with the way they look

            EmilD

            Year: 2011 Submodel: GT

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            December 26, 2018

            Raxiom Vector Tail Lights

            This was by far one of the easiest installs to date, and it gives my Mustang a huge appearance upgrade from the rear. Everything works perfectly (brand new), and the lights shine brightly. Having the sequential tail lights work right out of the box made this a no-brainer purchase. I was going to upgrade to the 13-14 style tail lights, but the price was way too expensive. Glad I waited for these to come out.

            ScottC

            Year: 2011 Submodel: GT

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            November 24, 2018

            Awesome

            If you are like me and think the stock tail lights look too plain and boring then these are probably the best you can get, I originally wanted to get a full conversation to the 13/14 model tail lights but its way too expensive so I decided to go for these and I'm glad I did, took me around 20 minutes to install, I've only had them on about a month and I've had alot of people say how cool they look, I recommend getting a black decklid pannel to go with them if you haven't already got one

            JayH

            Year: 2012 Submodel: V6

            Helpful (4)

          • 4/5

            Installation Time: Less than 1 Hour

            October 18, 2018

            new tail lights

            great new s550 look for 2010 gt they were a little rough out of the box sealed in plastic bags but still had a lot of scratches was able to polish a lot of it out but they look AWESOME would give it 5 stars if they put some protective film for shipping especially on the gloss black areas.

            DarylG

            Year: 2010 Submodel: GT

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            August 22, 2018

            you gotta get these

            fantastic looking tail lights. They took almost an hour to install. the only issue was trying to get the rubber insert back in the whole.

            Zach

            Year: 2011 Submodel: V6

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            August 02, 2018

            Perfect!

            The quality of finish and fit is excellent, 100. Installation was very quick and easy. The look is improved tremendously the best exterior mod there is for the 2010-2012 models.

            JayL

            Year: 2012 Submodel: GT

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            July 27, 2018

            tails

            These tails are the ticket. They have changed the rear look from dull to Fast..L E D work perfect, fit and finish are perfect!!

            TAZOR

            Year: 2011 Submodel: GT500

            Helpful (1)

          • 5/5

            Installation Time: Less than 1 Hour

            July 24, 2018

            Great new look

            Been waiting a while for a good tail light replacement option for my 2010, and was even debating getting the upgrade kit to the next model year lights. As far as bang for your buck and looks go- this is about as good as it gets. Paired it with the MMD spoiler and couldn’t be happier with the result. Infinitely better than the flat, stock lights, and much cheaper than alternative options.

            DankeyStang

            Year: 2010 Submodel: V6

            Helpful (2)

          • 5/5

            Installation Time: Less than 1 Hour

            July 19, 2018

            Great lights

            Love how they look on the car and they were very easy to install.

            JelianieS

            Year: 2012 Submodel: V6

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            July 13, 2018

            Great Value

            Loved the tailights, give the rear end of the vehicle a serious face lift! Only knock is the rubber around the lens was uneven and the glue wasn't that great. What car guy doesn't have extra glue around, so I can't complain too much. Great product, great look!

            Chris

            Year: 2011 Submodel: GT

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            July 13, 2018

            Head-turning Style

            I receive non-stop compliments on my new Raxiom Vector tail lights. This is a must-have modification for any 2010-2012 Mustang. They have the high quality fit and finish I've grown to expect from Raxiom products. Great job American Muscle!

            RaceRedGT500

            Year: 2012 Submodel: GT500

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            July 05, 2018

            So Hot !!!

            This is great product was easy to install well worth the Bucks

            MikeH

            Year: 2010 Submodel: GT500

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            July 05, 2018

            Gorgeous

            These really set off my 2011 Mustang. They look great and add a bit of extra style. Have received many compliments already.

            wyzard

            Year: 2011 Submodel: V6

            Helpful (3)

          • 5/5

            Installation Time: Afternoon

            June 30, 2018

            It looks way better!

            Old boring, new looks sharp and modern. Saved money from buying a new stang.

            Darby

            Year: 2012 Submodel: GT

            Helpful (3)

          Related Mustang Categories