Customer Reviews (27) Write a Review

Overall Rating 4.4

out of 5 stars

Installation Time:Afternoon

Installation Cost:$100-$250

• Fit 4.166667 4.2
• Appearance 4.625 4.6
• Bang For Your Buck 4.5 4.5

• 2/5

  Installation Time: Full Day

  January 28, 2019

  If you can find another option.

  The directions are horrible. Very vague, you have to figure lots of stuff out on your own. The template you have to cut out is also horrible. The studs you put on the sides are too big, if you put them in the 1" it says you ruin the center piece of the valance. Poor pictures as well. It can be done but dont expect anywhere near their 2 hour time frame.

  JasonM

  Year: 2015 Submodel: GT

  Helpful (1) Thanks for your input!

  • Fit 1

    1

  • Appearance 3

    3

  • Bang for your Buck 1

    1
• 3/5

  Installation Time: Full Day

  December 25, 2018

  Fitment issues with Double Sided TAPE!

  No printed or written instructions came with the valence. Had to log on to website and try to follow pictures and some vague instructions. Being pretty mechanically inclined, installation was sort of self explanatory, BUT, when I see double sided tape used to help hold things together, I get worried. After 13 screws and 2 bolts, plus some tape, the valence does not fit real snug to the bumper. It is very close in some places, and has a very noticeable gap in others. Not the kind of quality I expected...

  RussellC

  Year: 2016 Submodel: GT

  Helpful (1) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 2/5

  Installation Time: Afternoon

  November 27, 2018

  Would not fit right

  The only problem we had is that it did not fit right we cut where we need to and drill where we need it too. It left a gaps on the bottom of the bumpers

  Omar

  Year: 2017 Submodel: GT

  Helpful (4) Thanks for your input!

  • Fit 1

    1

  • Appearance 2

    2

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  September 27, 2018

  Turned out nice

  I installed this on my base performance pack. Alot of cutting but it was worth it. Not for faint of heart

  CodyC

  Year: 2017 Submodel: GT

  Helpful (5) Thanks for your input!

  • Fit 3

    3

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  September 13, 2018

  ROUSH QUAD TIP

  My local body shop was able to install this Roush on a Non Premium GT. I NOW HAVE QUAD TIP EXHAUST.

  RobertI

  Year: 2015 Submodel: GT

  Helpful (4) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  September 07, 2018

  Perfect fit

  For anyone looking to step up your pipe game to that quad tip look, this is a perfect fit. Especially if you don't to pay 700 plus bucks for the Gt350 style valance.

  RexH

  Year: 2015 Submodel: GT

  Helpful (4) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 3/5

  Installation Time: Full Day

  June 14, 2018

  It looks good, but the install is awful.

  When I received this, I was pumped - it looks great out of the box, the instructions seem good, and I wanted it installed. Well, getting to the point of no return (where you cut your bumper) is fine, but after that, the instructions are garbage. They tell you to put the studs in the wrong boss, and when you try to install it onto the bumper, you can't, because there are standoffs behind the reflectors that hit the bumper. Then, you wrestle it, and the bosses break. Then, there's nothing to stop you from pushing the studs through the plastic and making marks on the outside. I contacted Roush, and they sent me a new center section, and promised to update their documentation and procedures with the correct information, but I have no idea if they did. It looks nice on the car, no doubting that, though because of install issues, it's tough to completely snug it against the bumper cover, so you do get a slight gap in certain places. Install definitely takes a full day, and it's better if you have an extra set of hands.

  jacknifetoaswan

  Year: 2016 Submodel: GT

  Helpful (5) Thanks for your input!

  • Fit 2

    2

  • Appearance 4

    4

  • Bang for your Buck 3

    3
• 4/5

  Installation Time: Afternoon

  April 07, 2018

  Nice. Allows quad tips.

  One of very few options for allowing quad tips for a 15-17 GT. I'm running these with a Corsa Sport quad tip exhaust, and while they don't fit together EXACTLY right, they are close. Had to adjust the exhaust to line up with the pass-through area on the valance. Gives a lower, more agressive look to the rear end. Wish it were a half or maybe 3/4 inch lower, but it's good. The pieces that flow back from the wheel wells are separate, so there is a seam there that isn't there on the stock premium valance, but not a huge deal. Recommended.

  MattW

  Year: 2017 Submodel: GT

  Helpful (5) Thanks for your input!

  • Fit 4

    4

  • Appearance 4

    4

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Full Day

  April 05, 2018

  Roush Rear Valance

  This product is a must if you really want to get a quad tip exhaust kit. It was about a day for it to get installed. In the long run it was totally worth it.

  Henry

  Year: 2016 Submodel: EcoBoost

  Helpful (5) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  February 09, 2018

  Very clean

  This balance has completely changed my GT. It was an easy install for someone with skill and only took a couple hours. Impressed with the integrity.

  BarryW

  Year: 2016 Submodel: GT

  Helpful (6) Thanks for your input!

  • Fit 4

    4

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  February 08, 2018

  Looks Incredible!!

  Paired with the Corsa quad tipped exhaust it looks stunning.

  ArturoP

  Year: 2017 Submodel: GT

  Helpful (7) Thanks for your input!

  • Fit 4

    4

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 3/5

  Installation Time: Afternoon

  October 13, 2017

  For my roush valance

  Complicated for nothing after tight the screw i see little bit hole in the middle bumper and valance the best is sell the complete bumper for little bit more expensive and no big working like this for try to fit good

  AnthonyB

  Year: 2017 Submodel: GT

  Helpful (7) Thanks for your input!

  • Fit 3

    3

  • Appearance 3

    3

  • Bang for your Buck 3

    3
• 5/5

  Installation Time: Afternoon

  October 08, 2017

  Lengthy install but worth it

  If you’re in the market to go quad tip exhaust this is the affordable only option out there. It’s kind of sketchy cutting and drilling into your bumper but it’ll all be covered up once the valence is installed. I found the directions on the Roush website and they are very clear and easy to follow.

  JesseO

  Year: 2017 Submodel: GT

  Helpful (7) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Shop Install

  Installation Cost: $100-$250

  August 30, 2017

  Best mods on my car

  The Roush rear valance not only cleans up the look of my car, it looks like it came from the factory that way. Great fit, no gaps. Great upgrade for the money.

  Jimbob

  Year: 2017 Submodel: GT

  Helpful (7) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 4/5

  August 29, 2017

  Will not fit on base GT

  Will not fit on base GT, overall American muscle only charged $10 shipping fee which is nice.

  HanleyS

  Year: 2017 Submodel: GT

  Helpful (7) Thanks for your input!

  • Fit 3

    3

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  July 21, 2017

  The Truth

  This came well packaged and shipped super fast. It really changed the appearance of my 2015 Mustang GT. The valance was easy to paint and directions were easy to follow.

  hemistar1

  Year: 2015 Submodel: GT

  Helpful (8) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  June 21, 2017

  Roush Rear Valance

  Fit and finish is top quality. Install wasn't too bad, but make sure you have the template lined up as perfectly as possible. Once you have the holes drilled, it's smooth sailing. An extra set of hands will come in handy.

  ponie1992

  Year: 2016 Submodel: GT

  Helpful (8) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Afternoon

  May 09, 2017

  Overkill, but that's not a bad thing

  The install on this is something you'd expect on a factory piece. Drilling 13 holes to screw it on after putting it on with double sided tape seems a little overkill, but that's not a bad thing. It is made to be high quality, I am happy with the finished product.

  MatthewM

  Year: 2016 Submodel: GT

  Helpful (8) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Afternoon

  April 15, 2017

  Perfect fit n finish

  Real nice piece but scary install the thought of cutting into a brand new bumper much less taking it off the car but easy install just be careful and align the template with the tabs correctly and you wont have anything to worry about

  dee23

  Year: 2017 Submodel: GT

  Helpful (8) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Less than 1 Hour

  March 09, 2017

  Roush Rear Valance

  This was a great detail for the S550 rear end. It's looks stock but the Rear Valance with the Corsa Wuad tips makes it stand out. Very Sexy

  CharlesS550

  Year: 2015 Submodel: GT

  Helpful (8) Thanks for your input!

  • Fit 5

    5

  • Appearance 5

    5

  • Bang for your Buck 4

    4