Talk to a Mustang Sales Tech
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$20K Sweeps! 10 Chances to Win! Enter Daily >

Best Sellers

How to Install a Roush Square Tip Axle-Back Exhaust on your 2011-2013 Mustang GT

Installation Time

1 hours

Original Exhaust System Removal
Note: With a used vehicle, we suggest a penetrating spray lubricant to be
applied liberally to all exhaust fasteners and allowing a significant period of time
for the chemical to lubricate the threads before attempting to disassemble.
1. Loosen the two (2) clamps shown in Figure 1 located just behind the hpipe.


2. Loosen the (2) clamps shown in the Figure 2 located just in front of each muffler assembly.


4. Place the original clamp over the expanded end of the left (driver) side intermediate pipe and set it back into position by first installing the rear portion into the muffler assembly.
5. Repeat step 4 for the installation of the right (passenger) side over axle pipe.
6. Install the exhaust tips and clamps onto the muffler assemblies as shown in Figure 7.


Best Sellers