$7,000 Summertime Mustang Build Enter Now!
Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST

Free Shipping On Orders Over $49. Details

Schroth QuickFit Harness - Blue (05-17 All)

Market Price $304.75 You Save 13% ($39.75)
Starting At

$265.00

FREE Shipping
  • Item 392948
  • MPN# sr 17111

Choose options to add to cart

Features & Details

  • 4 Point Removable Harness
  • Ideal for Track and Street Use
  • ASM - Anti SubMarining Technology
  • Works with Factory Seat Belt Receptacles
  • 2" Wide Blue Polyester Webbing
  • Fits All 2005-2017 Mustangs
Four Point Removable Harness. Do you enjoy taking your daily driven Mustang to track and autocross events, but find it difficult to stay behind the wheel when taking a tight turn? If so, you may want to consider a Schroth Quick Fit Four Point Removable Harness. The Quick Fit Harness will keep you securely planted behind the wheel of your Pony for complete control, while you're out on the course. Schroth designed their Quick Fit Harness to be removable with no permanent modifications required. Being removable the Quick Fit Harness can easily be installed and removed as needed making it the perfect harness for the weekend track warrior.

ASM Technology. The Schroth Quick Fit features Anti-Submarining (ASM) Technology that positions the lap belt low across the pelvis. This keeps your hips and back side firmly planted in the seat preventing you from sliding under the lap belt in the event of a collision.

Works with Factory Safety Restraint System. The Schroth Quick Fit works with your Mustangs existing factory seats and safety restraint system allowing for easily installation and removal. The Quick Fit clicks into the car's female seat belt receptacles and anchors to the factory points which are load tested to withstand a 3,000-pound force for 6 seconds. By using the stock seat belt receptacles the vehicle is aware that a person is seated and restrained, silencing the warning chime as well as taking full advantage of the factory seat belt pre-tensioner.

Polyester Webbing. Schroth's Harness Belts are made from 2" wide polyester webbing. Engineered with “memory effect” Schroth's polyester webbing features special mono filaments laterally woven in, that perform like small leaf springs to keep the webbing flat. This results in better load spreading over the full width of the webbing. Polyester webbing also has a better force/elongation ratio, when compared to standard Polyamide (NYLON®) webbing, so it can convert more energy during an accident.

Application. This Schroth QuickFit 4-Point Blue Harness is designed to fit all 2005 to 2017 Mustangs with the factory seats and safety restraint system. Including the V6, EcoBoost, GT, Bullitt, BOSS, Shelby GT500 and Shelby GT350 models. Available individually or as a set of two. Please select from the options listed above.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 Details

What's in the Box
Driver Side Harness
  • (1) Left Belt
  • (1) Left Side Lap Belt Connector
  • (1) Left Side Tail Strap Connector
  • (2) Reduction Collar
  • (1) SCHROTH ASM Sticker
  • (1) SCHROTH Racing Sticker
Passenger Side Harness
  • (1) Right Belt
  • (1) Right Side Lap Belt Connector
  • (1) Right Side Tail Strap Connector
  • (2) Reduction Collar
  • (1) SCHROTH ASM Sticker
  • (1) SCHROTH Racing Sticker
Installation Info
Will it fit my Mustang?
  • GT - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • V6 - 05, 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17
  • GT500 - 07, 08, 09, 10, 11, 12, 13, 14
  • Bullitt - 08, 09
  • Boss 302 - 12, 13
  • EcoBoost - 15, 16, 17
  • GT350 - 15, 16, 17

People Who Bought This Item Also Bought

Most Helpful Reviews

5/5
Excellent Harness

Just installed this harness in my 2008 Shelby GT in preparation for my annual trip to Roebling Road Racetrack. Installation was easy (about 20 min), but you'll need a T50 Torque bit to remove the outboard ...

Read More
Helpful (1)

5/5
Race track ready!

I take my mustang down to car shows and the track and everyone absolutely loves the new seat belt harness for my mustang. Not hard at all to install follow instructions and can be done in less than 20 ...

Read More
Helpful (1)

Overall Rating 4.5 out of 5 stars
Read All 6 Reviews

Customer Photos (6) Submit Your Photo

View All 6 Photos

You Might Also Like

2 Questions / 2 Answers

Ask a Question

Can these seat belts be used with my existing Corbeau seat belt harness bar?

RobS

  • The Schroth QuickFit Harness is designed to be used with the factory rear seat buckles. A harness lock will allow you to secure the harness to bar, however, since these belts have a sewn-in intermediate buckle it may not allow certain harness locks to be used.

    AMJEFF

Helpful (1)

Can the SCHROTH QUICKFIT HARNESS accommodate individuals on heaver side?

RobS

  • Hello! Unfortunately the Schroth QuickFit Harness does not have a size rating, but it is fully adjustable.

    VincentV

Helpful (0)

More Products You Might Like

Customer Reviews (6) Write a Review

Overall Rating 4.5

out of 5 stars




  • 5/5

    November 26, 2016

    Excellent Harness

    Just installed this harness in my 2008 Shelby GT in preparation for my annual trip to Roebling Road Racetrack. Installation was easy (about 20 min), but you'll need a T50 Torque bit to remove the outboard side seatbelt anchors to install the 4 inch pigtails to the front and rear seatbelt anchor points. You will also need a torque wrench to tighten back to 30 ft/lbs per Ford Motor Co specs according to the dealer guide. I'll post up a full installation write up shortly for everyone since my box did not have any installation instructions. Re-installing when needed takes about 5 seconds! Highly suggest this addition if you track your vehicle at all. The two pigtails are well out of sight when not in use.

    AJ

    Year: 2008 Submodel: Other

    Helpful (1)

  • 5/5

    September 25, 2016

    Race track ready!

    I take my mustang down to car shows and the track and everyone absolutely loves the new seat belt harness for my mustang. Not hard at all to install follow instructions and can be done in less than 20 minutes. After installation you won't regret the investment for these harnesses for both seats. My mustang really has more of a track car appearance and feel after installing these harnesses.

    Mustangshark

    Year: 2014 Submodel: V6

    Helpful (1)

  • 5/5

    September 23, 2016

    Perfect fit!

    It really is as easy at looks. Literally open the box up and in no time at all you have a four point harness. Great quality straps and buckles. You will love it! Maybe not the price per side so much, but it's all in what you want! I say it's well worth it!

    Sloyote

    Year: 2011 Submodel: GT

    Helpful (1)

  • 5/5

    August 08, 2017

    QuickFit Harness

    Fits perfect in the car. Looks good and matches the other Blue accents I have added to the car. Best of all it holds you in place very well. Easy to install.

    toml047

    Year: 2016 Submodel: GT350

    Helpful (0)

  • 4/5

    June 22, 2017

    Great Price, Great Product

    Fits great on the 2017 Mustang. Only reason I gave it 4 stars instead of 5 is because the directions are missing some steps that only apply to 2015 Mustangs. You have to remove the rear driver side panel to get to the bolt for the lap belt. Just takes a little longer to install.

    Mattstang302

    Year: 2017 Submodel: GT

    Helpful (0)

  • 3/5

    May 23, 2017

    2013 GT

    The harness worked well at the track. Installation, not so well. 3 out of 4 connection points are no problem, the 4th is a problem. The ones for the back seats require the new belt to be bent and twisted. They are not made long enough to do easily do this and it is all trial and error. When buying a (bolt in) item it shouldn't require it to be put into a vise and bend it. They should make it longer and pre-bent.

    StevenG

    Year: 2013 Submodel: GT

    Helpful (0)

Related Mustang Categories