SEC10 Mustang Headlight Corner Protective Film 483255 (15-17 Mustang; 18-22 Mustang GT350, GT500)

Name: SEC10 Headlight Corner Protective Film (15-17 Mustang; 18-22 Mustang GT350, GT500)
Brand: SEC10
SKU: 483255
Price: 27.08 USD
Availability: InStock

Product Information

Features, Description, Q&A, Specs & Installation

Features

Headlight Corner Protective Film
Protects Against UV Damage, Rock Chips and Debris
Optically Clear with a Gloss Finish
Pre-Cut for Easy Installation
Made To Order - 2 Business Day Lead Time
Fits 2015-2017 Ford Mustang, 2018-2022 GT350 and GT500 Models

Description

Protective Film. SEC10's Clear Gloss Protective Film is the proactive solution to keeping your high-performance lights clear and damage-free. With this transparent film you create a barrier that shields your lights against UV damage, rock chips, and other road debris before they can cause harm.

Made To Order. SEC10's Light Protective Film is made to order for our customers with a 2 business day lead time.

Perfect Fit Guaranteed. SEC10 pre-cut vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

Installation Note. If your lights already show signs of cloudiness or scratches, it is recommended to perform a light restoration first, before installing SEC10's Protective Film for the best results.

Application. This SEC10 Headlight Corner Protective Film is designed to fit 2015-2017 Ford Mustang, 2018-2022 GT350 and GT500 models.

Please note that the transfer tape and the vinyl decal may be from different manufacturers.

SEC10 483255

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Installation & What's in the Box

Installation Info

Installation Time

(approx) 20 Minutes

Difficulty Level:

Simple installation for anyone.

Installation Guides

No guide available for this part yet.

What's in the Box

(1) Headlight Corner - Passenger Side
(1) Headlight Corner - Driver Side

Warranty

SEC10 offers our valued customers the following Limited Warranty on all SEC10 product purchased after September 1st, 2026.

What is Covered

Subject to the terms, exclusions and limitations herein, and with respect only to products first sold in the United States, SEC10 warrants that its products shall be free of manufacturing defects for three (3) years from the date of initial retail purchase when the SEC10 product is installed and used on purchaser's vehicle according to supplied product installation instructions and/or warnings. This Limited Warranty is made only with respect to the initial purchaser and is not transferrable. SEC10 reveserves the right to require proof of purchase as a condition of this Limited Warranty and to make future revisions to this product or its Limited Warranty without obligation to provide notice of same to purchaser or to conform existing product to future revisions. Any change to this warranty made after purchase may be applied retroactively at the sole discretion of SEC10.

What is Not Covered

Your SEC10 Limited Warranty does not cover damage or claims to any component, vehicle, or person other than the SEC10 product purchased. Your Limited Warranty is expressly limited to replacement of the item itself shall SEC10 determine item was not free of defect. As such, this Limited Warranty does not cover damage or claims to any component, vehicle, or person SEC10 determines to have been damaged by or subjected to:

Installation damage, collision damage, alteration, modification, misuse or failure to maintain.
Damage in any part attributable to:
1. vehicle systems or components or
2. combination with non- SEC10 products.
Normal wear and tear/product deterioration.
Theft, vandalism or other negligent or intentional damage.

Remedy Limited to Repair/Replacement:

The exclusive remedy provided for products covered under this Limited Warranty shall be, upon SEC10's inspection and at SEC10's option, either repair or replacement of product or parts (new or refurbished). Any parts repaired or replaced will be considered part of the original product and will not extend the term of Limited Warranty. Customers requesting warranty consideration should first contact the independent distributor selling your product to obtain a Returned Goods Authorization number. All removal, shipping, and installation costs are customer's responsibility. If a replacement part is needed before your part can be returned, you must first purchase the replacement part. Then, if SEC10 determines the part warrantable, you will be credited the purchase price of that part.

This warranty is the only warranty made in connection with the purchase of this product. SEC10 neither assumes nor authorizes any manufacturer, vendor, retailer, other person or entity to assume for it any other obligation or liability in connection with its products or this Limited Warranty.

Other Limitations - Exclusion of Damages - Your Rights Under State Law:

In consideration of the purchase price paid, neither SEC10 nor any independent distributor are responsible for any loss of use or time, rental costs, or for any incidental, consequential, punitive or other damages (whether arising in tort or contract) you may have or incur in connection with your vehicle, or your SEC10 product. Your exclusive remedy hereunder is repair/replacement of the item itself or refund as described above at SEC10's option. All implied warranties of merchantability and fitness for a particular purpose are hereby disclaimed or limited to the extent allowed under your jurisdiction.