Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!
Win Any MBRP XP Series Exhaust! Enter Daily

Steeda Strut Tower Brace (86-93 5.0L)

AmericanMuscle no longer carries the Steeda Strut Tower Brace (86-93 5.0L). Please check out 1979-1993 Foxbody Mustang Strut Tower Braces for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Reduces Chassis Flex.
  • Black Powdercoat Finish.
  • Super Strong 4130 Chromoly Steel Tubing.
  • Simple Bolt-On w/ Included Hardware.
  • Fits 1986-1993 GT Mustangs.
Reduce Body Flex. Chassis Flex is a big problem on the Fox Mustangs, that is why Steeda designed a Strut Tower Brace exclusively for the 1986-1993 GT Mustangs. This Strut Tower Brace will reduce unwanted body flex and is a must for all GT owners.

Quality Construction. Steeda Engineers crafted the GT Strut Tower Brace from super strong 4130 Chromoly steel tubing to keep your front end from flexing due to torque and finished it off with a classic Black Powdercoat finish for great looks and durability.

Simple Installation. Steeda designed the 86-93 GT Strut Tower Brace to be a simple bolt-on that clears the factory manifold and is easily installed with basic hand tools. Minor drilling is required.

Note: Coupon codes cannot be applied to this product.

Fitment: 1986 1987 1988 1989 1990 1991 1992 1993 Details

MPN# 555-5707

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
Hardware included:
  • (6) Six Nuts
  • (6) Six Bolts
  • (12) Twelve Washers
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (9) Submit Your Photo

View All 9 Photos

More Products You Might Like

Questions & Answers (3)

3 Top Rated Questions

I have a stock manifold with 1/2 bbk phenolic manifold spacer and 70mm throttle body and EGR. Also a MAC fenderwell CAI. Will this bar fit? Thanks guys.

  • The Steeda Strut Tower Brace is only confirmed to fit on the stock set-up as there are almost endless variations of different components that would change the fitment, that alter the position of the brace. Unfortunately, we cannot confirm the fitment for your specific set-up, we apologize.

Helpful (0)

Will this clear an MSD distributor? Will this clear an MSD distributor on a foxbody?

  • I have one and it will clear a Trick Flow intake, but you cannot have the regular length a/c line and the Steeda bar at the same time. Either you have to eliminate the a/c line that goes around the manifold or you must make a custom length a/c line in order to have both.

Helpful (0) Show 2 more answers

Will this brace work with the Edelbrock rpm II intake manifold?

  • After looking at a few of our customer photos, it appears that Steeda Strut Tower Brace (86-93 5.0L) should not have any issues fitting with the Edelbrock Intake Manifold. Unfortunately we have not tested this strut tower brace with the Edelbrock Intake Manifold and cannot guarantee it will fit.

Helpful (0)
Post Your Question

Recommended For You

Customer Reviews (13) Write a Review

Overall Rating 4.9

out of 5 stars

Installation Time:Less than 1 Hour

  • Handling Improvement 4.444445 4.4
  • Fit 4.625 4.6
  • Bang For Your Buck 4.666667 4.7

  • 5/5

    Installation Time: Less than 1 Hour

    December 07, 2017

    Steerable Strut Tower Brace..

    I recently acquired a 1992 Mustang GT. It is actually my 4th foxbody.. Considering the one in my possession now is a bit older and a bit more used, the first things/priorities that I am taking care of on my foxbody are reinforcing the weak areas or soon to be weak areas. Strut Towers, battle boxes, subframe connector, ect.. The Steerable Strut Tower Brace is highly recommended by me.. It took about 2 hours to install. Probably could have been quicker with the project if I hadn't done the install in the dark.. Lol. But it looks great, and I feel a noticeable difference in the front end handling!! Much more control. A must have for all foxbodys..


    Year: 1992 Submodel: GT

    Helpful (3)

  • 4/5

    Installation Time: Less than 1 Hour

    October 04, 2017

    Not Bolt-in with Maximum Motorports CC plates!

    The product itself is great, and good quality. What I DID NOT know, was this is not compatible with maximum Motorsports Caster/Camber Plates. I had to notch the brace to clear the passenger side plate. Not a show stopper, but it surely reduced the structural integrity of the strut tower brace. I guess I did not ask enough questions or do enough digging prior to purchase. If I had to do it over again, I would buy the M.M. brace to match/clear.


    Year: 1983 Submodel: Other

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    September 21, 2017

    A must for convertible

    Good quality product and fast shipping. Installation took another set of hands though as it wanted to sit too high on the firewall. After install the car feels much tighter. We're all after performance we can feel and this does just that.


    Year: 1989 Submodel: GT

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    February 10, 2017


    Fit great, definitely feel a difference in handling! Very happy!


    Year: 1988 Submodel: LX

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    March 29, 2016

    As advertised

    Seems like a good product. Was packaged nicely and arrived in good timing, considering free shipping. Thank AM!


    Year: 1990 Submodel: Other

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    May 27, 2014

    great modification!

    This strut tower brace looks great, fits perfect, and was an easy install. I made a plate for the back of the fire wall to increase rigidity in the thin sheet metal. Clears trick flow street burner intake manifold with ease.


    Year: 1991 Submodel: GT Binghamton, NY, USA

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    July 28, 2012

    Must have strut brace

    Unpacked with great quality welds, great finish,and no damage,all hardware to install,installed in less then one hour after drilling some holes. Added much needed support for cornering at the track and everyday driving, highly recommend for any fox body!


    Year: 1989 Submodel: GT Okc,ok

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    June 26, 2012




    Year: 1990 Submodel: Cobra NEWJERSEY

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    January 08, 2012


    Very good product for the Money , nicely made and the Powder Coating is excellent If you can do general automotive repairs like brake jobs and engine repair , you can install this Strut Tower Brace If you feel for any moment you can not Install this part , ( "STOP" and seek a professional installer )DONT DO IT If you mess this up and drill the holes WRONG to mount this part ,you will not be able to install this part on your car AND you may ruin the part and mess up your strut towers in the process I am a Retired Journeyman Auto Mechanic this part took Me about an hour to install and I measured everything several times to make sure it was perfect and I installed a 2 inch by 10 inch steel backing plate on the back side of the fire wall just to make the mounting area stiffer The STEEDA STRUT TOWER BRACE is made very well and the fitment is better than all the other ones I looked at . Troy Pleasant Hill California


    Year: 1988 Submodel: Other Pleasant Hill California

    Helpful (12)

  • 5/5

    May 14, 2011

    One of the best for the $

    Of all the parts I've bought over the past few years, this is still one of the best for the money. After 1 1/2 years, no complaints, and since changing intakes and nitrous plates, its very sad to have to remove it!


    Year: 1990 Submodel: GT

    Helpful (4)

  • 5/5

    December 03, 2010

    90 GT shock tower brace

    Seems to have really stiffened up the front end and it was easier to install then I had anticipated! The shape of it and the powdercoat black really spruced up the engine bay I think. The wire bundles that needed to be moved even look better in their new location!

    Blake Williamson

    Year: 1990 Submodel: GT

    Helpful (8)

  • 5/5

    May 28, 2010

    Steeda Fox Brace

    Well built from heavy duty tube, with a great black finish. Some places charge extra for shipping these things, here wtih free shipping it's a great price. A hint on installing- have a fresh drill bit and jack up each corner of the car as you need to get your hand into the underside of the wheel well.

    Greg Bishop

    Helpful (8)

  • 5/5

    December 27, 2009

    fox body strut tower bar

    I am in the proces of redtoring a 88 mustang and droppin a 351 in it. i am building on a budget and am constantly looking for parts that are good quality yet reasonably priced. this strut tower brace is a great adition. it made night and day differance in handling, and was a breeze to instal. just a note for potential buyers, it fits perfectly around my explorer intake. i plan on continuing to use American Muscle as my project gets closer to comletion, and i suggest this brace to anyone lookin to increase handling and regidity in their stang.


    Year: 1988

    Helpful (8)

Related Mustang Categories