Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!

Steeda Adjustable Motor Mounts (15-19 EcoBoost)

AmericanMuscle no longer carries the Steeda Adjustable Motor Mounts (15-19 EcoBoost). Please check out 2015-2019 Mustang Motor Mounts for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Minimize Vibration and Drive Line Movement
  • Adjustable Height - Perfect for Clearance Issues
  • High Quality Billet Aluminum Construction
  • Polyurethane Bushings
  • Includes Two Sets of Bushings - Red for Street, Black for Competition
  • Made in the USA
  • Fits 2015-2019 EcoBoost Mustangs
Minimize Vibration. The stock S550 EcoBoost motor mounts use natural rubber bushings that deteriorate and soften over time causing sloppy engine and drive line movement, but Steeda Heavy Duty Motor Mounts use high grade polyurethane bushings to reduce driveline movement with minimum vibration and will last years longer than rubber.

Adjustable. Steeda designed their Motor Mounts to be adjustable in 1/4" increments. They can be installed at the stock height or up to 3/4 of an inch lower to help alleviate clearance issues from aftermarket intakes and strut tower braces.

Red or Black. Steeda includes two different durometer bushings with their Motor Mount Kits. The red bushings add great control with only minimal increase in engine/transmission vibration - ideal for the daily driver. The black bushings are harder for maximum control, but will significantly increase engine/transmission vibration - highly recommended for competition use only.

Superior Materials And Quality. Manufactured in the USA from high grade aerospace grade billet aluminum and industrial grade polyurethane for superior durability, these Steeda Heavy Duty Mustang Motor Mounts are much lighter and stronger than their stock rubber and steel counterparts to give you years of trouble free driving performance.

Application. This set of two Steeda Heavy Duty Adjustable Motor Mounts are specifically designed to fit the 2015-2019 EcoBoost Mustangs equipped with the turbocharged 2.3L Inline 4-cylinder engine.

Note: Coupon codes cannot be applied to this product.

Fitment: 2015 2016 2017 2018 2019 Details

MPN# 555-4038

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (2) Adjustable Motor Mounts
  • (2) Red Bushings - street use
  • (2) Black Bushings - competition use
  • Installation Instructions
Installation Info
Will it fit my Mustang?

You Might Also Like

Customer Photos

More Products You Might Like

Q & A

No questions about this product yet.

Ask the First Question

Recommended For You

Customer Reviews (2) Write a Review

Overall Rating 5

out of 5 stars

Installation Time:Afternoon

  • Handling Improvement 4 4
  • Fit 5 5
  • Bang For Your Buck 5 5

  • 5/5

    Installation Time: Afternoon

    September 18, 2018

    These should be installed at the factory.

    Removing the original mounts will consume most of the time since they are huge and a lot of stuff will be in the way. Steeda mounts were easy to install, just don't forget to tape them together as per their instructions. At first they (all red) will let quite a bit of engine noise in the cabin, but that will go away as they break in. If you have any rattles in your dashboard, these will motivate you to fix them asap. If you have issues with rough shifting on your manual transmission, these should get rid of it, or most of it, assuming the mt is in good condition. Have a quality set of ratcheting wrenches since you'll be working in cramped quarter turning 6 long bolts 2-3 clicks at a time with low quality ones (mount bolts).


    Year: 2015 Submodel: EcoBoost

    Helpful (1)

  • 5/5

    Installation Time: Afternoon

    January 26, 2016

    Only name in the game, Steeda

    I bought these to tighten up the drivetrain to get better power transfer while on the brake at the track. The teardown can be a real pain but follow the instructions and take the factory motor-to-mount brackets off. You will waste time, effort, and knuckle skin trying to fish the massive stock mounts out with the brackets on. The Steeda pieces are of typical Steeda high quality. I chose the black bushings for my strip/street setup. They increased the vibration a ton until they broke in a bit. Now they are bearable. I assume the red pucks would be much more forgiving. Actual install of the mounts took about 30 minutes once the old stuff is out. The 3/4 makes tons of clearance with the strut brace and gave me some room for the PTE 5558 to breathe a bit!


    Year: 2015 Submodel: Ecoboost Oklahoma City, OK

    Helpful (5)

Related Mustang Categories