Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!

Steeda Camber Plates (15-19 All)

AmericanMuscle no longer carries the Steeda Camber Plates (15-19 All). Please check out 2015-2019 Mustang Caster Camber Plates for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Improves Handling Performance
  • Reduces Uneven Tire Wear
  • Ideal for Lowered Mustangs
  • -0.3 Degrees to -2.8 Degrees of Camber Adjustment
  • High Quality Stainless Steel Construction
  • Teflon-lined Bearings
  • Grade 10.9 Hardware and Nylock Nuts Included
  • Made in the USA
  • Simple Bolt-On Installation
  • Lifetime Manufacture Warranty
  • Fits all 2015-2019 Ford Mustang Models
Perfect Alignment. Correct tire alignment is critical for proper handling and even tire wear. Steeda's Camber Plates will allow you to fine tune your Mustangs front end geometry to prevent premature tire wear while improving steering response - turning your S550 Mustang into a real corner carver. In testing, Steeda has seen maximum lateral acceleration increases of up to .11 G's.

Adjustable Camber. Steeda Camber Plates have the largest range of adjustment on the market today. So you (or your shop) can adjust the camber angle from -0.3 degrees to -2.8 degrees to precisely dial in your S550 Mustang's front suspension for balanced and predictable handling. Please note that Steeda's Camber Plates do not include any caster adjustment. This is because Ford has already given the S550 Mustang 7 degrees of caster from the factory.

Ideal for Lowered Mustangs. If you have lowered your S550 Mustang, you may not be able to get your suspension geometry back into check, resulting in accelerated tire wear and less-than-stellar handling. But a set of Steeda Camber Plates will give you the adjustability you need to get your dropped Mustang back in spec.

Premium Quality. Manufactured in the USA from the highest quality stainless steel available for superior strength, these Steeda Camber Plates are Tig-welded and CNC machined to exact tolerances. Steeda's Camber Plates feature nickel-plated bearing housings with TeflonĀ® lined bearings for excellent performance. Steeda even includes Grade 10.9 hardware and nylock nuts for installation.

Direct Bolt-on Installation. Steeda designed their Camber Plates to be a direct bolt-on upgrade for the S550 Mustang. Using basic hand tools, these Camber Plates can be install in about 3-4 hours with no modifications required. Please note that an alignment is highly recommended after installation.

Limited Lifetime Warranty. Steeda warrants their Camber Plates to be free from defects in workmanship and materials with a Limited Lifetime Warranty. Some exclusions may apply, please see manufacturer warranty for full details.

Application. These Steeda Camber Plates are a direct bolt-on upgrade replacement for all 2015-2019 Mustangs, including the V6, EcoBoost, GT and Shelby GT350 models. Sold as a pair.

Application Note. Steeda's S550 Mustang Camber Plates are compatible with KW Suspension V3 Coliover Kits.

Note: Coupon codes cannot be applied to this product.

Fitment: 2015 2016 2017 2018 2019 Details

MPN# 555-8139

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (2) Camber Plates
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos

More Products You Might Like

Questions & Answers (1)

1 Top Rated Question

Doest it work with MagnaRide on the 2018 Mustang GT?

  • These Steeda Camber Plates are a direct bolt-on upgrade replacement for all 2015-2019 Mustangs, including the V6, EcoBoost, GT and Shelby GT350 models, even those equipped with Magneride.

Helpful (1)
Post Your Question

Recommended For You

Customer Reviews (6) Write a Review

Overall Rating 4.7

out of 5 stars

Installation Time:Afternoon

  • Handling Improvement 4.2 4.2
  • Fit 4.8 4.8
  • Bang For Your Buck 4.4 4.4

  • 5/5

    Installation Time: Afternoon

    October 18, 2017

    Works as advertised

    Installed with Ford Racing X springs and used for autocross. Provides needed adjustment to increase negative camber for event days. Easy to use. Well made product.


    Year: 2017 Submodel: GT

    Helpful (6)

  • 5/5

    Installation Time: Afternoon

    August 28, 2017

    Steeds camber plates

    The plate install was a breeze, the hardware was included along with all needed instructions. Great product.


    Year: 2017 Submodel: GT

    Helpful (8)

  • 3/5

    Installation Time: Afternoon

    June 29, 2017

    Easy install

    Relatively easy to install about 1 1/2 hr each torque all bolts to spec, don't like the popping noise they make when turning a corner. Didn't make it before install


    Year: 2015 Submodel: GT

    Helpful (9)

  • 5/5

    August 02, 2016

    Great product.

    Steeda is the way to go. with their product. you always get what you paid for. these plates will be installed soon and know for sure they will make the alignment easier.


    Year: 2015 Submodel: GT

    Helpful (6)

  • 5/5

    Installation Time: Afternoon

    February 24, 2016

    Great product!

    Installs easily in about two hours and make alignment changes simple.


    Year: 2016 Submodel: GT

    Helpful (6)

  • 5/5

    Installation Time: Afternoon

    February 11, 2016

    2015 GT camber kit

    Was easy to install. I lowered my car 2" so I had a serious neg camber on the fronts. Was able to restore the factory angle. Rides great.


    Year: 2015 Submodel: GT Los Angeles CA

    Helpful (9)

Related Mustang Categories