Increases in Horsepower and Torque.
Experience dyno proven gains of HP and TQ at the rear wheels of your S550 GT Mustang with Steeda ProFlow Cold Air Intake installed. This Steeda ProFlow Cold Air Intake replaces your Coyote powered Mustang's restrictive factory air box, intake tube and paper filter element for impressive increases in both power and throttle response that you can feel in the seat of your pants. A custom tune is required for operation.Unique Design.
Steeda engineered their intake to retain the factory cold air ducting from the front grille for optimal air flow. A soft, durable rubber gasket is included to seal the Steeda air box tight against the hood. This prevents hot air from entering the intake for noticeably lower intake temperatures. The ProFlow intake tube features a provision to retain the factory sound tube, but also includes a block off cap for those looking to delete it entirely.CNC Mass Air Housing.
This ProFlow Cold Air Intake features a precision CNC machined mass air housing that provides the cleanest mass air signal available on the market. A clean MAF signal results in smooth, reliable off-throttle to on-throttle response. Includes housing only, MAF sensor is not included.Reusable Nanofiber Air Filter.
Included with this Proflow Cold Air Intake is a high flow reusable nanofiber air filter, that provides excellent filtration of harmful power robbing dust particles. Seeing that the filter is reusable, there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.Made in the USA.
Manufactured in the USA from roto-molded high quality ABS plastic for outstanding durability and heat insulation, this ProFlow Cold Air Intake Tube provides smooth unrestricted airflow. The exterior of the intake tube features a fine satin texture finish that adds an intimidating appearance to your GT's engine bay.Straight Forward Installation.
The Steeda ProFlow Cold Air Intake Kit is designed to install easily with just basic hand tools. No extra modifications or special tools are required for proper installation. All necessary parts and instructions are included.Required Upgrade.
Installation of this Steeda ProFlow Cold Air Intake will require a custom tune for operation. AmericanMuscle recommends a Bama Custom Tune with a Mustang Handheld Tuner
to reprogram the vehicles computer (ECU). Application.
This Steeda ProFlow Cold Air Intake System is specifically designed to fit the 2015-2017 GT Mustangs equipped with the 5.0L Coyote V8 engine and requires re-tuning of the vehicles computer for operation.
Technical Note. This Cold Air Intake is not legal for use in California or any other states adopting California emission standards. Intended for off-road, track use only.