Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!

Steeda Strut Tower Brace (05-14 V6)

AmericanMuscle no longer carries the Steeda Strut Tower Brace (05-14 V6). Please check out 2005-2009 Mustang Strut & Shock Tower Braces for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Improves Handling
  • Eliminates Suspension Flex
  • Chromoly Steel
  • Black Powdercoat Finish
  • Fits 2005-2014 Mustang V6
Improve Handling. Reduce chassis flex and improve handling with a Steeda strut tower brace for your S197 V6 Mustang. This must-have mod reinforces your Mustang's front end to dramatically reduce body roll. Dive into even the tightest corners with more confidence once you bolt on a Steeda Strut Tower brace.

Steeda Style. This sporty bar also adds some Steeda style to your engine bay with a Steeda lettering cut-out in the center of the brace.

Built to Perform. This race-tested tubular design is made from 4130 chromoly steel for unsurpassed durability and strength. The Steeda strut tower brace is finished with a textured black powdercoat.

Simple Installation. Installation takes less than 30 minutes and requires no modifications.

Application. This Steeda Strut Tower Brace is designed to fit the 2005 to 2014 Mustang V6s.

Note: Coupon codes cannot be applied to this product.

Technical Notes. GT model brace pictured. V6 model may vary. Will not work with aftermarket intake manifold covers.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (1) Strut Tower Brace
Installation Info
Tech Specs
Will it fit my Mustang?

You Might Also Like

Customer Photos (16) Submit Your Photo

View All 16 Photos

More Products You Might Like

Questions & Answers (3)

3 Top Rated Questions

Hi, I just installed the Steeda struts with the Steeda heavy duty strut mounts. The studs on the Steeda strut mounts are bigger than stock. Are the holes in the brace big enough to fit the bigger studs.

  • The Steeda Strut Tower Brace utilizes holes in that will have adequate clearance for stock or steeda strut mount/camber plate studs.

Helpful (0)

Will this work with a 2014 GT, not C6?

  • This Steeda Strut Tower Brace is designed to fit the 2005 to 2014 Mustang V6s only and will not work with the GT models. We do have the Ford brace which is similar to the Steeda one and will fit your car.

Helpful (0)

Will this fit on or over a 4.0 X-charger and under a stock hood

  • Unfortunately we have not tested the Steeda Strut Tower Brace (05-14 V6) with the X-Charger for the 4.0 V6 Mustang. By taking a look at some of the customer photos I see some customers were able to make this work with bigger intake manifolds and other applications. This brace may work for you but I cannot guarantee it.

Helpful (0)
Post Your Question

People Who Bought This Item Also Bought

Customer Reviews (23) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Less than 1 Hour

  • Handling Improvement 4.375 4.4
  • Fit 4.875 4.9
  • Bang For Your Buck 4.8125 4.8

  • 5/5

    Installation Time: Less than 1 Hour

    May 28, 2018

    Steeda strut tower brace

    Perfect fit on my '07. No alterations needed. Very pleased with AM on this purchase.


    Year: 2007 Submodel: V6

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    January 23, 2018

    Steeda tower brace

    Fits great, doesn't rub the intake. stabilizes the rear end. I have a 2006 base Mustang with no rear sway bar, rear end was sloppy, now it holds tight.


    Year: 2008 Submodel: V6

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    January 13, 2018

    Fits 2011 GT Boss 302

    Bolts on in 30mins fits BOSS 302 intake manifold with 1” to spare


    Year: 2011 Submodel: GT

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    October 12, 2017

    Squeaks gone!

    Great product. My car would sometimes twist going over speed bumps, with this product the twist was completely gone.


    Year: 2005 Submodel: V6

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    September 07, 2017

    !!!!Will fit BOSS Manifold on 5.0!!!!

    Bought this with the hope that it would clear the Boss Intake Manifold on my 2013 GT, and it fits perfect! easy install no clearance issue, and looks much better than the factory Boss Brace.


    Year: 2013 Submodel: GT

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    July 04, 2017

    A perfect fit

    I had purchased a similar looking brace, which was much cheaper, but did not fit. This one was a bit pricier, but fit so perfectly that even I was able to install it easily, with one socket wrench, in about 15 minutes. It definitely stiffens up the front half of the car. A great deal, and a certain upgrade for any mustangs out there...


    Year: 2006 Submodel: V6

    Helpful (3)

  • 5/5

    Installation Time: Less than 1 Hour

    February 13, 2017

    Steeda Strut Tower Brace V6

    This brace fits great. I had bought another brand from another site that was made for a gt. That brace rubbed a plug and the top of my air intake. This brace does not rub at all.


    Year: 2008 Submodel: V6

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    November 09, 2016

    The Steeda Strut Bar

    It's been a very nice product. It's kept the body from rolling too much it helps a lot. It's also a little nice look under the hood.


    Year: 2012 Submodel: V6

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    May 25, 2014

    Strut brace

    Quality and fit are perfect. Using an air ratchet the installation took just minutes.


    Year: 2006 Submodel: V6 Beautiful upstate western NY

    Helpful (5)

  • 4/5

    Installation Time: Less than 1 Hour

    April 02, 2014

    Steeda Strut Tower Brace

    Well made product with good quality finish. One bolt hole had to be elongated to make it fit. Easy modification to improve handling. Installed it on a 2012 Mustang which did handle better but the improvement wasn't as noticeable as the 05-09 models since the front suspension has been improved. Still a good value compared to other handling upgrades.


    Year: 2009 Submodel: GT Houston, Texas USA

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    January 02, 2014

    Love it

    give your engine bay an awesome look the tightens your steering with less body roll super easy to install.


    Year: 2011 Submodel: V6 Wyoming, USA

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    October 01, 2013

    Well made part, easy install

    This could not have been an easier or quicker install, maybe ten minutes including putting the tools away. Under very hard cornering, the nose feels a little better planted than before, but in everyday driving it's not a night and day difference. The fit and finish is very good, and it makes the engine bay look "complete" with the hood open.


    Year: 2008 Submodel: V6 Hernando, FL, USA

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    July 24, 2013

    Incredibly easy to install and works great

    Installation was so easy and fast. The strut tower nuts came off and on easy with some PB Blaster. The bar went right on (had a lot of problems with brothers '08 Focus and Steeda bar). Immediately noticed a difference around street corners and down the interstate.


    Year: 2008 Submodel: V6 New Jersey, USA

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    August 23, 2012

    Surprising improvement

    I really didn't expect much improvement with the strut tower brace but was pleasantly surprised to feel the diffference. First let me explain I haven't installed my after-market sway bars yet. I've installed Eibach Pro lowering springs and Tokico D-Spec adjustable struts/shocks and yes I can really feel the difference, not huge but noticeable. I imagine if I would have waited until after I installed my new Eibach F+R sway bars, I might not have been able to notice as much. That project is for the weekend, I did this in about 30 minutes after work. The holes line up perfect and no need to go out and buy or scrounge up some washers because the holes are the right size. It was litterally take 4 nuts off, put strut brace on, put 4 nuts on and done. The extra time was to install the little decorative "Steeda" plate on the top of the bar and clean off some goo that was on it. The other nice thing is it complements the engine compartment perfectly! It doesn't look like some gaudy over the top piece that wasn't supposed to be there, it looks like it should have been there. One thing, the instructions had a mention for 2010+ Mustangs to do something with a canister mount. My 2010 V6 Premium Pony package automatic didn't have that so I just ignored it. The hood shuts very easy. I was worried about there being binding or how much pressure I'd have to apply to get the hood to go down. At the same time, the struts provide great lift. BYE BYE Prop bar! As always finding the part on American Muscle was super easy and the selection is great, I love the web site, I always come here first. Shipping was super fast, 1 day for me living pretty close.


    Year: 2010 Submodel: V6 Maryland

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    February 02, 2012

    Strut Tower Brace

    Easiest, cost effective, suspension pc. that works and looks good!


    Year: 2012 Submodel: V6 Maple Park,Il.

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    December 08, 2011

    Super easy to install - Looks bad - great feel

    Steeda rules so the look is killer. Handling somewhat better but you wont feel night and day after installing it. Couldnt be easier to put the brace on. Glad I got it and recommend it to anyone!


    Year: 2009 Submodel: V6 Northern Va

    Helpful (6)

  • 5/5

    June 28, 2011


    Shipped and Arrived quickly. Noticed that it corners better and feels different than before. It does fit V6 models fine, its a bit close to the intake manifold but clears just fine.


    Year: 2005 Submodel: V6

    Helpful (3)

  • 5/5

    July 08, 2010

    very pleased

    super easy to install, noticed a difference in ride, no clearance issues...

    John G.

    Helpful (8)

  • 5/5

    April 05, 2010

    Could go either way

    If you're thinking of purchasing this part solely for performance and chassis stiffening, don't. You can use this money for something that will do the job better (control arms, sway bars, etc.) However, if you want something to dress up the engine a little bit and is actually functional, this is a good quality part that won't disappoint. American Muscle is also top-notch with their customer service, shipping, and product condition.


    Helpful (7)

  • 2/5

    January 02, 2010

    Doesn't Work with.....

    Its a great product welll constructed. buttttt it doesen't work with the v6 intake manifold cover aand i would like to let everyone know because i found out the hard way

    upset person

    Helpful (10)

Related Mustang Categories