(approx) 30 Minutes
Light to Moderate mechanical skill required.
$26.99 (each)FREE Shipping on orders over $49
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
November 13, 2019
Very easy to install. Hooked these up to front parking lights from underneath the hood.Helpful (0)
May 10, 2019
LED Flex lights are GREAT.
Easy to install, can be cut to fit any area. I actually placed them under my radiator cover so it shines down and lights the back side of my grill. Great productHelpful (0)
March 11, 2019
It will brighten up your night and have you looking right. You are no longer hard to find!Helpful (0)
February 16, 2019
I installed this light in my trunk under my Shelby rear shock brace. Looks awesome lighting up the Shelby name and gives a lot more light to the trunkHelpful (2)
December 06, 2018
This install was quite the adventure!!! Redrum (my car) and I couldn't be happier with the results.Helpful (4)
November 29, 2018
I love them. My Mustang looks mean going down the street since I have it all blacked out. Thank you.Helpful (3)
November 20, 2018
Easy to install turned out better than I thought it wouldHelpful (3)
October 03, 2018
Looks great! Really shows off the car!
Easy installation, tucked up under bottom rail of doors. Gives a nice glow.Helpful (4)
September 28, 2018
Hello there. Can anyone tell me what wires i would need to splice into? Want the hooked up so when the doors open they come on and go off when door closes. 2005 mustang gtHelpful (41)
August 26, 2018
Love them. My car looks fantastic. I have had many complements on the lights. My father said it took him about 30 minutes to install. Connected them to sidemarker lights.Helpful (5)
Does the lights come for both sides for the car or do they come seperate payments both sides? Because I want to buy the lights but not sure if I have to by two the left side and right side of the car?.
The Flexible LED Strip 36 in. - Red (79-17 All) comes with one 36" strip for $24.99. To have two strips(one for each side of the car) you will have to purchase a quantity of 2.
What is the candela per sq. inch reading on these lights? Asking because state laws in CA only allow 0.05 candela/sq. inch. for exterior underglow lights.
The Axial Flexible LED Strip utilizes a 3528 SMD LED Chip, which produces 8.5 lumens of light. Since candela's are measured using the apex angle of the light, it would be difficult to determine how many candela's the lights produce as it changes from the angle which you are measuring light from.
2012 V6 - I'm no electrician. Ordered received the 36' LED white. I am going to mount one strip on each side underneath as running board lights. I only want them to come on when I open the door and stay on with (and go off with) the parking/tailights that stay on monetarily when you get out of the car. What do I wire to or how do I accomplish this? (New Mustang owner ... well new used Mustang owner)
The wire would need to be installed into a power source that receives current when the doors open. Many of the interior lights illuminate when the doors open, so almost any of those components can be used as a power source. If wiring is not something you feel comfortable with, we would highly recommend taking the lights to a shop to ensure that your electrical components do not short or cause any hazards.
Hi, I’ve already installed the footwell lighting kit so it turns on and off when I open the doors, could I also install this kit on the same power source without having any electric issues? Thanks.
Depending on what other lighting/electrical components you have installed, electrical issues may occur.
How would I install these on a 1998 Mustang?
These are held on by 3m tape and will be a universal fitment. Installing would be up to you on where you want them to be.
Multiple of the Axial Flexible LED Strip 36 in. can be spliced together in a series or parallel circuit. Though, whenever wiring multiple loads together, we suggest taking it to a shop to ensure everything is done properly so no issues occur.
The Axial Flexible LED Strip will need to be spliced in to a electrical source which can easily be controlled by a switch if you want.
If the Axial Flexible LED Strip 36 in is mounted to a fiberglass hood, heat transfer should not damage the LED's, though it may slightly decrease their lifespan. If using a metal hood, more heat transfer can occur, which may cause the LED's to fail prematurely.
You will need to check with your local law regulations to see when you are able to properly use the Axial Flexible LED Strip 36 inch in Blue.We do apologize as each county and state will have different regulations for the usage of lighting on vehicles.
These can be custom wired to a switch, or spliced into the factory headlight switch. However, since this is a universal product, there is not a specific installation guide on how to do this.
Hello! 3M makes awesome adhesive products. While I am fairly confident that you would be okay with using the supplied tape, if you insist on something different I would recommend sticking with 3M and perhaps considering a stronger hold automotive tape. However, I do believe the included tape is plenty strong enough.
It is not recommended to install the Axial Flexible LED Strip 36 in. in the engine bay, as the adhesive backing is not meant for the heat, and the heat of the engine bay could damage the LED chips and Circuitry.
The Axial Flexible LED Strip will attach to anywhere you choose using the adhesive backing. Once installed this can be wired to any 12v source, be it factory entry lighting, or a separate switch. This allows you the ability to customize when the lights come on.
The Axial Flexible LED Strip 36 in are designed to work as an on/off operation, however, if you add a dim switch, or a switch that is able to regulate current before getting to the lights, it would certainly dim the lights.
For the Flexible LED Strip 36 in. - Blue (79-17 All) this would depend on how you wire the LED lights up to your car. You can wire them up for key on which would only be on when the car is turned on.
(approx) 30 Minutes
Light to Moderate mechanical skill required.
What's in the Box