(approx) 15 Minutes
Simple installation for anyone.
$60.63 (each)FREE Shipping
Justin from AmericanMuscle.com, we're here with Chris Thompson from Airaid. He stopped by the shop to tell us a little more about these great Airaid products. We're very familiar with Airaid; we use them on our project cars with great success. Chris, what can you tell us about Airaid that makes it so unique? "Everything we do is digitally designed. It's engineered to fit, it's engineered to work, it's engineered to work without any special tuning. Now, tuning is much, much better. You guys offer a lot of great choices in aftermarket tuning. It'll only enhance the performance of the Mustang. We design our intakes so there's no special gluing required, there's no cutting or hacking of the engine required. If somebody decided to put a stock intake back on, they don't have to go back to Ford to buy another part to put the piece back on. Every intake we do is digitally designed. It's all about the design of the airflow and the linear charge to the throttle body. We use the rotational molding not so much for the heat soaking, but for the shape of the tube we can come up with. By using the rotational molding, it allows us to really give the right shape and form to make sure the product works well." We're very excited—we've got our 2013 Mustang here, probably not even 10 miles on this thing yet, and we already have an Airaid intake on it. Tell us a little more about that. "This is awesome. We're really excited to be here today. This is the first Airaid intake on a 2013 Mustang. We're really excited to be here with you guys. As you can see it fits. We know for sure it fits. We believe we have a hit. We'll do a little bit more testing on it before we release it to the public, but that should happen anytime now." Now, you were telling me earlier, you're working with some legends in the Mustang world. "Well, we're excited about working with Parnelli Jones and his son PJ. Parnelli's been instrumental in helping us come along with the Boss 302 intakes we're trying to develop. Nobody knows the heritage of the Boss 302 better than Parnelli Jones. We worked with PJ on the side by side utility vehicles (Razors, Rhinos, and TRX's). We also sponsored him in the past on his endeavors in the American Le Mans Series, which he ran last year." Chris, thank you so much for educating us on your great Airaid products. And as always, you can find those great Airaid products right here at AmericanMuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Note: Coupon codes cannot be applied to this product.
Fitment: 2011 2012 2013 2014 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
August 30, 2019
Replaces Roush CAI
Replaced my Roush CAI for my V6 Mustang with this and it fits perfectly as far as I can tell. No issues with it so far. The only difference between it and the Roush air filter was the logo.Helpful (0)
June 30, 2019
Neglected my initial filter (shame on me, I know) so I swooped up this replacement while I deep clean the original — wow! I almost forgot how incredible this setup makes the car sound. Dropped it in, and took the car for a spin - instantly heard that turbo-esque noise that I’ve been missing for months with ever push of the gas pedal. Satisfying and simple to install. Ask great to having a second one to swap in while you’re cleaning the dirty one.Helpful (0)
February 07, 2019
It's ah filter
It's pretty and cleans air and lasts quite a long time...ya!Helpful (3)
January 07, 2019
Very good filter
I bought this as a second filter to rotate filters on my cold air intake. I works well and fits perfectly on my Airaid Cold Air Intake. It does the job as well as the original filter. I would recommend this filter to anyone looking for a replacement or as a 2nd spare one.Helpful (4)
November 30, 2018
This filter is just like the one that came with the kit. It's great having two so I can just put a clean one on, wash the dirty one and set it aside to dry for the next time.Helpful (4)
November 26, 2018
I bought this filter as a replacement for my first Airaid filter which lasted me 45,000 miles, with the required maintenance of cleaning the filter every oil change or so. Very good purchase in my opinion.Helpful (4)
October 03, 2018
Great Filter, does the job!
The Air aid Cold Air Intake filter is great. Does the job and gives your Mustang a great sound to boot!Helpful (4)
September 27, 2018
sounds alot better
switched out the dirty air intake to new one after buying the car and it sounds and performes much better cleanHelpful (4)
April 10, 2018
Thank you AM for sending me the filter. It was super easy to install, had no troubles at all.Helpful (7)
March 21, 2018
Great replacement for CAI filter
Helps to have one while the other is being cleaned and oiledHelpful (7)
What are the dimensions for this filter? Is 8in X 4in ?
Dimensions are: Flange Inside Diameter: 4 in., Base Outside Diameter: 5.94 in., Top Outside Diameter: 4.625 in., Height: 7 in.
Will I have to purchase the air aid tube or will it fit with the stock tube?
This filter will only work with the Airaid MXP Series Cold Air Intake w/ SynthaFlow Oiled Filter which can be found here: https://www.americanmuscle.com/Airaid-Cold-Air-2011v6.html
Will this filter fit a Roush CAI for a 2014 V6 Mustang?
This filter is a designated replacement for the Airaid MXP Series Cold Air Intake.
will this fit on an air aid modular intake tube or am i just restricted to using stock airbox and drop in filter?
The Airaid Modular Intake Tube will not allow the pairing of this Airaid intake filter. The Modular Tube is only intended for use with the factory air box.
Will this work as a replacement for the roush air instake?
The Airaid Cold Air Intake Replacement Filter - Synthaflow (11-14 V6) will not fit on a Roush intake. This filter designed to be a direct fit replacement for the 2011-2014 V6 Mustangs with Airaid Cold Air Intake part number 450-265 installed.
So long as the opening on your tube matches the opening for this Filter and it will fit in your box or within the space you have then it should work fine. i believe this one is a 4in opening if im not mistaken.
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box