Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

SpeedForm Rear Window Louvers - Smooth Aluminum (94-04 Coupe)

$0.00
Market Price $368.99 You Save 12% ($44.00)
Our Price

$324.99

FREE Shipping

  • Item 75007

Will this fit your Vehicle?

Change Vehicle Help?
In Stock Ships same business day.
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Great Retro Styling
    • Matte Black Finish
    • Aluminum Construction
    • Lift-Off 2-Piece Design
    • Paint-Able
    • Fit All 1994 to 2004 Coupes

    Review & Installation Video

    Review & Install Video

    Hey this is Justin from AmericanMuscle.com and I’m breaking down this aluminum rear window louver fitting all 99-04 Mustangs. Window louvers are one of those love it or hate it type of mods that originated back in the 60’s or 70’s muscle car era, and can still be found on a lot of today’s muscle cars. Taking a closer look at the louver itself you’ll notice a lightweight but extremely durable aluminum construction, which has been finished off with a matte black paint job which looks great as is, or you can paint it to match your ride for a totally unique look. Some people may be worried about hurting their visibility when installing a part like this and honestly it’s a valid concern. However since the louver has been contoured perfectly to the shape of your rear window, as you can see here on our 2000 V6, this is actually one of the better louver options in retaining your overall visibility, in fact as you can see it’s pretty good. Another great feature with this louver option is that it features a unique lift-off design, making it a lot easier to remove the louver itself whenever it comes time to clean the rear window. The unique lift-off design is made possible thanks to the six included tie down plates, that secure the louver itself to the rear window. You’ll also receive three additional splints, two for the sides one for the center, that add a little extra strength to help keep the louver from flapping around at highway speeds. Because of the two piece design, and the inclusion of the side and center splints, getting the louver installed should take you about an hour from start to finish. When adhering the six tie down plates to your rear window, it is very important that you let them sit for at least 24 hours before attaching the louver itself. This is just to ensure the 3M tape has had enough time to form a very secure bond. So if you’re one of those Mustang owners out there that absolutely love the vibe that a rear window louver can give you, then be sure to check out this matte black louver option for your 99-04 Mustang, available right here at AmericanMuscle.com

    Aggressive Styling. Complete the aggressive styling of your SN95 Mustang with these high quality aluminum rear window louvers from SpeedForm. Rear window louvers were all the rage in the Muscle car scene of the 60's & 70's and now you can have the same styling for your modern pony.

    Paint-able Matte Black Finish. Completed in an aggressive matte black finish these high quality aluminum rear window louvers can be installed as is, or be painted to match your Mustangs exterior.

    Lift-off Design. These SpeedForm Matte Black Aluminum Rear Window Louvers will give your modern Pony classic muscle car styling and with its lift off design, you can still keep your back window clean.

    Application. These SpeedForm Aluminum Rear Window Louvers are designed to fit all 1994 to 2004 Ford Mustang coupes including the V6, GT, Bullitt, Mach 1, and SVT Cobra.

    SpeedForm

    Fitment: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Details

    MPN# 75007

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    Hardware included:
    • (1) Aluminum Louver (2 piece)
    • (6) Tie down plates
    • (1) Center splint w/ foam
    • (2) Side splints
    Installation Info
    Tech Specs
    Specifications:
    • Material: Aluminum
    • Finish: Matte
    • Color: Black
    • Requires Painting: No
    • Paintable: Yes
    • Hinged: No
    Will it fit my Mustang?
    • Bullitt - 01
    • Cobra - 94, 95, 96, 97, 98, 99, 00, 01, 03, 04
    • Cobra R - 95, 00
    • GT - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04
    • Mach 1 - 03, 04
    • V6 - 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04

      Customer Photos (31) Submit Your Photo

      View All 31 Photos

        Questions & Answers (2)

        2 Top Rated Questions

        How easy is it to clean the window underneath?

        • The SpeedForm Aluminum Rear Window Louver will have to be removed to clean the window with ease.

        Helpful (0)

        Is there any way to just buy the mounts?

        • You can buy the mounting hardware for the Rear Window Louvers - Smooth Aluminum (94-04 All). Just give us a call in to order these. http://www.americanmuscle.com/contact.html

        Helpful (0)
        Post Your Question

          Customer Reviews (28) Write a Review

          Overall Rating 3.9

          out of 5 stars

          Installation Time:Afternoon

          • Fit 3.304348 3.3
          • Appearance 4.217391 4.2
          • Bang For Your Buck 3.608696 3.6



          • 5/5

            Installation Time: Afternoon

            March 20, 2019

            Love This!

            Easy Install and everyone that see this always ask me where to get it! I love the look! @jsp_105

            JoshuaP

            Year: 2002 Submodel: GT

            Helpful (0)

          • 5/5

            Installation Time: Less than 1 Hour

            February 25, 2019

            great product

            Fits well and looks great, great little appearance mod!

            AaronD

            Year: 1999 Submodel: GT

            Helpful (1)

          • 5/5

            October 20, 2018

            Awesome Product!

            This item added a nice touch to my black 97 GT. Very easy to install. . . needless to say, I am quite pleased with this product.

            SteveP

            Year: 1997 Submodel: GT

            Helpful (3)

          • 4/5

            Installation Time: Afternoon

            September 04, 2018

            Badgers MACH1

            I love them. They do chatter a little bit from the wind turbulence. But that’s an easy fix. I like that old school look but then my car isn’t that young so they look great on it I think. Thanks AM.

            ByronB

            Year: 2003 Submodel: Mach 1

            Helpful (3)

          • 5/5

            Installation Time: Less than 1 Hour

            July 21, 2018

            Styling in my Mustang

            I had it painted the same color of my car. Really easy to look out my back window. I just look stylish driving down the road great improvement on my Mustang.

            SusanP

            Year: 1996 Submodel: V6

            Helpful (4)

          • 5/5

            Installation Time: Less than 1 Hour

            June 15, 2018

            Perfect

            Love the old school look and feel. Very simple installation. Anyone could do it

            ChrisF

            Year: 2004 Submodel: Mach 1

            Helpful (4)

          • 1/5

            Installation Time: Afternoon

            August 01, 2017

            looks good online

            product does not completely fit across the entire window area. it falls short. a bit disappointed. gonna find another unit or product

            CalvinT

            Year: 2001 Submodel: GT

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            July 21, 2017

            Good buy

            Like it a lot easy to do by yourself just have the time to not stress to instill it

            Tank

            Year: 2002 Submodel: GT

            Helpful (5)

          • 2/5

            Installation Time: Weekend

            May 10, 2017

            Could Be Much Better Fit Wise

            I waited a long time for these louvers to be available in aluminum, I had no desire to put plastic ones on my car. Unfortunately, the aluminum louvers do not fit my 2003 exactly or evenly. I had to adjust and reset them several times to get an acceptable fit. They look good now, but it should not have been so difficult to install them. Quality is very wanting.

            TK

            Year: 2003 Submodel: Cobra

            Helpful (7)

          • 3/5

            April 29, 2017

            Its "OK"

            When I was looking for louvers I wanted metal ones so it didn't look cheep. These where the only metal ones I could find and they looked promising. It took me and a friend about 2.5 hours to get installed. the reason it took so long was because one of the plates you attach to the window was slightly off (my fault) but those plates will NOT come up easily if you mess up. there was a lot of bending and pulling we had to do to get the louvers to fit properly. After we finally got them on we took it for a drive and immediately I noticed that the louvers wiggle a lot when you are driving, and at around 50-60 MPH the louvers start to hit the back of the window because of the wind. I'm going to add some type of adhesive foam to the louvers so they don't make as much noise while driving. Overall the lovers look amazing and i'm happy with them but it was a bit of a pain to install and there are still some things I need to fix.

            Crashin

            Year: 2002 Submodel: V6

            Helpful (4)

          • 5/5

            Installation Time: Afternoon

            April 25, 2017

            Get it!

            Get these! They look way more aggressive than the plastic ones. The only problem was the rattling noise after 40mph, but just head to home depot for some weather strip foam tape and place it under each louver and It'll fix the noise.

            sicsn95

            Year: 2004 Submodel: V6

            Helpful (5)

          • 4/5

            Installation Time: Less than 1 Hour

            January 11, 2016

            Classic look for my mach!

            I had the plastic louvers from AM before on for 2 years, i just wanted more of an authentic classic look to my mach. First off the fit is actually great. You jusy have to make sure to take your time with the install. I Didnt and the double sided tape didnt stick correctly. I Dig the look so i was willing to put up with it. To be safe i called the manafuctuer and i ordered more tie down plates. I Went ahead and took my time and also added Double sided tape to on top of the tie down pates for extra protection. I Also painted The louvers Gloss Black and i do lobe the look. Theres a little space in the bottom bewteen the window and trunklid but i dont mind it. I defetly would recomend these just take your time and do it right. Awesome Look for my mach!

            Anthonyu

            Year: 2003 Submodel: Mach 1 miami, FL

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            July 10, 2013

            Had them for 3 Years

            Not sure why people are having so much trouble. If its banging the back glass like some of the reviews say then its not installed correctly. . It also fits perfect so again if it doesnt look like its fitting your car correctly, then you didnt install it properly. I have had these for 3 years and they are super durable and excellent quality, fit and finish. I left them with the matte black for the first three years. I recently removed them to have them painted satin black to match the spoiler. Cant wait to get it back on. . They look great!

            DSM1

            Year: 2004 Submodel: Mach 1 NC

            Helpful (8)

          • 1/5

            Installation Time: Less than 1 Hour

            May 30, 2013

            DO NOT BUY THESE LOUVERS! BUT THE MMD'S ISTEAD!

            Horrible louvers. Just don't buy and actually believe what the other reviews say. i was thick headed and thought i could install mine better but ive had all the exact same problems as everyone else. rattles, bows. horrible fitment on the window. pitching these in the trash and getting the plastic ones with the same design. wish these would of worked

            Scottmach32

            Year: 2004 Submodel: Mach 1 Quincy, IL, USA

            Helpful (5)

          • 5/5

            Installation Time: Afternoon

            July 14, 2012

            great look

            Brings a nice hardcore look to the streets. Very lightweight. Great accessory.

            BKallDAY

            Year: 2003 Submodel: V6 Union City, CA, USA

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            July 13, 2012

            cool louvers

            the louvers give my 94 the muscle car look of the 60s and 70s. plus they help in keeping the interior cooler by blocking out the sun thru the rear window. my wife even likes them and shes not a car person. thats saying alot.

            stangpilot51

            Year: 1994 Submodel: GT Raeford, NC 28376, USA

            Helpful (7)

          • 3/5

            Installation Time: Less than 1 Hour

            July 09, 2012

            this product looks great

            I like the look of this product ,but the fitment was off .Plus it rattled . I place door gasket on slats to ease noise

            stew

            Year: 2003 Submodel: GT virginia

            Helpful (7)

          • 5/5

            Installation Time: Full Day

            April 27, 2012

            YES I DO RECOMMEND THIS PRODUCT please read below before you go off other reveiws and not buy it.

            Let me start off by saying although the price is steep it is WELL worth the money. Ive owned my louver for 2 years and over those 2 years I have learned there are 2 types of people; EITHER you love rear window louvers or you hate them. There is no in between. Not only does this look sexy but it also keeps my car much cooler as well! If you like rear window louvers listen to me CAREFULLY... TAKE YOUR TIME INSTALLING THIS PRODUCT. I suggest you make your measurements and check check and recheck them before you 3M your mounts to the windows. This PRODUCT WILL FIT PROPERLY you just have to take your time. DO NOT RUSH installation and follow the instructions to the "t". The louver does rattle a little bit but its on the TOP of the louver. Simple fix is to buy some foam weather strip and put 2 (2in) pads centered on each side of the top visor. I painted my louver and I intend to repaint it again soon with a more custom paint job. I RECOMMEND THIS PRODUCT 1000x and will put my money on it that if you REALLY like Rear window louvers you will be EXTREMELY satisfied. Check out my Picture yellow mustang gt with (GT) painted on the louver

            secretsquirrel956

            Year: 2004 Submodel: GT Phenix City, Alabama

            Helpful (13)

          • 4/5

            Installation Time: Afternoon

            March 04, 2012

            Some slight problems, but overall nice look!

            When I received these louvers I placed them on my rear windshield and noticed how poor the fitment quality is. However, if you try to "stretch" the louvers you can get a close enough fit. Also, they have a pretty obnoxious rattle starting around 30 MPH. To fix this, I purchased sponge weatherstriping (closed cell) 1/8in x 3/8in (roughly $4 for a 10ft roll, which I purchased 3 of) and lined the underneath top edge of each louver which fixed the problem entirely. Overall nice rear window louvers once these problems got solved!

            BKSTANG03

            Year: 2003 Submodel: V6 Wellsville, PA

            Helpful (6)

          • 5/5

            Installation Time: Less than 1 Hour

            January 28, 2012

            aluminum louver

            This aluminum louver is much better looking than the plastic ones. Most of the reviews are correct as i experienced some. The instructions provided is just a guide. Do what you feel is correct of the installation. It does rattle alot on the back window, What you can do is roll some double sided tape in a roll and put underneath each one of the ridges. It worked for me and you cfant really tell its there... Yes i recommend this product!

            ccoreydylan21

            Year: 2004 Submodel: GT casper,wy

            Helpful (13)

          Related Mustang Categories