Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
1-888-332-7930
Mon - Sun, 8:30 AM EST - 11:00 PM EST
Win 1 of 2 $15,000 Mustang Builds! Enter To Win!

American Muscle Graphics Black Super Snake Style Stripe Kit (05-14 All)

Market Price $114.99
Starting At

$114.99

FREE Shipping
  • Item 26156G05
  • MPN# 26156G05

Local Install Shops

Quoted installation from $125

View 3 Shops

near 19355 (change)

Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.

Will this fit your Mustang?

Ship to: ASHBURN - 20146
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Video & Details

    • Super Snake Styling
    • Premium Cast Gloss Black Vinyl Material
    • Includes 3 Pre-Cut Sections for Easy Installation
    • 12" Center Stripe with Two 1/2" Pinstripes
    • Fits All 2005 to 2014 Mustangs

    Review & Installation Video

    Review & Install Video

    Hey I’m Justin with AmericanMuscle.com and I’m taking a closer look at our AmericanMuscle graphics super snake style vinyl kit fitting all 2005 and newer Mustangs. There’s no denying that the Shelby GT500 super snakes were the baddest of the bad as far as production Mustangs go. Even though they’ve undergone changes over the years, one thing has remained the same, those telltale stripes down the middle. Our AmericanMuscle graphics packaged is inspired from the later generation super snakes, and are available in your choice of either white, black, matte black, or silver. Of course, all of our AmericanMuscle graphics are constructed using only the highest quality premium cast vinyl, which will last for several years on your ride without fading or peeling. Since we test fit on our fleet of cars first, you can expect a perfect fit on your ride. Before getting started with the install, you’ll want to make sure you have a spray bottle filled with a soap and water mixture, the included squeegee, and a razor or exacto-knife. Whenever you tackle a large vinyl project such as this, it’s going to take a little bit of time, so if you follow the detailed instructions, and exercise a good amount of patience, you should be wrapped up in about 6 hours. So if you’re looking to add a little bit of that Shelby super snake flare to your Mustang, then be sure to check out a set of our AmericanMuscle graphics vinyl today.

    Super Snake Styling. Add impressive styling to your Mustang with a set of gloss black Super Snake style stripes. These AmericanMuscle Graphics vinyl stripes will give your Pony the same aggressive appearance as the limited edition Shelby GT500 Super Snake for head-turning good looks.

    Perfect Fit Guaranteed. AmericanMuscle Graphics vinyl designs have been test fit, refined, and tested again on our very own fleet of vehicles to assure a perfect fit every time.

    Superior Quality Materials. AmericanMuscle Graphics uses only the highest quality Premium Cast Vinyl available on the market today - designed to last at least 8 years of harsh outdoor weather. It's far more durable than our competitors' cheap, calendared vinyl film which starts to degrade in just a couple of years!

    Application. These high quality AmericanMuscle Graphics gloss black Super Snake Style vinyl stripes will fit any 2005 to 2014 Ford Mustang, including the V6, GT, Bullitt, and Shelby models.

    Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

    What's in the Box
    • (1) Hood Bumper Stripe
    • (1) Roof Stripe
    • (1) Trunk Stripe
    • (1) AmericanMuscle Instructions
    • Tools included:
    • (1) Squeege
    Installation Info
    Tech Specs
    Specifications
    • Fits: all 2005 to 2014 Mustangs
    • Material: Vinyl
    • Color: gloss black
    • Hood Stripe: 102" long by 14" wide
    • Roof Stripe: 74" long by 14" wide
    • Trunk Stripe: 74" long by 14" wide
    • Width details: 12" center stripe, two 1/2" pinstripes, 1/2" space between stripes = 14" total
    Will it fit my Mustang?

    People Who Bought This Item Also Bought

    Customer Photos (49) Submit Your Photo

    View All 49 Photos

    You Might Also Like

    6 Questions / 6 Answers

    Ask a Question

    for the people who had the shop install how much did it cost you to have them installed?

    dylan92

    • I had mine put on at the shop and they only charged me $150. It only took them a few hours and they did an excellent job.

      Apollo

    Helpful (1)

    Protecting the stripes. My mom has white vinyl stripes on her 2010. Ford, where she had them installed, told her to use wax to protect and buff out rain spots. I recently bought and applied these super snake stripes. Your install guide says NOT to use wax. I'm unsure if it's because we have two different types of vinyl ( hers seem to be thicker). But, is there anything I can use to protect my stripes from the weather? And they look stunning! Thanks American Muscle for a high quality, beautiful product!

    Sheridan

    • I had custom stripes made for my mustang, and my guy said NEVER wax vinyl stripes. They will eventually dry out and crack. (look at stripes from some of the 70's cars when the stripes were all cracked ect...waxing does this. I use a vinyl/leather cleaner and conditioner (Maquires) that keeps them looking new.

      Bronx61

    Helpful (1)

    I bought a racing stripe for my 2009 Mustang a few years ago. What color black is this stripe? I want to buy a unpainted spoiler and paint it black to match the stripe. Do I just get gloss blsck or do I have to get a ford black code number

    Stang2009

    • The American Muscle Graphics Black Super Snake Style Stripe Kit is a generic gloss black, since it is a vinyl, it will not be an exact match for any of the OEM black paints, however it will be closest to UA Black.

      Rob D

    Helpful (0)

    Does this kit come down all the way to the bottom bumper back and front?

    Anonymous

    • This kit gives you more than enough slack, so-to-speak, in order to achieve having the stripes reach from bumper to bumper. We have extra added in order to accommodate for body mods like hood scoops and spoilers.

      JeffAM

    Helpful (0)

    How many years do these last without fading or cracking?

    Anonymous

    • If cared for properly, the Black Super Snake Style Stripe Kit can last well over 5 years. The Sun will begin to fade the stripes and the weather will also put a toll on them, however, if you use UV vinyl protector they should last quite a bit of time. It would be difficult to say exactly how long they will last, as it will depend on the weather conditions were you live and if the stripes.

      AMJEFF

    Helpful (0)

    Curious, how long after can I put the car through the car wash after installed or will that hurt it and I have to hand wash it?

    Someone

    • HI, For this Black Super Snake Style Stripe Kit you will need to leave the strip on for several hours, depending on climate before cleaning car. Use a quick detailer in a spray bottle for the initial cleaning then hand wash car waiting at least several days for the first time after drying. Do not power wash vinyl or wax vinyl, After a week or so you can take your Mustang through automatic soft cloth car wash.

      Chris J

    Helpful (0)

    More Products You Might Like

    Customer Reviews (32) Write a Review

    Overall Rating 4.6

    out of 5 stars

    Installation Time:Full Day

    Installation Cost:$100-$250

    • Fit 4.517241 4.5
    • Appearance 4.931035 4.9
    • Bang For Your Buck 4.448276 4.4



    • 5/5

      Installation Time: Afternoon

      November 24, 2017

      Great stripe kit

      Looks great and really breaks up the wide hood. Fairly easy to install as long as you don’t rush. I’m happy with it

      RichardD

      Year: 2012 Submodel: GT

      Helpful (1)

    • 5/5

      Installation Time: Full Day

      November 10, 2017

      GT dressing!!

      I had a graphics shop install these stripes. They are a chore to install, because they don't release trapped air.

      PeterW

      Year: 2005 Submodel: GT

      Helpful (1)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      August 19, 2017

      What a difference

      Before having the stripes put on my mustang I could tell it needed something to make it stand out. Once the stripes were applied,WOW, what a difference in the appearance of the mustang. All my friends have talked about the change and I am completely satisfied with my change in my mustang.

      CharlesP

      Year: 2014 Submodel: V6

      Helpful (1)

    • 5/5

      Installation Time: Shop Install

      May 18, 2017

      Super Snake Stripe Kit

      The product is an outstanding product made by 3M, I had a professional install and they prefer this product, easy to work with and form around the curves of your car. I do suggest taking it to someone who knows what they are doing.

      CharlieJ

      Year: 2006 Submodel: V6

      Helpful (1)

    • 5/5

      Installation Time: Afternoon

      April 05, 2017

      Snake stripe

      The stripe when on pretty easy. 1.) Be sure to wash and dry along with air dry with air hose. This gets everything off. 2.) Measure each side inward about every 6 inches this way it is easy to keep the stripe straight. 3.) Use a damp cloth for the final touch ups. 4.) Get it out in the full sun and don't drive for the day.

      Shelby1

      Year: 2014 Submodel: GT

      Helpful (1)

    • 1/5

      Installation Time: Full Day

      March 22, 2017

      Touchy

      Was wrinkled from shipping, tried to use heat to relieve them and it was ruined. had a custom job done by a local shop, beware when applying it yourself. plenty of material included and i'm sure would have been great had my product been up to par.

      JoshuaS

      Year: 2008 Submodel: V6

      Helpful (1)

    • 5/5

      Installation Time: Afternoon

      January 23, 2017

      Super Snake stripe kit

      They were very easy to install as long as you put enough soap and water on the car. Do it early before the sun is beating down on the car our in the shade somewhere. The hardest part was to get the stripe to form around the bumpers. You WILL need a HEAT GUN don't do it without one a hair dryer won't do a good job.

      MustangGuy

      Year: 2008 Submodel: V6

      Helpful (2)

    • 4/5

      September 01, 2016

      A change of look

      It totally changes the appearance of the ca, It took me avow 5 hours to complete the job. you only need a littler patience to do it. I love the end product.

      rogeliohdez

      Year: 2013 Submodel: V6

      Helpful (3)

    • 5/5

      August 04, 2016

      Nice !!

      These stripes really make my car stand out and I love them !

      Christ

      Year: 2014 Submodel: V6

      Helpful (3)

    • 5/5

      Installation Time: Full Day

      June 14, 2016

      Nice design and cut

      The decals were perfect. A great color as well as finish. Made my car look even better and also awesome finish to them. I would however suggest a professional installation be done when it comes to the back and front of the car.

      PonyMan

      Year: 2014 Submodel: V6

      Helpful (3)

    • 1/5

      Installation Time: Afternoon

      March 29, 2016

      Be Aware!

      I bought these stripes for my mustang and immediately took them to a professional custom shop where they do vinyl wraps on cars daily. They informed me that because of how this product ships, there are chances of ripples and fade in the vinyl. They were not able to use these because of it, do yourself a favor and just go to a shop that can do it custom for you.

      bms197

      Year: 2014 Submodel: V6

      Helpful (3)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $250-$500

      March 18, 2016

      First Upgrade!!!

      Started my 2014 V6 Mustang project with this visual upgrade and I love it. The Black Gloss Stripe looks great on the Race Red and in just a cpl days I've already received numerous compliments. Took this to a shop to make sure it came out perfect, unfortunately where I'm at there isn't too many places to take it and they didn't do a PERFECT JOB. But the stripe still looks great and I'm very happy with my purchase and this product.

      BoLo

      Year: 2014 Submodel: V6

      Helpful (3)

    • 5/5

      Installation Time: Shop Install

      December 14, 2015

      Quality product

      I bought this for my wife and had a body shop install it ($150) to insure a perfect fit. American Muscle products are unfailingly high quality but rarely bargain priced. This stripe kit is both top quality and bargain priced. Buy it.

      JohnQPublic

      Year: 2005 Submodel: V6 Wilmington, De

      Helpful (3)

    • 5/5

      Installation Time: Full Day

      December 23, 2014

      Gary

      Looks awesome,changed yhe look of my car gets a lot of looks.Would buy again.

      speedfreek

      Year: 2014 Submodel: GT Reynolds,nd

      Helpful (3)

    • 5/5

      Installation Time: Less than 1 Hour

      December 20, 2014

      Super Snake stripes

      Great product. OEM quality. Recommend pro installer

      FormerPorsche

      Year: 2013 Submodel: Boss Ann Arbor, MI

      Helpful (3)

    • 5/5

      Installation Time: Afternoon

      October 05, 2014

      Great Exterior Addition

      I ordered this stripe since I have already had the Cervini hood installed that looks like the Super Snake hood. So the marriage of the two only seemed logical. I was reluctant to try to add this myself as there wasn't a body shop in Alabama that was willing to attempt the installation. I finally found " The Guy" who installed the stripe in an afternoon. He admitted the hood was easy, but the sections that go over the bumper required some finesse and some cuts to get it to fit the curves of the body. I also had the no factory hood and he had to nip a bit around the intake. Overall the apearance is great. I have received nothing but compliments since installed the stripe.I would recommend it to anyone and as for as tackling the endeavor yourself, well I leave that up to you, as everyone has different talents and skills. Mine is engines, so I stray away from body work of any kind. I hope thsi helps those who are the edge of getting a stripe or not.

      Texican

      Year: 2011 Submodel: V6 Mobile, AL, USA

      Helpful (2)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $100-$250

      September 24, 2014

      Matte black Supersnake stripes

      I had just traded my 2010 v6 to a Bremro package GT. I had ordered the white because It looked great on my Kona Blue v6. After I received it (on time)... I looked at it and decided to try the Matte Black stripes. Great decision because I have a dark grey car and the matte color was just what it needed. Thanks AM for a great product.

      Dave

      Year: 2014 Submodel: GT Mass.

      Helpful (1)

    • 4/5

      Installation Time: Weekend

      December 14, 2013

      Super Snake Stripes with some reservations

      I got these stripes for my '06 V6 'Vert because everyone has the dual racing stripes... I always try to do my own work and before I got these I researched different methods to apply vinyl; I decided to go with the 'dry' method. The rear stripes came out great, but the hood stripe came with some ripples in the masking. I started to apply and in squeegeeing/smoothing out the stripe on the hood I got a fold in the stripe from one of the ripples. It's in the front of the hood where my bra covers so it is not noticeable, but I am still not happy with it. Since I have a convertible I have the entire roof piece unused and I will give the hood a second shot with it when it gets warmer out (Applied first attempt in a heated garage) and will try to use the 'wet' method. But the roof piece has even more ripples in the masking so I am a little concerned how it will turn out. What I did get on the rear looks awesome though and I would recommend these stripes for the attitude they lend to the car! I also got the SHR rear honeycomb decklid panel (Which is VERY sweet) and the two together look absolutely amazing and give my otherwise plain rear end a mean look! Check out my pic... (rear only for obvious reasons). I'm the Satin Silver in the snowy driveway. I also have the sequential taillights and "Mustang" third brake light. I love the rear end of my car now... (OK, that might sound just wrong in some circles, LOL) If other than the ripples (I'm wondering if I got an end of line product run), I definitely recommend these Super Snake Stripes for your ride. They set it off as a bit different and maintain a nasty look to your car! I also seem to get more invites to "GO AT IT" When I pull up next to those little "WEE- WEE" Honda owners - which BTW, I just blow away with my AIRAID throttle body spacer and Flowmaster muffler. LMAO! Why do they even try??? :P

      DevereIII

      Year: 2006 Submodel: V6 Kettering, OH, USA

      Helpful (1)

    • 5/5

      Installation Time: Shop Install

      Installation Cost: $250-$500

      December 07, 2013

      great overall

      every thing in dealing with am was professional and pleasant THANKS AM

      hdgiant

      Year: 2013 Submodel: GT Milford, NJ, USA

      Helpful (1)

    • 4/5

      Installation Time: Full Day

      April 14, 2013

      excellent stripe

      My only gripe about this vinyl stripe is... It scratches real easy. If you are not going to clear over these strip take extra care when washing and wiping down your car and make sure you have no dirt on the stripe or cloth when cleaning. They will scratch easily. Other than that I am satisfied with the looks of this racing stripe.

      Pauly3

      Year: 2011 Submodel: V6 Upstate NY

      Helpful (1)

    Related Mustang Categories