Video Review & Installation

Hi I’m Justin with AmericanMuscle.com, and I’m taking a closer look at our AmericanMuscle Graphics GT 500 style stripes, fitting all 2005 and newer Mustangs. To any Mustang fan, the Shelby GT 500 needs no introduction, these amazing parts have been the pinnacle of performance ever since their introduction in 1967, and continue to raise the bar to this day. These stripes are offered in both 5 and 10 inch widths, and in several different color options including matte black, gloss black, silver, and white. All of our AmericanMuscle Graphics are produced right here in house, using only the highest quality premium cast vinyl, our team then tests and tweaks each design on our very own fleet of Mustangs first, ensuring a perfect fit for your ride. When you receive your vinyl from us, you’ll notice we break the kit down into 3 different sections, just to make the install a little easier. This includes one for the front bumper and hood, one for the roof, and finally the trunk section. Before you get started with the install, you’ll want to make sure you have a few basic vinyl tools on hand. This includes a razor or exacto-knife, a spray bottle filled with a soap and water mixture, and of course the included squeegee. If you’ve never worked with vinyl before, don’t worry, it’s really not all that bad, as long as you take your time and follow the detailed instructions. With that being said, because this is such a large job, we’re going to call it 6 hours from start to finish, just to be on the safe side. So if you love the look of those iconic GT 500 stripes and let’s face it, who doesn’t, then you’ll want to check out one of our many GT 500 style options available right here at AmericanMuscle.com