Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!
Win Any MBRP XP Series Exhaust! Enter Daily

Cervini's 2-Piece Speedster Cover - Unpainted (94-04 Convertible)

AmericanMuscle no longer carries the Cervini's 2-Piece Speedster Cover - Unpainted (94-04 Convertible). Please check out Ford Mustang Convertible Top Parts for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Race Inspired Styling
  • Flexible Urethane Construction
  • Fits 1994-2004 Mustang Convertible
Mean Machine. Give your convertible Mustang the attitude it deserves with the Cervini's 2 Piece Speedster cover. The Cervini's Speedster cover will turn heads on the street and at shows, and goes great with other custom convertible accessories including light bars for a race-ready look.

Superior Quality. This premium quality kit is made with urethane for durability and a OEM quality finish. Cervini's backs this kit with a lifetime warranty so you know it's designed to last. Kit includes free wool lined storage bags to protect the covers when they are in your trunk. Ships unpainted with a white gel coat finish.

Simple Installation. This 2-piece Speedster Cover will require limited drilling of the interior side panel for installation and comes with all necessary hardware. Easily removable and can be stored in the trunk when not in use. Mustangs with the Mach 1000 Stereo System will not allow the covers to fit inside the trunk.

Application. This unpainted Cervini's 2-Piece Speedster Cover is specifically designed to be used on all 1994-2004 Mustang Convertible models.

Technical Note. AmericanMuscle recommends professional installation of all body parts.We also recommended test fitting these products before they are painted.

Fitment: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 Details

MPN# 4000

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
Hardware included:
  • (1) 2-piece Speedster Cover
  • (6) Aluminum Rivets
  • (4) Back-up washers
  • (4) Button Snaps
  • (4) O-rings
  • (2) Speedster bags (Left Hand & Right Hand)
  • (2) Rolls of rubber gasket 52"
  • (2) Threaded Knobs
  • (2) Speed Nuts
  • (2) Button head cap screws
  • (1) Seat Belt Brace
Installation Info
Will it fit my Mustang?

You Might Also Like

Customer Photos (43) Submit Your Photo

View All 43 Photos

More Products You Might Like

Questions & Answers (8)

5 Top Rated Questions

Two piece speeder cover 1995 GT I have a two piece cover and have lost one of the 'Ball Type" attachments that holds the top down on the side. Is there a replacement available? The top I have is about 5 years old and the piece has a ball joint on one end that fits into a clip type connection. I hope you can help!!! Buster Judy

  • Unfortunately, we don't carry any replacement parts. I'd highly recommend contacting Cervinis directly. They are very easy to deal with and they may be able to help you out with the part you need! Their number is: 800-488-6057 and they are open Mon-Fri 9-6pm EST. Hope this helps!!

Helpful (1)

can i drive my car with the cover on ?

  • You will be able to drive with this on yes.

Helpful (0)

will this fit a base Convertible with a V6 ?

  • Yes, The Cervini's 2-Piece Speedster Cover will fit all models from 94-04.

Helpful (0)

can I get one for a 2014

  • Hello! This item only fits Mustangs from 1994-2004, unfortunately at this time we do not offer one for a 2014! Keep an eye out in the future however!

Helpful (0)

Is this easily removable or is it permanent. Will there be an install video in the future.

  • Hello! The Cervini's 2-Piece Speedster Cover is easily removable and can be stored in the trunk when not in use. However, mustangs with the Mach 1000 Stereo System will not allow the covers to fit inside the trunk. We do not currently have plans to release a video on this product.

Helpful (0)
Post Your Question
3 More Questions
Will this fit a 2004 cobra? 1 answer
How do I get it painted to match my car? 1 answer
Will this fit with a wind deflector? 1 answer

Recommended For You

Customer Reviews (15) Write a Review

Overall Rating 4.1

out of 5 stars

Installation Time:Full Day

Installation Cost:$100-$250

  • Fit 4 4
  • Appearance 4.8 4.8
  • Bang For Your Buck 3.8 3.8

  • 4/5

    Installation Time: Shop Install

    Installation Cost: 0-$100

    February 24, 2018

    Looking forward

    I am very excited about this product. I however will not give a final opinion until late spring. right now, install and paint is the to-do list


    Year: 1994 Submodel: GT

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    January 04, 2017

    Very Sporty

    This gives my GT convertible a very sporty look, very noticeable. Just what I was looking for, thank you......


    Year: 2001 Submodel: GT

    Helpful (6)

  • 2/5

    Installation Time: Less than 1 Hour

    November 22, 2016

    Poor quality design!

    I have wanted one of these covers for years. Finally picked one up and I was very disappointed. Very poor design. It almost seems like there is no quality control. Installing was very simple however there is alot of work to be completed on this cover before you get it painted. Extremely disappointed with this product as I was so excited to have this on my stang.


    Year: 2000 Submodel: GT

    Helpful (7)

  • 4/5

    September 26, 2016

    Head turner

    Great mod to car stand out over all mustangs like yours have had for 10 years now, take off and put on a lot, only thing buttons don't last snapped them years ago


    Year: 1997 Submodel: GT

    Helpful (6)

  • 3/5

    August 30, 2016

    Basic fiberglass flaws

    I'll tell you right now. If you put this on your car, there better be no chance of rain because the pieces are huge, take 3 bolts to hold it together and helps to have 2 people install it. It's not ideal for grocery getting either cause you'll take as much time putting it on and taking it off as you would be in the grocery store. As build quality goes...the fastener buttons were in the wrong spots so I had to put new snaps on my car to align with it. Once it's bolted together the 2 pieces don't sit flush. Other then that though it really makes the car stand out


    Year: 2002 Submodel: GT

    Helpful (7)

  • 5/5

    Installation Time: Shop Install

    Installation Cost: $100-$250

    July 10, 2013

    Cervini's speedster cover

    Fits and looks great.. Excellent value for the money. Glad that I chose Cervini for my cover.


    Year: 2002 Submodel: GT Cocagne, NB, Canada

    Helpful (7)

  • 5/5

    Installation Time: Afternoon

    June 27, 2012

    very nice mod

    got this a few years ago very nice every where i go. get the hey that is sweet easy to install make the stang stand out!


    Year: 2000 Submodel: GT taylor michigan

    Helpful (7)

  • 4/5

    March 07, 2011

    Cervini's Speedster Covers

    Look amazing installed, and turns a lot of heads. The only down side is time it takes to put them on and take them off. Not something you want to do when you go to stores,etc... The other downside is they dont fit in trunk with interior trim. You have to take out back piece that protects convertible top when lowered to fit them in trunk. This is way storage bags say dont lower top with covers in trunk or rear glass may break. Instructions didnt mention to remove this piece you just have to figure it out on your own from reading warning on storage bags.

    Alex Gomez

    Year: 2004 Submodel: Cobra

    Helpful (24)

  • 5/5

    January 14, 2011

    excellent product



    Helpful (8)

  • 3/5

    June 08, 2010

    Looks Awesome!

    These covers make the car look amazing! They will not fit in the trunk of my 2001 GT even with the top up, or in the back seats so I hope i don't get caught too far from home in the rain! I would recommend if you are buying these to have a garage because putting them on is a bit of a pain lining them up right.


    Year: 2001 Submodel: GT

    Helpful (34)

  • 2/5

    April 19, 2010

    Looks Great but make sure you get all of the parts

    The covers look great on the car, but if you need anything from Cervini's you are on your on. The two small threaded knobs were missing from my package. Not wanting to hold up the body shop, I sent the coverv to be painted befor trying to get the knobs from Cervinis. They refused to send me the knobs unless I would agree to purchase the entire hardware pack at $39. Seems a small price after investing over $1k in the covers and paint, but it is the principle, they left the parts out and would not make it good. American Muscle is trying to help, but beware.

    Harvey Self

    Helpful (44)

  • 4/5

    February 21, 2010


    it make it look like a car that u will never say no to drive


    Helpful (10)

  • 5/5

    August 23, 2009

    great mod for the mustang

    this is top quality stuff here not cheaply made!

    daniel achorn

    Helpful (16)

  • 5/5

    July 16, 2009

    looks great

    they always ask where you get it, i say AMERICAN MUSCLE!

    gary nelson

    Helpful (12)

  • 5/5

    April 15, 2009


    Just what my Mustang needed to set it apart from all the others. This along with the style bar it\'s a real head turner....Awesome!


    Helpful (13)

Related Mustang Categories