How to Install Cervini's Brushed Lower Billet Grille (05-09 GT) on your Ford Mustang

Step 1: Remove the front bumper. QTY DESCRIPTION HARDWARE # 4 SCREWS 90935A151 PART# 7018 & 7078 PLASTIC TABS Fig. B Fig. A

Step 2: Remove the black plastic insert from the lower portion of the bumper. To remove the plastic insert, bend the plastic tabs on each side of the insert out of the way and pull out the insert as shown in fi g A.

Step 3: Aline the lower billet grille in the middel of the mouth opening and hold it in place. Mark the hole locations throught the pre drilled holes in the billet grille. Take the grille out and use the provided screws to make holes in the marked locations. You do not need to drill holes in the bumper. The provided screws will tap themselves into the plastic. Reinstall the lower grille and screw it to the bumper with the provided screws as shown in fi g B.