How to Install a MMD Rear Decklid Panel on your 2010-2013 Mustang

1. Using the supplied alcohol pad, wipe down the perimeter of the trunk lid where the tape will contact.

2. Peel the backing off the tape and line up the decklid panel on the trunk lid. ***It may help to test fit the decklid before peeling off the backing of the tape so you can see how everything is going to line up before the final installation.***

3. Once you have lined up the decklid panel, press firmly to set the adhesive tape. ***The panel should be flush with the left and right edges of the trunk lid, and parallel with the top crease.***