(approx) 15 Minutes
Simple installation for anyone.
Features, Description, Reviews, Q&A, Specs & Installation
Settings. Featuring eight preset settings, the Diablosport "MAFia" MAF Interface Adapter is perfect for all horsepower ranges, from street/strip car calibrations all the way up to 800 plus horsepower race cars.
Tune Required Settings. Settings 2 through 6 on the MAFia modulate the signal from the MAF to the computer to a point where a tune is required to properly allow these changes to be applied to the computer. Settings 0, 1 and 7 modulate the signal from the MAF to the computer, but not to the point where a tune is required.
Application. The Diablosport MAFia Mass Air Flow Calibrator is a direct plug and play upgrade adapter for all 1996 to 2004 Mustangs, including the V6 GT, Bullitt, Mach 1 and SVT Cobra models with either a factory or aftermarket MAF sensor.
Fitment: 1996 1997 1998 1999 2000 2001 2002 2003 2004 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
February 11, 2019
The only thing I could say is don’t buy this product unless you plan to tune your car by a professional, although it has decent preload featuresHelpful (1)
July 26, 2018
Another great purchase from A.M.
Great part...Received quickly so I could get my car properly tuned (524rwhp/552rwtq) AWESOMEHelpful (8)
April 10, 2018
Just what I needed - MAFia
I recently installed a Procharger P1SC on my 01 Bullitt and had to have it tuned. According to procharger, the stock maf would handle the horsepower I was expected to make, but it couldnt. Similar replacement MAFs are in the $300 range and I didnt want to spend that kind of money. The tuner suggested the Diablosport MAFia to me, and it worked perfect. He set it to a 30 setting and I ended up at 375 hp and 385 tq at the tires. Very happy with the diablosport MAFia.Helpful (5)
December 17, 2017
Just what i was looking for!!! Perfect it was exactly what i was looking forHelpful (9)
September 26, 2017
Great product and very easy to use. Great solution for those that want to keep the stock MAF while pushing high horsepower.Helpful (9)
August 28, 2017
Does what it says it'll do!
The MAFia does exactly what it says it does! Car runs MUCH better now! My only complaint is that the wiring harness could be 6 inches longer. My MAF is now inside my fender well so longer wires could help me locate it in a more convenient location. Otherwise it's a great product.Helpful (8)
June 15, 2017
fast shipping, great product, did everything I needed it to do. I get 80 of my stuff thru these guys and love everything.Helpful (9)
February 10, 2017
Looks good under that hood As stated, it's plug and play, but she still needs a custom tune.Helpful (9)
April 21, 2013
easy to use, simple hook up
I like this product. Noticeable differences in the preset programs. Runs smootherHelpful (9)
April 30, 2012
Not bad. Getting rid of the pegging is sweet. Install is simple and quick.Helpful (16)
So, this is only for supercharged/turbocharged Mustangs, right? No effects whatsoever on cars with only a CAI?
Hey Ali, Its not just for any type of forced induction but its a sensor that can handle up to 800hp. The only thing is that you would just need it tuned to your mustang. So it can work with just your CAI.
Will this work with my set-up? I have a NA 4.6L V8 with a BBK 78mm throttle body, K&N cold air intake with a stock MAFS on a SOHC rebuilt engine producing 400hp. It "hunts" for an idle on occasion and I think it's getting too much air for the stock MAFS. Will your MAFia address this problem and what setting do you think I should use? Thanks, White Eagle
The Diablosport MAFia is a mass air extender, meaning it gives a larger range of useability when the current MAF has exceeded the limits of its airflow metering capabilities. Unless you have exceeded the limits, there is no need to use this product on your specific application.
I have a v6 3.8litres with a procharger I have a lot of problem with the mix to proclaim mo says that the air mass flow is at the maximum reading can I put this to solve the trouble
This will extend the range of your factory MAF, you will need to tune for this as well with your application.
I have a 2001 v6 turbo car will this allow for the correct airflow through my stock maf
Unfortunately, the Diablosport MAFia will not be able to correct the airflow. We recommend if your running force induction parts on your vehicle to get a dyno tune.
I have a 2004 GT... Will this be plug and play or will I still need to add an external IAT sensor like all the others? Thanks
The Diablosport MAFia is plug and play!
The Diablosport MAFia is not designed to be used in a blow-through setup even thought it can handle higher amounts of horsepower.
I think the Diablosport MAFia would be a good upgrade. With a turbo setup and that power range, I would recommend the SCT BA-2600 Big Air 90MM MAF Meter / Sensor Item #38012 (http://www.americanmuscle.com/sct-ba-2600-maf.html) instead. I think will be able to gain better results with this MAF.
No additional hardware is required to install this; however, you will need to have your tune modified for your vehicle to run properly.
Using the MAFia will not harm the factory sensor, what it does is extend the range that it can operate in. This shouldn't affect the reliability of the stock sensor as it piggy backs onto it. Although if adding this onto your Mustang your would need to get the Mustang tuned to accommodate for this.
No, this product simply allows for a wider range MAF signal to support more air flow for more HP/TQ. If you're not maxing out your current MAF, adding this will not improve anything. Feel free to contact our Mustang Experts @ 888.226.9764 if you have any more questions!
(approx) 15 Minutes
Simple installation for anyone.
What's in the Box