Ford Performance Nodular Iron Flywheel - 6 Bolt (96-98 GT)

Customer Reviews (16) Write a Review

Overall Rating 4.8

out of 5 stars

Installation Time:Full Day

Installation Cost:$250-$500

• Performance Gain 3.923077 3.9
• Fit 5 5

• 5/5

  Installation Time: Afternoon

  February 21, 2017

  Awesome part

  Solid part , very affordable especially if it's needed in a pinch like mine was Would definitely recommend and would buy again

  MorganP

  Year: 1996 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 5/5

  October 05, 2016

  Ford Performance Nodular Iron Flywheel

  I had this installed at a shop, but they told me that they had no problems installing the Flywheel it matched right up as the stock one. As far me driving on with it, it feels great clutch pedal is a little bit softer now and it grabs better than stock.

  Pepe1997

  Year: 1997 Submodel: GT

  Helpful (1) Thanks for your input!
• 5/5

  September 09, 2016

  Ford Racing Nodular Iron Flywheel - 6 Bolt

  Looks identical to the factory flywheel. The pressure plate alignment dowels are pre-installed on the flywheel, and will accept the factory bolts for the pressure plate. Great part, even better price. I did not weigh the flywheels but they felt the same.

  Burzum10

  Year: 1998 Submodel: GT

  Helpful (1) Thanks for your input!
• 4/5

  August 22, 2016

  Flywheel

  Ford racing flywheel looked great, matched up great with the transmission. Great price for a oem replacement.

  Prettyricky

  Year: 1998 Submodel: GT

  Helpful (1) Thanks for your input!
• 5/5

  Installation Time: Afternoon

  August 21, 2015

  Very good price and perfect fit on 96 mustang gt

  Replaced tranny and clutch so while I was in there I replaced the flywheel that had been in there for 400,000 miles and just sanded every time clutch was replaced. Well paid to get it turned and ended up losing money cause the hot spots on it were higher up than the rest of the flywheel. So I got this one for a good price and it worked perfectly. But no matter how it looks it will only go on one way so remember that cause I thought the bolt pattern was wrong for a minute

  Bubba

  Year: 1996 Submodel: GT Huntington, WV

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Less than 1 Hour

  May 30, 2015

  love this site

  Best option vs. resurfacing flywheel. Why resurface to save a few dollars when a new one isn't much more.

  stingerstang97

  Year: 1997 Submodel: GT New Oxford, PA

  Helpful (1) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 5

    5

  • Bang for your Buck 3

    3
• 5/5

  Installation Time: Less than 1 Hour

  May 29, 2015

  piece of cake

  This is going on a new engine so I didn't have to put it on in the car. I had previously balanced the engine so I had the flywheel balanced separately. The shop commented that it took very little to bring it in, less than some billet wheels they have done. Since I was going from automatic to standard I bought new flywheel bolts and new clutch bolts. The flywheel already had the pins in it so that was one less thing I had to come up with. In the past I have used nodular wheels on some pretty stout FEs and have never had a problem with failure, so, I am fairly confident I won't have a problem on a basically stock 4.6.

  Mike

  Year: 1996 Submodel: Other Owasso, OK

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Shop Install

  Installation Cost: $250-$500

  May 21, 2015

  Flywheel

  Once again AM makes it possible to own a 98 mustang gt manual trans. Literally no auto shop or junkyard had a flywheel for a manual. They could order used ones for $160 of course AM had the stock style ford racing for $140, so far so good replaced my clutch and all that at the same time, feels better than before and I got it in 2 days (michigan). My old flywheel had been machined to much already. I was confused if this flywheel was meant for stock hp setups but a call to AM cleared that up quick. I've bought a lot from this website and will continue to do so, thanks AM

  Mayweather

  Year: 1998 Submodel: GT Michigan

  Helpful (1) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  December 23, 2014

  It grabs perfect

  The only flaw is it didn't have PB or TOB but besides that it's awesome an grabs great

  Raystang911

  Year: 1998 Submodel: GT Rhode Island

  Helpful (1) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Shop Install

  Installation Cost: $250-$500

  July 19, 2014

  this is perfect

  I have an odd year mustang gt 2000-2001. the car has a romeo block (6 bolt patter) with a t-45 tranny. This is perfect even though the description says 96-98 GT. for all the people that might not know, since the t-45 was stopped and the tr3650 was put into the later mustangs, if you are one of those people that has a romeo block (11 valve cover bolts, 6 bolt flywheel setup) and a "older" t-45 tranny (it says it on the sticker on the door and under the tranny itself), this is the flywheel u need! dont trust the vin! my vin said i had a windsor engine but i dont! anyway everything hooked up smooth, it feels good and i put an exedy 350 stage 1 clutch and i have absolutely no complaints. this is the best flywheel.

  v8cookiemonster

  Year: 2001 Submodel: GT

  Helpful (1) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Full Day

  April 22, 2014

  Great replacement flywheel!

  This flywheel is a great replacement when doing a clutch job onyour 4.6. Also American Muscle is very helpful with any questions you may have and they were very quick with shipping. Thanks AM!

  Bizzy640

  Year: 1997 Submodel: GT Slidell, LA, USA

  Helpful (1) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 5/5

  Installation Time: Shop Install

  Installation Cost: $100-$250

  October 18, 2013

  Great Price

  This flywheel was very reasonably priced, and was a great fit. many of the other flywheels were much more expensive. Highly recommend this product

  242urban

  Year: 1998 Submodel: GT Marshfield, WI, USA

  Helpful (1) Thanks for your input!

  • Performance Gain 4

    4

  • Fit 5

    5

  • Bang for your Buck 5

    5
• 4/5

  Installation Time: Afternoon

  June 26, 2017

  Flywheel replacement

  Good replacement. Same as stock. Had a few scratches on it, maybe from stacking them? Other wise good product

  AdamB

  Year: 1998 Submodel: GT

  Helpful (0) Thanks for your input!

  • Performance Gain 1

    1

  • Fit 5

    5
• 4/5

  Installation Time: Afternoon

  May 29, 2017

  Work the way it is should

  Replaced the spec-billet-steel-flywheel with this after 2 piece failure on the Spec design. A little snug fit but works well and priced right.

  JoeM

  Year: 1997 Submodel: GT

  Helpful (0) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5
• 4/5

  Installation Time: Weekend

  December 27, 2015

  This part is great

  Am very excited excited to see what this part can do for my stang I'll let you know what it givess me in HP

  Missy

  Year: 1998 Submodel: GT Florida

  Helpful (0) Thanks for your input!

  • Performance Gain 3

    3

  • Fit 5

    5

  • Bang for your Buck 4

    4
• 5/5

  Installation Time: Afternoon

  June 21, 2014

  Great product

  Easy install gained alot of power. Ready to spend more money with american muscle

  scubbasteve76

  Year: 1997 Submodel: GT El Dorado, KS 67042, USA

  Helpful (0) Thanks for your input!

  • Performance Gain 5

    5

  • Fit 5

    5

  • Bang for your Buck 5

    5