(approx) 30 Minutes
Simple installation for anyone.
$49.99 (pair)FREE Shipping
Hey what’s up everyone? I’m Justin with AmericanMuscle.com and I’m checking out these GTR inspired pre-painted headlight splitters for all 2010 and up mustang GTs. MMD has come through yet again with this product and other unique parts which aim to help your mustang stand apart from the crowd. These splitters draw their inspiration from the road race concept mustang GTR which besides its killer performance is equipped with some real cutting edge styling parts, these splitters being one of them. These splitters are constructed from ultra-durable ABS plastic and then are painted right here at AmericanMuscle headquarters in a state of the art paint booth using the same paint and clear coat ford uses on their mustangs. Installation is a breeze thanks to the very detailed instructions and everything that’s included in the kit. Your first step is to prep the back of your splitter using the 3M adhesion promoter, once you have that done go ahead and apply your 3M automotive tape which has already been cut for you. After you have got that, go ahead and move over to your headlight, clean the area on your headlight using the supplied alcohol wipes, align the splitter to the alignment dot that’s right in the middle of your headlight, adhere firmly and that’s it. It shouldn’t take you any more than 30 minutes. So if you want to invoke some rare Saleen concept car styling’s on your coyote mustang then you’ll definitely want to check out these pre-painted MMD headlight splitters.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2010 2011 2012 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
April 23, 2019
I have a silver car with the GT black grill surround so I was debating sliver or black splitters. I decided on the sliver ones and they look great. If you take your time and line them up on the headlights they'll look great. The only problem I had was the double sided tape, the tape with the splitters wouldn't adhere to the headlight. So I used some 3M double síded automotive tape I had it worked, so be prepared to change the tape if needed. Otherwise it was an easy installation. Due to having to redo the tape it took 45 minutes, without the hiccup it would have been a 10 minute job.Helpful (0)
April 14, 2019
I was under the impression and told by a tech that the unpainted was trim black in color, it wasn't. I had to find a match and painted the pieces. one of the pieces had a surface defect that didn't accept paint in the same manner as the rest of the piece. didn't notice till after it was installed. You need to trim the 3m tape to the splitters. once applied its not coming off.Helpful (0)
April 11, 2019
excellent color Match
Hard to match color was spot on ! Tri Coat Blaze Yellow. The right side piece was not as good a fit as the left. The Left one fit perfect and the Right one was longer. The inset for the wide side edge was not the same too as the other side and did not fit well. I used it anyway because it looks great. Fit ? ,,, Not so good.Helpful (0)
February 08, 2019
Many compliments already
I was afraid these splitters weren’t going to fit my my v6. But i made them work, they fit perfectly. I’ve gotten so many compliments on my car since I added these bad boys on!Helpful (0)
December 30, 2018
Looks great! A nice appearance upgrade, quick and easy installationHelpful (0)
December 22, 2018
This item made my mustang more agresive, and beautiful..love it... thanks American muscleHelpful (3)
June 06, 2018
Delivery was fast and the paint finish on the parts was perfect. Installation was quick and painless, approx 15 minutes start to finish. The finished product looks excellent. Nice aggressive finish to the front end.Helpful (0)
April 24, 2018
Head light spliter
I was at 1st impressed with the look but after just a few weeks they both started to loose their grip on my head lights. (And yes I cleaned them both and followed there instructions) I removed them and wasted the cost because not able to reapply.Helpful (0)
February 23, 2018
My car looks much better with splitter headlights it looks more aggressive AHelpful (11)
November 05, 2017
Quick and easy! Didn't take me that long to install.Helpful (12)
Will these splitters able to be used over smoked covers?
The MMD Headlight Splitters can be installed on your headlights equipped with the smoked covers. However, they will need to be installed on top of the headlight covers.
I have 2 questions: 1- If i install these headlights splitters, and if i need to remove the front bumper for some reason (say repairs), can the front bumper be removed without damaging the splitters or the pumper? 2- Okay so i know these won't work on a V6, but why exactly?
These headlight splitters would allow you to remove the bumper no problem! As far as the fitment these splitters are designed to work on the GT front ends only. The V6 models will have a slightly different front end.
I’ve noticed in one of the customer photos it looks as though they have placed these on a v6? Is it possible to get them to fit correctly in a 2012 v6
Unfortunately they will not fit the V6 models.
I managed to place the grill side of the drivers side splitter 1/4 inch low. Do you have replacement 3M tape available?
At this time we do not have replacement tape available separately, however 3M automotive grade tape is available at most auto parts stores.
Will these fit on a 2012 GT/CS?
This will not fit V6, Shelby GT500 or Mustangs equipped with the GT/CS grille Surround.
These GT-R style MMD Mustang headlight splitters are designed to be a perfect fit on any 2010-2012 GT Mustang. They would not fit the V6 variant.
As long as the grille and grille surround are the same geometry as a stock Mustang, this product will certainly fit. The Saleen grille in question indeed falls under that category which would make this product compatible. I will post the Saleen grille below: https://www.americanmuscle.com/saleen-s281-front-grille-0509.html
Hello, No the MMD Headlight Splitters will not fit a 11-12 GT500. We do not carry headlight splitters that do.
Hello, Unfortunately this would not work with a v6.
When installing the Splitter, you will use the alignment dot on the headlight lens for guidance. If you follow the link below, it will take you to the installation guide for the Splitters. http://1.cdn.lib.americanmuscle.com/files/41179.pdf
I have these installed on my mustnag and there is NO noticible decrease in light output at all. They really look great and really change the musclular nature of the look of your mustang. I have it lowered 1 inch and have window vent visors, and chrome rims on it. Aside from my chrome rims, the headlight splitters made the most of a appearance change to my car.
They didn't on My car but the splitters didn't fit real well.
They will not as the grille surround is shaped differently from the stock piece.
IMO i have them on my car and i love them, but i DO have the split style spec D projector headlights. So on my car it looks mean and sexy. So its all up to opinion, but as for basic lights it wont block anything, plus headlights are aimed down not straight forward...
(approx) 30 Minutes
Simple installation for anyone.
What's in the Box
Not compatible with the GT/CS Grille Surround.