Guaranteed Free Delivery by 12/24! for most items - Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$5,000 Up for Grabs! Enter to Win >
Claim Your Free Gift! Limited Quantities. Claim Now >

Hurst Quarter Window Louvers; Matte Black (15-21 Fastback)

Item 406537-99
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $142.99 You Save 10% ($14.00)
Our Price

$128.99 (pair)

FREE Shipping

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
In Stock

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Hey guys, Adam here with americanmuscle.com, and today we're taking a quick look at, and, of course, installing the Hurst quarter window louvers in the matte black finish, available for the '15 and newer Fastback Mustang.You should be checking these out if you're looking for a retro nostalgic '60s to '70s muscle car styling for the side profile of your S550.Now, Hurst is a staple in the Mustang community. They make a lot of really cool retro muscle car parts. Things from shifters, shift knobs, and louvers like these.These in particular are your very straightforward louver styling. It's got the three-slat system here. It's got a perfect contour to the window mold, and it follows the bodylines absolutely perfectly. This is gonna fit into your quarter windows really snug for a perfect fit.The nice thing about this is the matte black finish right out of the box is ready to be installed. No need for prep work, no need for custom painting. You can throw it right on with the 3M automotive bonding tape included in the kit.Now, the 3M tape there is built for automotive purposes. Don't be afraid when you hear the words tape being used to install this. If you get it done properly, it will stay on, especially at highway speeds.Now, that matte black finish, getting back to that there, is a perfect match also to the window trim. The window trim here uses weather stripping, of course, in the trim around the window. This is something that will blend in perfectly, and almost looks like it could have come on the car from the factory.The construction here is an ABS plastic, something you can expect from a lot of after-market exterior styling parts. It's impact resistant, UV resistant, so it's not gonna fade in the sunlight over time, and it just looks really sharp.Now if you are someone who wants to custom paint it, you can definitely take this over to a paint shop of your choice to get it either custom painted, or paint matched to your OEM color.For the price of this guy, it's coming in right around $120 bucks for the pair, making it one of the more affordable louver options in the category. It gives you a really impactful styling, but at a pretty affordable cost. It's something that makes all the difference, but you can save some money in the process.The install's gonna get one out of three wrenches on our difficulty meter. Anybody can tackle this in the driveway at home, with about 15 minutes from start to finish.The 3M tape you're just going to apply to the back side of the louver. You're gonna clean everything off with the alcohol wipes provided for you in the kit, and then you're going to stick them on. It's as simple as that. I'm gonna take you through the entire process. What do you say we get started?All right, first step here, we're gonna start on our table with our louvers face down. You want to grab the alcohol wipes included in the kit. Rip that guy open. We're basically gonna wipe down these little tabs where the 3M tape will sit.Now, the reason you want to do this is you want to get any of the prep work from the manufacturing process. You want to get all the debris off of there, any dirt and dust. That stuff can prohibit a good bond with the 3M, so you just want to wipe that guy down. Let that alcohol dry. Then we're gonna use the 3M tape roll included in the kit to lay little strips on each one of these tabs.All right, I'm gonna start with this longer strip here. Basically, just take our tape roll. I'm gonna lay that down. And just work your way straight across.Once you have that applied, you just want to put good, firm, even pressure on the entire strip. Grab a knife, or some cutters, or something, and just snip it off. Do the same thing for each one of them.All right. Once you have all those taken care of, just repeat that same process for the other side. And then what you're gonna do is peel off just a little bit of each of the piece. So, these are only about two to three inches long, so peel off about halfway.For the backing on the 3M, just peel off a couple of inches, maybe even halfway, just to have this piece on the outside to make it easier once we get to the install portion. So, I'm gonna grab my knife, and I'm just gonna peel off the backing here on each one. All right. Do that for each one of these, and then repeat on the other louver.All right, first step for the window. We're basically gonna prep it the exact same way. Grab the alcohol wipe included in the kit. I'm gonna wipe down the edges of the glass where that 3M tape will apply, just to make sure we're getting rid of any dirt and dust. If it's really dirty, you can use a clean microfiber and a soap and water mixture. But the alcohol wipes included in the kit should do just fine.Once you have that taken care of, grab a louver, and we're gonna set it in place. Now, your best bet for lining this up is to use the point up in this top corner. So that's gonna tuck in right at the end of this weather stripping where the glass meets the weather stripping.So, I'm gonna set that guy in place first. Follow the bodyline down the bottom, and it'll just automatically line that top guy up. So, once you have that in place, start putting pressure on the 3M. It's a little forgiving, so if you don't get it the first time, just make sure you're not putting too much pressure on it first. You can peel it back off. That looks good. And if you haven't already done so, you can peel off that 3M backing as it sticks out.All right. So we're just gonna peel off the rest of that backing. Put pressure on the 3M. Repeat this exact same thing on the other side.That's gonna wrap up my quick overview and install for the Hurst quarter window louvers in the matte black finish, available for the '15 and newer Fastback. This is a great way to go. Pick yours up right here at americanmuscle.com.

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features

      • Hurst Quarter Window Louvers
      • Three Slot Open Louvered Design
      • Matte Black Finish
      • Durable, Lightweight ABS Construction
      • Straight Forward Peel and Stick Installation
      • Sold as a Pair - Driver and Passenger Side Included
      • Fits 2015-2021 Fastback Mustang Models

      Description

      Hurst Styling. Installing a set of Hurst Matte Black Quarter Window Louvers is one of the easiest appearance modifications you can make to your 2015-2021 Fastback Mustang. With a three-slot open louver design, these Hurst Louvers will give your S550 Mustang bold, muscular styling while still allowing you to see clearly out of your c-pillar windows.

      High Quality Construction. Hurst's Quarter Window Louvers are manufactured from injection molded acrylonitrile butadiene styrene (ABS) plastic. ABS is an extremely strong material known for its light-weight, superior durability and impact resistance - making it perfect to withstand the hazards of daily driven vehicles. Hurst then completes their Quarter Window Louvers in a smooth matte black finish for aggressive good looks.

      Peel and Stick Installation. To break away from mundane quarter window styling, this pair of Hurst Louvers has been constructed for installation inside of the factory window trim, delivering a sleek, seamless visual appeal. Attaching directly to the window glass, these louvers utilize automotive grade 3M bonding tape for a durable and secure fit. Just clean the surface, peel the backing and stick in place - it's that easy.

      Recommended Styling Upgrade. When installing exterior quarter window louvers or scoops on your Mustang, it is recommended to add a set of quarter window blackout decals to hide the ugly back side that wasn't meant to be seen by human eyes. See part number 386505.

      Application. These Matte Black Hurst Quarter Window Louvers are specifically designed for installation on 2015-2021 Mustang Fastbacks, including V6, EcoBoost, GT and GT350 models. Not compatible with convertibles or the 50th Anniversary models with the louvered quarter window glass. Sold as a set of two, one driver side and one passenger side.

      Fitment:

      CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Driver Side Louver
      • (1) Passenger Side Louver
      • (1) Tape
      • Adhesion Promoter
      • Alcohol Wipes
      • Instruction Guide
      4.8

      Customer Reviews (89)

        Questions & Answers

        10 More Questions