FREE 1 to 3-Day Delivery on Orders $119+ Details
1. Verify you have all of the following parts included in the kit: (1) JLT Oil Separator with Elbow Fittings, (1) mounting bracket, (2) fine thread machine screws, (1) bolt, (2) 1/2" hoses, (1) 1" section of 3/8' hose (2) Fittings 5 8"ID x 1 2"ID 2 Fittinis 1/2"ID x 3 8"ID 1 Fittin. 3 8"ID
2. Gather all of the followin • tools needed for the installation: Drill with small bit Philli es screw driver
3. Remove the facto PCV hose
4. Use the suelied bolt and mount bracket
5. Use the 2 suss lied fine thread screws to attach the Oil Se.arator to the mounting bracket.
6. Use the supplied hoses and 5/8"ID x 1/2"ID fittings to connect from the PCV VALVE to the FILTER SIDE of Separator and from the other fitting to the INTAKE MANIFOLD
BULLITT: Use the su plied 1/2"ID x 3/8"ID fittin s and 3/8" hose to make your connections
To properly clean the filter in the Oil Separator, remove it with a pick or small screw driver and spray any degreaser or solvent through 't and let it air dry. Clean it every 5,000 miles. Thanks for the business. If you have any questions, please e-mail [email protected] or call 757-335-1940. Our hours are Monday-Friday. 8:00am - 5:00pm Eastern Time.