Guaranteed Free Delivery by 12/24! available on most items - Details

Talk to a Mustang Expert
Every day 8:30AM EST - 11:00PM EST
Win $3,000 In Mods!! Enter Daily!

Maximum Motorsports 6-Point Drag Race Roll Bar (05-14 Coupe)

AmericanMuscle no longer carries the Maximum Motorsports 6-Point Drag Race Roll Bar (05-14 Coupe). Please check out Ford Mustang Roll Bars and Roll Cages for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Top Notch Drag Race Roll Bar
  • Ideal Addition for the Track
  • Drastically Increases Safety
  • Adds a Hardcore Accent
  • Improves Rigidity of Chassis
  • Looks Great with Stock Interior
  • Made from 1.75 in. x .134 in. Tubing
  • Ships Uncoated, Bare Steel
  • Includes Contour-Hugging Pads
  • No-Weld, Bolt-In Installation
  • Fits All 2005-2014 Mustang Coupes
Muscular Style. When you take your 2005-2014 Mustang Coupe to the track, you'll need to make sure that it features an attention-grabbing upgrade that pairs well with your stock interior so that you stand out among the rest of the impressive cars. With Maximum Motorsports' 6-Point Drag Race Roll Bar, your Mustang will look tougher and more complete than ever, ensuring you get second glances from everyone you pass.

Unbeatable Protection. Built to dramatically increase the safety of driving your Mustang, this roll bar is as tough and strong as they come so that you'll have a little more peace of mind when driving at top speeds. The bar even increases the rigidity of your chassis for an unbeatable ride every time you get behind the wheel.

Thick Tubing. In order to increase the effectiveness of this roll bar, it is constructed from hardcore tubing that is 1.75 in. in diameter and .134 in. wall DOM tube, which is much stronger than the .120 wall ERW seamed tubing that is normally used. The bar ships uncoated with bare steel, so the customized finish is completely up to you.

Installation. This roll bar does not need to be welded into place, but instead has a bolt-in installation process for your convenience. Set aside about 2 hours when securing this roll bar to your Mustang. All hardware and contour-hugging pads are included.

Application. Maximum Motorsports' 6-Point Drag Race Roll Bar is a perfect fit for all 2005-2014 Mustang Coupes.

Fitment: 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Details

CA Residents: Warning: California's Proposition 65

What's in the Box
  • (1) Roll Bar
  • Installation Pads
  • Installation Hardware
Installation Info
Will it fit my Mustang?

You Might Also Like

Customer Photos

Questions & Answers (4)

4 Top Rated Questions

Is this cage NHRA approved?

  • The Maximum Motorsports 6-Point Drag Race Roll Bar will meet NHRA and NMRA rules

Helpful (0)

Do you need to remove/modify any interior pieces? Will rear seats remain usable?

  • The Maximum Motorsports 6-Point Drag Race Roll Bar is a simple bolt-in design. Though, you will need to remove the rear seat in order to have a proper install.

Helpful (0)

With the removable harness mount, if removed, is there room to recline the driver and passenger seats?

  • The Maximum Motorsports 6-Point Drag Race Roll Bar with the Removable harness mount will allow for you to recline your seat more than if it were installed.

Helpful (0)

Will this cage work with my glass top 2014 Shelby GT 500

  • The Maximum Motorsports 6-Point Drag Race Roll Bar will have no issues being used with a glass top equipped vehicle, however additional care must be taken during installation to avoid damaging the glass roof when installing this cage.

Helpful (0)
Post Your Question


Related Mustang Categories