Review & Install Video
Hey, guys. Adam here with americanmuscle.com. Today I'm bringing you a quick overview and install of the Modern Billet Chrome Cup Holder Cover with the pony logo and, of course, the Mustang lettering, which is available for all 2010 to 2014 Mustangs. In this video, I'll be going over the styling and appearance, of course, of the Modern Billet Cup Holder Cover, as well as the materials and construction. I'll top the video off with a one out of three wrenches on our difficulty meter, as far as the install is concerned, because it will go on simply with 3M automotive bonding tape. The Modern Billet Chrome Cup Holder Cover with the tri-bar pony logo and the Mustang lettering will be for any 2010 to 2014 Mustang owner who's just looking to add a noticeable, small detail to their interior for a little bit of extra customization.
Obviously, this is a very, very straight forward part we have here today. It's a chrome cup holder cover, so it kind of speaks for itself. It's going to be a cup holder cover that goes over the factory option, just to transform it into a more noticeable, shiny, more attractive, show car-like finish appearance for the interior of your Mustang. Now, the thing that's a little bit different about this one, besides the fact that it's chrome and it has that mirror-like shine, is that it's got the tri-bar pony logo labeled right into the materials, as well as the officially licensed by Ford Mustang lettering. This way you get some pony pride in your interior while catching people's attention when they hop in your ride.
As far as the materials and construction goes, this one is made of a high quality 6061-T6 billet aluminum, a very recurring material here from Modern Billet. They make a lot of these interior dress-up pieces and under hood dress-up pieces, all made of that 6061 material that proves to be standing up against heat resistant impact, of course, and it's a longer lasting lifetime. It doesn't chip, flake, or crack. Something that will keep that mirror-like shine as long as you polish it every now and then, it'll definitely keep its attractive finish.
Now, as far as pricing is concerned, you can pick this particular piece up individually for just about 65 bucks, which is why I wanna point out that there are other options out there as far as kits are concerned. You can get this, among other things that are similar to it, for a kit, just to save you a couple of bucks. However, if you are just interested in getting one individual piece, like this cup holder cover, you can pick it up for 65 bucks, which might just fit your budget and might be what exactly you're looking for. Now, if this is what you're looking for, it is a very small piece for your interior. You get the mirror-like shine, you get a very durable quality material from Modern Billet, which is something that they are known for, and, of course, you get the pony pride to rock in your interior.
As far as the installation is concerned, I'm not even sure you can call it an install because it is so simple. As you can see on the back here, I'll show you guys, there is 3M automotive bonding tape already pre-applied to the back. All you'll have to do is use the alcohol wipes provided in your kit, of course, and clean off the area you're applying this to, freeing it of all dirt and dust to make sure it gets a good bonding. Once that's taken care of, peel off the backing on each piece of the 3M tape and stick it into place. Just put pressure all around it and you'll be good to go. Overall, this shouldn't take you more than five minutes to take off and, of course, apply. Overall, should get a one out of three wrenches on our difficulty meter.
Just to wrap things up, if you're the owner of a 2010 to 2014 Mustang and you're looking for a small interior piece to get some noticeable shine, lead a show car quality-like appearance, you might want to check out the Modern Billet Chrome Cup Holder Cover with the tri-bar pony logo and the Mustang lettering, which is available right here at americanmuscle.com.
Add the impressive good looks of chrome to your 2010-2014 Mustangs boring factory plastic interior with an officially licensed Mustang Cup Holder Lid Cover that matches the existing chrome accents to complete the unfinished appearance of your stock interior.
Officially Licensed by Ford.
This Modern Billet™ Cup Holder Lid Cover is officially licensed by Ford and features the Tri-Bar Running Pony along with "Mustang" text in block lettering engraved directly into the cover, this is not a cheap decal that will peel off in a matter of months.
CNC machined from high quality 6061 T6 billet aluminum this Modern Billet™ Cup Holder Lid Cover is triple chrome plated and polished to a bright brilliant shine for long lasting good looks.
Simply peel the two sided 3M tape from the back of the cover and set in place over the stock cup holder door panel for an easy 1 minute install. Go from plain Jane boring stock to award wining custom style in just 60 seconds.
This officially licensed Modern Billet™ Chrome Cup Holder Lid Cover with Tri-Bar Pony is designed to fit all 2010 to 2014 Mustangs, including V6, GT, BOSS and Shelby GT500 models.
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- What's in the Box
- (1) Cup Holder Lid Cover
- (1) Alcohol Prep Pad
- Installation Info
Installation Time: (approx) 1 Minute
Difficulty Level:Simple installation for anyone
- Tech Specs
- Will it fit my Mustang?
- Boss 302 - 12, 13
- GT - 10, 11, 12, 13, 14
- GT500 - 10, 11, 12, 13, 14
- V6 - 10, 11, 12, 13, 14