(approx) 1 Hour
Simple installation for anyone.
Open Box from $157.96
Select Year2017 2016 2015
Justin: Hey everybody, Justin with americanmuscle.com here with Chip Foose checking out the MMD by Foose hood scoop available for your 2015 and up Mustang in your choice of either unpainted or prepainted. Who better to talk about this product than the man himself, Chip Foose? Chip, what do we have going on here?Chip: Well, this hood scoop, I actually put it on my 2015 convertible that I built for the SEMA show. Before I had ever seen the car in person I had gotten a couple of pictures and I had done some sketches. I really changed the design quite a bit once I actually got the car, because it's the subtlety of form that's the design language of this car. You want to be able to pull that same language into any part that you're building so it doesn't look like an after market part and it looks like something that should've come from the factory. When you follow the little lines and the details, even this little fade out of the line coming into the front, it's the same thing that's happening with the headlight. I just pulled the same little peak that's in the hood itself. It comes through the center of the hood. Like I say, it's the subtlety of design language that you want to put into every part that you're making to put on the car. It's giving it that muscle car feel but it still looks like that classic Mustang design that you know from Ford itself.Justin: It really does look like a muscle car hood. You spoke to me at the SEMA show. You really liked how the factory hood had these two almost lines in the hood and you really wanted to work off that.Chip: Yeah. I love these lines. The way it rolls up, I wanted that same surface to transfer right through into the hood scoop but look like it's not an after market part that's bolted on the car. It looks like a part that came on the car.Justin: Absolutely. Speaking of bolting it up to your car, guys, it does include detailed instructions of course along with a drilling template. There is a little bit of drilling involved but not that bad. Figure a couple of hours from start to finish to get everything bolted up to your car. Again, it is available either unpainted or prepainted. With the AM prepainted parts, of course you can expect a perfect color match right out of the box as we can see here with this ingot silver car. Chip, great part, sir. It looks great on the Mustang here. Guys, if you want a really unique hood scoop for your 2015 and up Mustang, be sure to check out this particular hood scoop from MMD by Foose here at americanmuscle.com.
Subscribe to our YouTube Channel
Features, Description, Reviews, Q&A, Specs & Installation
Fitment: 2015 2016 2017 Details
CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
October 03, 2019
2016 Mustang convertible
Love this hood scoop, I was a little nervous to drill the holes in the hood but after taking my time and measure 3 time I went with it. It took me 2 1/2 hours by my self to install. I would recommend this hood scoop to any one. Love the look.Helpful (2)
September 21, 2019
Nice for the money
Well made. Best packing I have ever seen. Would take great effort to damage in shipping.Helpful (0)
August 21, 2019
My did not mash a all,Have to repainted.It came White not Oxford white and not metalic.Helpful (1)
August 04, 2019
MMD by FOOSE Hood Scoop - Pre-Painted
Looks great, get a of compliments on it. Paint matched great.Helpful (0)
June 02, 2019
Foose hood scoop installation!!
Hood scoop is beautiful but expected from Chip Foose! Paint matched perfect! Only quirk about installation is a half inch bit too tight for installation 9/16 better making easier get washer in! Otherwise hour and half done!!Helpful (0)
May 02, 2019
Excellent color match and look makes huge difference in appearanceHelpful (0)
March 02, 2019
This is such a great scoop. Follows the lines perfectly. Pretty straight forward install it just takes some time and patience.Helpful (0)
March 02, 2019
Awesome, just what I was looking for
Looks great and get so many compliments. Fit and finish are perfect and Mr. Foose really formed this scoop to accent the lines of the car. Great job!Helpful (0)
December 13, 2018
Lifting on Back Corners
Nice looking hood scoop but the Ford aluminum hood will cause this scoop to lift on the back corners because the bolt holes are to far forward and to the middle. I got mine in January of 2018 and this happened as soon as the weather warmed up and the 3m tape was soft enough to lift. I sure would like to know of MMD or anyone else has a legitimate fix for this.Helpful (16)
October 24, 2018
Love the scoop
Great scoop, good color match. They could make it easier by providing a stiff, clear plastic template instead of that wishy-washy paper tape. I made my own cardboard template. Other than that, it's a great scoop. I will post pics.Helpful (5)
Can I install this scoop with out drilling the hood? If I use only the 3M tapes it will be OK or No?..
The MMD by FOOSE Hood Scoop is to be installed using bolts and 3m tape. We do not advise just using 3m tape because of safety reasons.
What are the actual dimensions ? Thx.
The dimensions for the MMD Hood Scoop are around 44.75" x 34.75" x 4.25" (L x W x H).
How does the scoop act aerodynamically? Does air pass through or is it blocked inside? Is it open or closed at the front or windshield? How heavy is it? Will it add a lot of weight to my Red Line Tuning hydraulic hood supports?
This hood scoop will not allow much air to pass through and will be blocked. As for the weight this would be around 15 lbs and would work perfectly with your hood struts.
Is there any way to get a picture of the hood unpainted
Unfortunately, at this time we do not have a picture of the unpainted hood scoop and are using the product photos of the prepainted part. This hood scoop unpainted would arrive in a matte black finish.
Does it fit my 2018 EcoBoost
Unfortunately this has not been confirmed to fit the 2018 Mustang models due to the changes made to the hood for the 2018 model year.
Yes, that is correct. The lengthof the scoop from the back of the scoop to the front on the longest point of the scoop would be 44.75".
The standard Gloss Black is available from us under the color "Black, UA". UA is the black paint code from Ford which is used to guarantee they match.
When installed properly this scoop will not hinder the movement of the wiper arms.
This does don't come in carbon fiber.
This does not fit 2018+ model years.
The MMD by FOOSE Hood Scoop due to the differences in the hoods between the 2015-2017 and the 2018-2019 Mustangs.
Yes, the hood scoop will include 3M adhesive tape already pre-installed.
Magnetic Metallic will be a metallic gray color. The two black paint codes are UA Black and G1 Shadow Black. Neither of these colors will be metallic, but it sounds like Shadow black would be closer to the color you are looking for.
It would require custom modification however this could function as a hood vent if those modifications are done.
(approx) 1 Hour
Simple installation for anyone.
What's in the Box