Free Shipping On Orders Over $49. Details

Talk to a Mustang Enthusiast
1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 For Your Mustang! Enter Daily

MMD Hood Scoop - Pre-painted (10-12 GT, V6)

Item 41275
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
$0.00
Market Price $258.99 You Save 13% ($34.00)
Our Price

$224.99

FREE Shipping

Open Box from $157.49

Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Choose options to add to cart.
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    Features, Videos & Details

    • Matches 2010-2012 Factory Mustang Colors
    • Painted Right Here at AmericanMuscle!
    • Durable, Lightweight ABS Construction
    • Honeycomb Insert Included
    • Fits 2010-2012 GT and V6 Mustangs

    Review & Installation Video

    Hey everyone I’m Justin with AmericanMuscle.com and I’m taking a closer look at this preprinted hood scoop from MMD for all 2010 and up Mustangs. MMD continues to make some killer styling parts that are sure to make a dramatic improvement on any Mustang. This particular scoop is designed to give your factory mustang hood a subtle touch of that classic GT 350 styling. The scoop itself is constructed from ultra-durable abs plastic and can easily withstand the stresses of being mounted to the front of your ride. We here at AmericanMuscle then paint each scoop using the same base and clear coat that ford uses in their factory for a perfect pain match as you can see with our grabber blue GT behind me. Included in the package is the preprinted hood scoop itself, plastic honeycomb insert, 3M tape and hardware, your template, and the detailed instructions. Now you do have to drill 3 holes into your factory hood to properly install the scoop, I know some of you may not be big fans of drilling to your ride but it’s a nice peace of mind to know that this scoop with both the hardware and 3M tape isn’t going to come flying off no matter how fast you push your ride. Once you have your 3 holes drilled go ahead and a prep the area underneath the scoop with the supplied adhesion promoter, once you have done that install the 3M tape in all the necessary spots remove the backing, line it up, and adhere carefully. Once you are done that simply tighten the 3 bolts underneath the hood and you are done. I know it sounds a little daunting drilling into your hood but you should have total confidence as the template and the detailed instructions make it a very straightforward install that should take you no more than an hour. So if you’re looking to add a little bit more muscle to the hood of your 2010 and up mustang, and you are a fan of the classic GT 350 styling then you will definitely enjoy the looks and the convenience of this pre-painted hood scoop from MMD.

    Modern Muscle Design. Complete the modern muscle car styling of your Mustang with a Modern Muscle Design Hood Scoop for aggressive good looks. This MMD Hood Scoop is not only made of durable ABS plastic for a long life, but it comes pre-painted to match your Mustangs factory color straight out of the box.

    Painted Here to Match 2010-2012 Factory Mustang Colors. This Modern Muscle Design Hood Scoop is painted right here, at AmericanMuscle HQ, with the same base coat clear coat urethane paint Ford used on the exterior of your Mustang to match your factory color perfectly.

    Durable Construction. Manufactured from acrylonitrile butadiene styrene (ABS) material for its light-weight and superior durability, this MMD Mustang hood scoop can handle the bumps and abuse of daily driving while keeping a show-quality appearance. Honeycomb insert included.

    Simple, Straight Forward Installation. No messy bondo or fiberglass is required for installation. This Pre-Painted Modern Muscle Design Hood Scoop installs with the supplied hardware, drilling locator strips, and 3M doubled sided automotive bonding tape for a quick installation.

    Application. This Pre-painted MMD Hood Scoop is designed to fit the 2010-2012 Mustangs with the factory hood, including the GT and V6. Does not fit Shelby GT500 models. The hood scoop measures width: 16" Front and 17 3/4" Rear, length: 21 1/2", height: 2".

    Find Your Paint Code

    • Choose the year of your Mustang from the options above. The color choices displayed will be the only exterior paint colors available for your year Mustang. The first two letters for each color option are the paint code for your exterior color.

    • If you need to verify your paint code, look inside the door jam of your driver's side door at your VIN plate to find your exterior paint code.

    This MMD Hood Scoop is also available Unpainted for those who like to do-it-yourself.

    Fitment: 2010 2011 2012 Details

    CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    What's in the Box
    Hardware included:
    • (1) Pre-painted hood scoop w/ 3M pre-installed
    • (1) Honeycomb scoop insert
    • (2) Drilling Locator strips
    • (3) Screws
    • (3) Washers
    • (4) Hood insulators
    • Alcohol Pad
    • Installation Instructions
    Installation Info
    Tech Specs
    Will it fit my Mustang?
    • Boss 302 - 12
    • GT - 10, 11, 12
    • V6 - 10, 11, 12

      Customer Photos (27) Submit Your Photo

      View All 27 Photos

        Questions & Answers (3)

        3 Top Rated Questions

        Install on Vinyl and how does it come? I have your matte black hood decal installed on my '11 mustang and I was curious if it would be possible to install this scoop on top of the vinyl without screwing it up. Also, what color does it come unpainted? I would want it to be matte black to match the hood decal.

        • Yes u can put it on the stripe but it does not Come in a matte black finish, the hood scoop Is held on by two sided tape, hope this helps

        Helpful (1)

        What color is the unpainted scoop? Thks

        • Hello! The unpainted MMD Hood Scoop comes in a flat black color.

        Helpful (0)

        compatibility issues with 2013s? Just wanting to know if these MMD hood scoops work with the 2013 hood revamp?

        • No, the 2013s are going to have a different hood scoop than this one made for the 2010-2012 because like you mentioned, they did change the '13 hood slightly. Keep an eye out!

        Helpful (0)
        Post Your Question

          Customer Reviews (32) Write a Review

          Overall Rating 4.6

          out of 5 stars

          Installation Time:Afternoon

          Installation Cost:$100-$250

          • Fit 4.6 4.6
          • Appearance 4.7 4.7
          • Bang For Your Buck 4.55 4.6
          • Color Match 4.8 4.8
          • Fit & Finish 4.266667 4.3



          • 5/5

            April 19, 2019

            Review from MMD Hood Scoop - Unpainted (10-12 GT, V6)

            Hóófßçóóp

            Everyone likes my 2010 Mustang GT hood scoop looks wonderful high-quality thank you

            Margaret

            Year: 2010 Submodel: GT

            Helpful (0)

          • 5/5

            June 04, 2018

            Review from MMD Pre-Painted Hood Scoop - Kona Blue Metallic (10-12 GT, V6)

            Pre paint hood scope Kona blue metallic 10-12 V6

            Fits like a glove. Colour match perfectly. Nice construction and easy to install.

            Luc

            Year: 2010 Submodel: V6

            Helpful (0)

          • 4/5

            March 20, 2018

            Review from MMD Pre-Painted Hood Scoop - Black (10-12 GT, V6)

            Hood scope

            Good instruction about one hour to install looks great

            Robert

            Year: 2010 Submodel: V6

            Helpful (0)

          • 5/5

            August 23, 2017

            Review from MMD Pre-Painted Hood Scoop - Performance White (10-12 GT, V6)

            Great looks!

            Very pleased with the look of the hood scoop on my '12 Mustang! Fits nicely and adds a different look to the car!

            Gordie

            Helpful (0)

          • 5/5

            Installation Time: Weekend

            July 25, 2017

            Review from MMD Hood Scoop - Unpainted (10-12 GT, V6)

            MMD Hood Scoop, 10-12

            Product quality is excellent. Very little prep work. This was custom fit application to an aftermarket hood on my 03 GT. Because of custom application time for install was longer and more detailed. This scoop was exactly what I was looking for.

            Wibur

            Year: 2003 Submodel: GT

            Helpful (7)

          • 5/5

            Installation Time: Less than 1 Hour

            June 25, 2017

            changed th whole look of my car

            All my friends tell me how hot my mustang looks with this hood scoop.I must admit that my mustang turns more heads now than it ever did.

            RobertC

            Year: 2012 Submodel: GT

            Helpful (8)

          • 4/5

            Installation Time: Less than 1 Hour

            June 12, 2017

            Absolutely!

            Felt my car was missing something since adding the GT 500 spoiler and Chin Spoiler to the front end. Hood scoop was missing. So I decided on this one. I didn't like the wider lower profile scoop. I installed it about 5 inches from the rear of the back of the hood. I didn't want it flush against the rear. Be careful when tightening the nuts under the hood. The instructions state "firmly" tighten them. I figured they would "stop" so to speak. They don't, you can break the plastic the nuts are attached to which is the plastic lip inside the scoop. I think I heard one crack but stopped tightening. Hoping the other two bolts and the 3M tape hold it down. But all and all looks mean. Instructions were spot on but be careful not to follow exactly with measurements if you intend to move it down further on the hood. The instructions have it sitting near the rear. Giving 4 stars only because I wish it had more bolt areas to avoid using so much tape. Feel if you didn't need tape on the sides you'd see less seam. Paint was a spot on match even for my 2011 Black Mustang.

            SMcAuley

            Year: 2011 Submodel: GT

            Helpful (9)

          • 2/5

            June 12, 2017

            Review from MMD Pre-Painted Hood Scoop - Performance White (10-12 GT, V6)

            Fit not so good, but looks not so bad.

            I'm retro-moding (I meant to say that) my 2012 to look like 1969 MACH 1. So the look is what I was looking for but...... MMD needs to fix the scoop to fit the profile of the hood. No amount of tape should be expected to hold the hood skin enough to deform the hood and that is what is happening. Also, I wasn't real thrilled about drilling 3 holes in my hood, but after realizing that I don't want the scoop flying off, I began measuring, looking, re-measuring, regretting and then re-measuring, I finally drilled the holes. One installation tip I would give is to use blue or green painters tape to help mark where the scoop needs to be after the holes are drilled, I used tape to align where the rear of the scoop needs to sit left to right so you can just sit it down. The 3 drilled holes will still give the rear a little side to side. Just don't expect the middle left and right sides of the scoop to sit flush with your hood without some extra work. Are you listening MMD?

            LarryB

            Helpful (0)

          • 5/5

            April 18, 2017

            Review from MMD Pre-Painted Hood Scoop - Black (10-12 GT, V6)

            satisfied customer

            The color matched perfectly and it looks great on the car. The only con is that the 3m tape didn't stick very well.

            Mustangallie

            Helpful (0)

          • 5/5

            April 08, 2017

            Review from MMD Pre-Painted Hood Scoop - Black (10-12 GT, V6)

            Styling

            Fit and finish is great. Gives the car a better look.

            charlesa

            Helpful (0)

          • 5/5

            April 03, 2017

            Review from MMD Pre-Painted Hood Scoop - Red Candy Metallic (10-12 GT, V6)

            This hood scoop adds that muscle car look!

            I ordered the pre-painted scoop and it matched perfectly. Installation took just shy of an hour with no surprises. I do recommend that you install it about 4 inches lower than the directions indicate for a better fit on the hood. I love it!!!

            MichaelH

            Helpful (0)

          • 5/5

            December 17, 2016

            Review from MMD Pre-Painted Hood Scoop - Black (10-12 GT, V6)

            MMD Hood Scoop Mustang GT/V6 2013

            Very good part, paint job was perfect. Install was very easy with good instructions. Second MMD hood scoop that I have installed. Will definitely buy again in the future!

            Rickmastertrim

            Helpful (0)

          • 5/5

            November 28, 2016

            Review from MMD Pre-Painted Hood Scoop - Red Candy Metallic (10-12 GT, V6)

            My pre-Painted Hood Scoop

            The Hood Scoop looks fantastic. I lowered it 4 inches more then shown in instructions which made a better fit. The templet was difficult to align and should be a full size sheet of paper. Otherwise a great kit.

            Beaner

            Helpful (0)

          • 5/5

            September 10, 2016

            Review from MMD Hood Scoop - Unpainted (10-12 GT, V6)

            mustang dress up

            I recently have this at the shop being painted/ will then be installed by them along with the 4.6 decals. I just want it done by a professional. I have purchased several items for my mustang but as of yet no pictures posted. Will send photos once I figure out how to download to my computer. Very pleased with every item so far!!

            Poppy

            Year: 2010 Submodel: GT

            Helpful (8)

          • 4/5

            Installation Time: Afternoon

            April 19, 2016

            Ehhh

            Looks great but the spot it tells you to install it isn't right. you need to go a little farther down if you don't want a gap. I've had it on for about 6 months and I haven't had any problems. I've been through multiple car washes as well and it still stays on however I will be washing it myself from now on in fear of it coming off. doesn't look bad but all in all it still looks like the stick-on part that it is.

            Williams997

            Year: 2012 Submodel: V6

            Helpful (8)

          • 4/5

            Installation Time: Afternoon

            March 22, 2016

            Review from MMD Hood Scoop - Unpainted (10-12 GT, V6)

            2011 scoop install

            Install due to the dimensions and contour to hood fit,takes longer than anticipated and not where it was shown in the demo pictures . Width wider on one end than the other was hard to square between the stripes. Bang for your buck was great, formidable look ,easy to prep the plastic to paint .

            Modmotorman

            Year: 2011 Submodel: GT

            Helpful (8)

          • 5/5

            February 05, 2016

            Review from MMD Pre-Painted Hood Scoop - Performance White (10-12 GT, V6)

            MMD Hood Scoop 10-12 V6

            Very satisfied with my pre-painted hood scoop! Very simple to put on, although I Did move it down the hood to 26 inches. Looks great and makes the car look fantastic!!

            Tony65

            Helpful (0)

          • 4/5

            Installation Time: Afternoon

            October 15, 2015

            Looks great, but the bad template dimensions ruined my stripes.

            I installed the scoop many months ago. At the time I followed the directions and mounted the scoop per the template dimensions. As others have mentioned, it was off 4" making it too close toward the windshield. I didn't know it was off because I just used the written instructions and drilled the holes in my hood. After mounting it, I stuck everything down with the tape provided. The tape held it down at the time, so I went on with life. A day or so later, I noticed that there was a gap along the side of the scoop now that the tape would no longer hold down. The tape in back was still holding and the gap wasn't really that noticeable, so again, I went on with life. Over the following months, because of washing and whatnot, the back tape finally no longer held. The front screws were holding it pretty tightly, so I thought I was fine. However, the slight movement of the scoop at driving speed was wearing into and tearing up the racing stripes on my car. :( Now it looks terrible! The finisher was this morning when I was driving at high speed and the scoop flew off the car and crashed to the concrete, basically destroying it. Result: destroyed scoop, damaged stripes, obviously have sun bleached stripes now, so a new scoop cannot be remounted in the correct position without replacing all the stripping on the car. So now my weekend show car is out of commission until I figure out what the heck to do to remedy the situation. ($$) UGH. AM, fix your instructions!

            MentorCoach

            Year: 2011 Submodel: GT Wichita, KS

            Helpful (9)

          • 5/5

            Installation Time: Afternoon

            July 11, 2015

            Review from MMD Hood Scoop - Unpainted (10-12 GT, V6)

            Second Set of Eyes

            All 3 holes are not equal distance. Measure all 3 holes from side to side at least twice from behind the scoop vent. Place the vent on for pre look before the scoop. Check each adhesive strip stick for secure.

            Astro14

            Year: 2012 Submodel: V6 Houston, TX

            Helpful (7)

          • 4/5

            May 14, 2015

            Review from MMD Pre-Painted Hood Scoop - Black (10-12 GT, V6)

            Hood Scoop Looks Great!

            I was interested in the rounder version version and was a little let down when taking a first look at it but once I installed it, it fit beautifully and I have no regrets.

            MustangRalphy

            Year: 2013 Submodel: GT California

            Helpful (0)

          Related Mustang Categories