Free Shipping On Orders Over $49. Details

Talk to a Mustang Expert
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $5,000 From Rovos! Enter daily!

Moroso Fabricated Aluminum Valve Covers - 11 Bolt (96-04 GT)

AmericanMuscle no longer carries the Moroso Fabricated Aluminum Valve Covers - 11 Bolt (96-04 GT). Please check out Ford Mustang Valve Covers for an updated selection.
This item currently can not be added to your cart. Please try again later.

Features & Details

  • Modern Race Styling
  • Lightweight Aluminum
  • Natural Finish
  • Sold as a Set of Two
  • Fits 96-04 4.6/5.4 2V, 11 Bolt Romeo Block
Modern Race Styling. Add a unique modern race look to your Mustangs engine compartment with a set of Moroso Fabricated Aluminum Valve Covers.

Quality Construction. Moroso fabricates these valve covers from light weight billet aluminum for superior strength and leaves them in their natural aluminum finish for aggressive good looks under your hood. And features a one piece CNC machined billet rail for a flat surface to ensure a tight seal.

Application. These Moroso Aluminum Mustang Valve Covers are designed to fit the 1996 through 2004 4.6L 2V V8 with the 11 bolt Romeo Block. So now you can go from boring stock to true custom for an exciting new look.

Fitment: 1996 1997 1998 1999 2000 2001 2002 2003 2004 Details

MPN# 68389

CA Residents: WARNING: Cancer and Reproductive Harm -

What's in the Box
  • (2) Valve Covers
  • (1) Knurled Billet Oil Filler Cap
  • Fasteners
Installation Info
Will it fit my Mustang?

You Might Also Like

Customer Photos (12) Submit Your Photo

View All 12 Photos

More Products You Might Like

Q & A

No questions about this product yet.

Ask the First Question

Recommended For You

Customer Reviews (9) Write a Review

Overall Rating 4.3

out of 5 stars

Installation Time:Afternoon

  • Fit 4.714286 4.7
  • Appearance 4.571429 4.6
  • Bang For Your Buck 4.142857 4.1

  • 5/5

    Installation Time: Afternoon

    April 09, 2018

    Moroso Valve covers

    Great product great quality be sure to add ur own baffles and vent holes prior to install


    Year: 2002 Submodel: GT

    Helpful (2)

  • 1/5

    September 23, 2016

    Valve Covers

    Don't buy these if you have Trick Flow heads. They do not fit. They will only fit stock heads. Very dissapointing. Would of been nice if Moroso would mention that in the description.


    Year: 2003 Submodel: GT

    Helpful (5)

  • 5/5

    Installation Time: Less than 1 Hour

    January 02, 2016


    I gained like 500 Horsepower from these valve covers. Absulutely amazing!


    Year: 2004 Submodel: Cobra R Dothan Alabama

    Helpful (13)

  • 5/5

    Installation Time: Less than 1 Hour

    August 28, 2015

    Engine jewelry

    These are absolutely beautiful, nice welds. It fits perfect on top of my trick flow heads. The only drawback other than price is there are no vent holes. I am having to make my own with baffles.


    Year: 1999 Submodel: GT Billings, Mt

    Helpful (4)

  • 5/5

    Installation Time: Less than 1 Hour

    January 05, 2014

    Perfect clearance

    A must have for your engine bay they look and fit perfect I put them on my 98gt with a pi swap price is good there hand welded and look great I'm a welder and I know what welds cost so these aren't bad they r a must have


    Year: 1998 Submodel: GT

    Helpful (2)

  • 5/5

    Installation Time: Afternoon

    October 19, 2013

    Moroso Fabricated Valve Covers

    I bought these when my new engine arrived with 11 bolt valve cover (Twisted Wedge) heads instead of the original 13 bolt models. I was hesitant at first since Summit had these for $600. But they were about all the aftermarket covers that were available. So I did a search and ended up here at American Muscle, where the 'covers were $400, and free shipping! They arrived a week later (I'm in California), and I carefully unpacked them. They were (and are) beautiful. The TIG welding is flawless. Almost jewel like! Plus the gaskets are the best I've ever seen! I can't say enough "good" about these covers. They look even better than they "work". And they work perfectly! The only caution is regarding your ventilation. These covers are designed to work on any Modular engine, no matter the application. Which means you will need to install your own PVC plumbing. Plus the oil filler is on the driver's side, rather than the passengers. My only "I wish" is I wish I'd polished them before I installed them! They really would look like "jewelry" if I'd taken the time to polish... (maybe this winter...). In any case, if you need valve covers for a Ford modular engine, that needs 11 bolt 'covers, these ARE the covers!! And American Muscle did a great job of handling the transaction, and getting them shipped to me as fast as possible. As a note, I've installed these on a 5.4L SOHC supercharged, intercooled injected MMR engine in my 1973 DeTomaso Pantera. NOT the usual Mustang application....


    Year: Pre-79 Submodel: Other Sacramento, CA, USA

    Helpful (4)

  • 5/5

    Installation Time: Afternoon

    September 21, 2013

    Welded Aluminum Valve Covers

    These valve covers are really beautiful pieces of work that were painstakingly and professionally welded, showing a high level of precision. I hung them on my wall for a week just because I didn't want them covered up by the hood of my car. Definitely a bit pricey, but I am so glad I finally purchased them for my ride. Great job to the craftsmen over at Moroso.


    Year: 2001 Submodel: GT Narragansett, RI, USA

    Helpful (3)

  • 4/5

    Installation Time: Full Day

    September 20, 2013

    You pay for the look

    Product looks good but a little pricey. Had a hard time getting the right fit and had to redo the gasket due to a leak. Ford dealer recommended that I stay with OME products due to a better fit but I went for the chrome look. I might have to stop and think next time. Only time will tell on how this products holds up and performs.


    Year: 2000 Submodel: GT Houston, TX, USA

    Helpful (4)

  • 4/5

    November 27, 2009

    Serious Covers

    These are for serious stangs. Make the entire engine look way better. Quality is top of the line. A bit pricey, but worth it.

    Billy Boy

    Helpful (7)

Related Mustang Categories