FREE 2 or 3-Day Delivery on Orders $119+ Details

Talk to a Mustang Enthusiast
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Win $3,000 in Store Credit! Enter Daily >

MP Concepts V-Style Rear Spoiler; Gloss Black (15-23 Mustang Fastback)

Item 415028
Call a Mustang Enthusiast at 1-877-887-1105
M-F 8:30A-11P, Sat-Sun 8:30A-9P
Our Price

$164.99 (each)

FREE Shipping Market Price $189.74 You Save 13% ($24.75)

Will this fit your Vehicle?

Select a different vehicle Help?
Update or Change Vehicle
Ship to: Ashburn - 20149
Sorry, please enter a valid US or CA postal code
We're sorry, zip can't be updated at this time.
Recommended Install Shops
How It Works

Add Local Shop Installation

Install Shops are available near Ashburn - 20149
Total cost of service $249.00
    Create a list
    Add to New List

    Saved - View your saved items

    We're sorry. We couldn't save this product at this time.

    or use

      Video Review & Installation

      Justin: The MP Concepts V-Style Spoiler that we have here today is a slightly more affordable take on that legendary S550 option and will be perfect for the 2015 and newer Fastback owners who are looking to make a statement with the rear of the car. Now, the V-Style option will offer an aggressive rake along with a durable ABS plastic build and gloss black finish offered right around that high $100 price point. Install's gonna go down one of two ways here, guys. If you have a factory spoiler installed, then chances are you will not need to drill. On the other hand, if your car does not currently have a spoiler installed, well, you will need to break out that drill. So either way, I'm just gonna call this middle of the road, 2 out of 3 wrenches on the difficulty meter just to be on the safe side, and maybe a couple of hours or so to knock out from start to finish. And as always, guys, hang with me for a bit and we'll walk you through that job later in the video.So, the OG MMD V-Series Spoiler has easily become one of the most popular for the 2015 and newer cars ever since it debuted back on that 2015 MMD car at SEMA. Now, both the unpainted and pre-painted options continue to be bestsellers here on the site. And because of that, it was a no-brainer for our Best Of video for the spoiler category for all S550s. Now, the reality is that spoiler does come in at a slightly higher price point, especially if you opt for the color-matched version. So, MP Concepts has come to the rescue here for us and offered a budget-friendly version that's gonna give you the same great styling that will ultimately just be a little easier on your wallet. But price point aside, the original V-Series shape is still there, guys. You get a very aggressive rake or angle for the spoiler itself, along with your cutout here in the middle, which I always thought vibed well with the design cues around the license plate area on the S550 cars. Now, looks aside, that notch or cutout here in the wing really does help with visibility out of the rear-view mirror, and that is something that sometimes goes overlooked. Now, the MP Concepts version is going to come together using what is called a blow molded ABS plastic construction, which as you guys can see, is going to deliver that iconic shape. And that material is very lightweight, it's still very durable, and you're not gonna have to worry about any cracking or spider webbing, if you will, like you would with a fiberglass option. Finally, as you can see here, gang, the spoiler is finished off in gloss black, which should offer a nice contrast with just about any color S550. But now comes a point in the video where we wanna segue into the install, show you what it takes to get this puppy installed on your S550 Fastback at home. So, without further ado, grab your toolbox and join us for a detailed walkthrough and tool breakdown now.Man: The tools you'll need for this project are a ratchet, a 10-millimeter socket, a magnetic Phillips head screwdriver, a trim removal tool, and possibly some rubbing alcohol, and a clean cloth, or you can use the supplied alcohol pads in the kit. Hi, everyone. Today we're installing a spoiler on our Mustang, so let's get started with the uninstall first. For our uninstall, we're gonna need a trim removal tool to remove nine push pins in this cover here. We'll also need to remove these two rubber bumpers here, the trim piece over the hood, the latch here, and two rubber grommets on the outside of the decklid. So, we're gonna insert our trim tool underneath the bottom of the latch here, and just pop it out. Then remove the two rubber bumpers just by screwing them out. Now we can remove our push pins simply by inserting our trim removal tool underneath the pin and pulling out. And just slip the handle through the slot. Now we can just pop the grommets out simply by pulling them in. Now we've got four nuts to remove, two here, and one on each end where the grommets used to be. So, we're gonna go ahead and use our 10-millimeter socket to remove those. And just one note of caution, when you get to the point where you're just about ready to remove the nut, it's a good idea to close the decklid as much as you can to keep the nut from falling into the trunk lid. Now with all of our nuts removed, we can go ahead and lift our rear spoiler off. Now you may need a trim removal tool to help pry it off depending on what type of adhesive is on the bottom of the spoiler.Before we get to the actual install, if you have a convertible or your vehicle does not come with a factory spoiler, you will need to drill into the decklid. In order to do that, they've provided some templates for you to be able to mount on the spoiler so you can line it up and know exactly where to drill the holes. To use these, you simply remove off the backing from the template and place the hole over the mounting hole on the spoiler. Now, there are four mounting holes on here, so they provide you with four templates. Once you've got the templates installed on the spoiler, you can go ahead and test fit it, get it all lined up. And then once you get it lined up, we'll put some tape on the template itself to hold it onto the car, and then we will remove the spoiler, and then you'll have the spots exactly where you need to drill.Now, we'll go ahead and place the spoiler on the vehicle. Get it set where we want it, make sure that it's centered on the decklid. And now we can use some painter's tape to hold down those templates to the decklid. And we'll tape both sides of the template down just to make sure that it stays straight. Now you can gently lift up on the spoiler, making sure that the templates stay in place. And now you have the exact location of where these holes need to be drilled. Now that we have the exact locations marked on our decklid of where we need to drill, you can use your 7/32 drill bit and go ahead and drill those holes and proceed with the rest of the install. Now that our holes are drilled, we can go ahead and clean the bottom of the spoiler with some rubbing alcohol, make sure that there's no residue on it, and prepare it for the double-sided tape. Once you've got that cleaned, it's recommended that you use the supplied adhesion promoter and just go around the outside edge of the spoiler where the tape is going to be put, using a small brush to spread it out. And then once it dries in about 10 minutes or so, then you can apply the double-sided tape to that. And one trick I like to use is when you lay down the tape, go ahead and peel back about an inch or so of the backing paper so that when you actually set it on the vehicle, it's not sticking to it, so that you can finish putting it in place properly, and then you can remove this afterwards.Now, since we're not doing a permanent modification to our vehicle, we're not actually going to apply the tape, but I'll show you how to do it. So, you're gonna apply the tape right along the edge like so, and you're gonna go all the way around. And you can see where the line is at where you need to put it. And then, like I said, once you get it installed, go ahead and peel back about an inch or so of the paper backing, and let it hang outside. That way when you set it on the vehicle, all you have to do is just pull that runner and everything is good. And the last thing to do before you actually put it on the vehicle is apply these rubber pads over each of the mounting holes. And to do that, you simply remove the brown backing paper, place it over the hole, and then when you're ready to install it, you remove the red side.Now we can go ahead and place the spoiler on the decklid, and using the supplied hardware and a Phillips screwdriver, we can go ahead and get this secured. Now we can go ahead and set our spoiler onto the decklid. Now, if you have it taped, you will need to be a little bit more careful about where you place this, making sure that your holes are lined up. And then, like I said, using the supplied hardware and a screwdriver, I also recommend that you make sure that it is a magnetic screwdriver because if you drop it into the decklid on the backside, it's pretty much lost forever. Now, once you've got all the hardware installed, you can go back through and make sure that you tighten everything down, again, using your Phillips head screwdriver. Now we'll go ahead and reinstall our decklid trim using the original hardware. Reinstall our two grommets. Reinstall our two rubber bumpers, and finally, our hood latch trim.And that wraps up our review and install of the MP Concepts V-Style Rear Spoiler in Gloss Black, for your '15 to current Mustangs. Thanks for watching. And remember, for all things Mustang, keep it right here at

      Product Information

      Features, Description, Reviews, Q&A, Specs & Installation

      Features & Specs

      • V-Style Rear Spoiler
      • Aggressive Track Inspired Styling
      • Notched Design for Maximum Rear Visibility
      • Pre-painted Gloss Black Finish
      • Durable ABS Plastic Construction
      • Drilling May Be Required for Installation, See Details Below
      • Does NOT Cover Holes Left by GT/CS Spoilers
      • Fits 2015-2023 Fastback Ford Mustang Models


      MP Concepts V-Style Spoiler. Add aggressive track inspired styling to the rear of your 2015-2023 S550 Mustang by installing a MP Concepts V-Style Decklid Spoiler. The steep rake of this Spoiler has a larger than life intimidating design that further accentuates the sculpted lines of the Mustang's rear perfectly. The notched center section not only looks great, but also helps with rear visibility. Best of all, this Spoiler arrives pre-painted gloss black straight out of the box!

      Superior Quality. Manufactured from blow molded acrylonitrile butadiene styrene (ABS) material, this MP Concepts Rear Spoiler was made to OEM specifications for a perfect fit. ABS is an extremely strong material known for its light-weight, superior durability and impact resistance. Unlike some other rear wing options on the market, this Spoiler won't chip or crack like fiberglass and will last for many years to come.

      Drilling May Be Required. The MP Concepts V-Style Rear Spoiler was specifically designed to reuse the existing holes left in the deck lid by the stock wing (if so equipped) on Fastback models. The spoiler easily installs with a combination of hardware and 3M automotive bonding tape. A drilling template is included for those models not equipped with a factory installed wing. Convertible models equipped with a stock wing will not be able to reuse the factory holes and will require additional drilling for proper installation.

      Application. This MP Concepts V-Style Rear Spoiler; Gloss Black is designed to fit 2015-2023 Ford Mustang Fastback models.


      MP Concepts 415028

      CA Residents: WARNING: Cancer and Reproductive Harm -

      Installation & What's in the Box

      Installation Info

      What's in the Box

      • (1) Rear Spoiler
      • (2) Templates Strips
      • (4) Foam Pads
      • (4) Phillips Head Screws
      • (4) Flat Washers
      • (2) Alcohol Pads
      • (2) Adhesion Promoter

      Customer Reviews (98)

        Questions & Answers

        10 More Questions